Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Any experiences with (chemical) browning, bluing, black oxide ?  (Read 937 times)

0 Members and 1 Guest are viewing this topic.

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46

Hi, has someone experiences with chemical browning to prevent the reeds from oxidation?
Many reeds are originally blue, i guess by heating the steel to a certain degree.
I want to restore a Hohner Pianet (ok, no melodeon but the same reeds) where the reeds are quite rusty.
I would clean them wit a fiberglas pen and wash them in aceton, but would like to prevent them for the future from further oxidation.
Maybe the reeds in an accordeon could be oiled, but not so the reeds in a pianet, because the "trigger" is a kind of sticky sucking of the reed with a rubberlike pad. Any oiling would kill this effect.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #1 on: June 10, 2026, 08:13:15 AM »

What is a pianet?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #2 on: June 10, 2026, 09:22:57 AM »

It's an electric piano (Not electronic piano, very different thing!) built by Hohner that uses electromagnetically amplified reeds to produce a sound. The reeds are plucked by a little sticky pad mounted to the end of each key, which dampens the vibrations when the key is released. They're fascinating things, back from when Hohner was busy doing mad and dubiously successful experiments with electric musical instruments, such as the multimonica (two-manual keyboard instrument, valve synthesiser on top and reed organ on the bottom) guitaret (also using plucked reeds, but more like a complex amplified thumb piano) and the clavinet, an electric clavichord, which actually managed to gain pretty significant popularity (think Stevie Wonder). There were several models of pianet produced, and they're still readily available second hand, though they're starting to show their age.They've got a great sound, and they're cheaper than a Wurlitzer or a Rhodes!
Logged
Oops! All Hohners

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #3 on: June 10, 2026, 10:08:14 AM »

I've just managed to find this image of pianet reeds in an eBay listing, interesting.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #4 on: June 10, 2026, 10:18:53 AM »

Guided tour of a pianet here:  https://www.youtube.com/watch?v=fwvRdl6ZPRE
And various demos on Youtube, including https://www.youtube.com/watch?v=qX-H3M-kzIk&list=RDqX-H3M-kzIk&start_radio=1

Cool instrument!  8)
Logged
Pas de lieu Rhone que nous

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #5 on: June 10, 2026, 10:53:51 AM »

Yes they look like accordeon reeds, but has a 3mm bore for the screw at the end. I guess the tuning process is the same.
Problem ist that the sticky pad lifting the reed wont "suck" good if the reed ist not a polished, plain surface.  (at least at the part the pad is touching the reed).
One can buy them as spare parts, but 30€ a piece is not a realistic way if one wants to change them all.
I am pretty shure i could clean and polish them but without any treatment for antioxidation this would not make much sense.
And oiling is no option because this will prevent the pads from "sucking".

There are chemical products like "Ballistol Quick browning".
I am aware that this will ad some weight while it generates oxidation on the surface also, but if i tune the reeds afterwards, this should be problem.
In generall, are there ways to treat accordeon reeds so they are protected from oxidation?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #6 on: June 10, 2026, 11:26:02 AM »

I'm finding this utterly fascinating!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #7 on: June 10, 2026, 11:49:34 AM »

I've never tried chemical blue, but another treatment worth considering as to wipe the cleaned surface with phosphoric acid.  This is sold in the UK as Jenolite.  You leave it in contact with the metal for a while, then dry it off with a cloth. It leaves a completely dry surface.  It's usually used prior to painting for metalwork exposed to the weather, but might work without further protection in a dry environment.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #8 on: June 10, 2026, 07:15:54 PM »

This thread is of use to me as I have a Hohner pianet I need to restore as well. Thanks for the input folks.

Also a fun fact; the zombies used the planet quite a bit, as did the beatles. Their value has skyrocketed in recent years for some reason. I got mine for about $100 in 2021, now they wildly expensive.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #9 on: June 10, 2026, 10:25:12 PM »

For years I have used 3-in-1 dry lube successfully for protecting reeds. I use an eye contact case half filled with acetone (maybe a half teaspoon) and add a drop of the dry lube into the acetone so it is very diluted. If you use a brush or tiny applicator tip it dries almost instantly and leaves a super thin layer of protection. It is probably only a few molecules thick. You can test it on a piece of glass and see that it indeed leaves a film on the entire wetted surface but dries in seconds. Best of luck.

Scott
Logged
too many boxes...please buy one, or two, or

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #10 on: June 10, 2026, 10:36:58 PM »

@Ross,
in what state are your reeds? Do yours have a pads complete?
EP service in the netherlands are selling replacement sticky pads, they say those are even usable if the reeds are a little rusty and bring back the bass tones.
https://ep-service.nl/pianet-t-m-duo-sticky-hammers
For myself i do not know wich path to go, i have the clavinet/pianet duo and while the pianet needs restoring, the clavi part is fine. I am pretty unsure if its worth, i like the sound of a pianet a lot, but the action is kind of quirky, i mean if you press a key, a "sponge" is sucking and lifting a reed, thats quite different to a normal hammer action where your dynamic keypress is hitting a string or equivalent.
Logged

Stefan

  • Member
  • *
  • Offline Offline
  • Posts: 46
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #11 on: June 10, 2026, 10:51:19 PM »

@hickory-wind.
Thanks for the suggestion. Do you know whats the main ingredient of the dry lube is? I guess its PTFE (Teflon).

@Theo, thanks to you also. Here in Germany Phosphor Acid is known as rust-converter but there are different concentrations and i could imagine its quite agrressive. But maybe i should distance from the chemical bluing, i habe no idea if it would alter the flexibility of the reed.
Thermal bluing would be the royal road, with the exact heating and shock cooling this seems to be possible, but again, maybe the flexibility or stability would be altered.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #12 on: June 11, 2026, 03:12:45 AM »

Yes. I believe it is PTFE.
Logged
too many boxes...please buy one, or two, or

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #13 on: June 11, 2026, 08:44:28 PM »

You can try "gun Blue" compound available in either liquid or paste from any gunshop. Also several brands available from Amazon.co.uk, just search "Gun Blue" Prior cleaning and degreasing is needed as you have already done. I think all the compounds I have used in the past have called for the part to be washed and lightly oiled after blueing. For info these products are used by hunters and firearms people to touch in areas or scratches of damageon airguns and firearms or to "blue" home made parts, all are caustic and due care (gloves Goggles) should be used.
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #14 on: June 12, 2026, 05:30:18 PM »

As they are already rusty why not try the traditional gunsmiths method of rust bluing/ blacking.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #15 on: June 13, 2026, 01:39:47 PM »

Just for info "rust bluing" is done by putting the pre-rusted part into boiling water, it is important that a large amount of water is used as the water must remain on the boil throughout. This in fact browns the oxide and requires drying and oiling afterwards. The most notable use of this practice being the Brown Bess Musket in the 1600-1700 periods. Rather than using "natural" rust (iron oxide) the oxide surface was created using salts in a wood cabinet.
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Any experiences with (chemical) browning, bluing, black oxide ?
« Reply #16 on: June 13, 2026, 04:10:41 PM »

I tried chemical bluing solutions on an old blued rifle barrel, and results were not impressive to say the least.
I think you're overthinking it.

Soviet reeds are often filed on both sides, so there's no bluing. Their steel is also, ceteris paribus, a bit more prone to rusting compared to Italians (even though I much prefer the sound of top end Soviet reeds).
I haven't spotted any significant reed pitting in practice, inside the box. The higher rusting likelihood I've noted only while reeds are in storage.

If you get reeds rusting inside your box, you ain't squeezing it enough.  :||:
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal