Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner double bracket  (Read 347 times)

0 Members and 1 Guest are viewing this topic.

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Hohner double bracket
« on: June 21, 2026, 01:07:54 PM »

I'm hoping for a favour from someone who uses one of these older style double brackets on their Hohner, or who has one in a box of bits. I'm interested in knowing the distances between the screw hole centres, but can't seem to find the info online.

My cousin's box has old screw holes on the casing where a bracket like this has been attached at some point in its history. She's thinking of reinstating it, but ideally doesn't want to make a set of new holes. It looks from photos as if it might be the right bracket type, but the measurements would confirm it.

Thanks in advance!



Logged
Vintage Double Ray C#/D

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner double bracket
« Reply #1 on: June 21, 2026, 03:04:46 PM »

About 16.5mm center-to-center between 2 holes on same edge, 22.5mm to the 3rd hole.
Logged

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Hohner double bracket
« Reply #2 on: June 21, 2026, 03:12:12 PM »

Brilliant, thank you. She didn't want to waste money on something the wrong size, but it is the same.
Logged
Vintage Double Ray C#/D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal