Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning Hohner HA-models – how do you proceed?  (Read 740 times)

0 Members and 1 Guest are viewing this topic.

André

  • New Starter
  • Offline Offline
  • Posts: 1
Tuning Hohner HA-models – how do you proceed?
« on: July 02, 2026, 07:34:12 PM »

Hi everyone,

I’m currently restoring a Hohner HA-114 and I’m trying to figure out the best approach to tuning it.

Unlike the Pokerwork/Erica models, the reed blocks appear to be glued in, making access to many of the reeds extremely limited. To reach some of them through the register openings it almost looks like the keyboard and pallet mechanism would need to be dismantled.

So I’m wondering how experienced repairers actually handle these instruments.

Do you:

* tune everything in situ using very thin files and limited access?
* partially dismantle the keyboard/register mechanism?
* remove all the reed plates, tune them on a tuning table, then rewax them back into the blocks?
* or is there another method I’m missing?

I’m interested in hearing what is considered best practice rather than just what is possible.

Thanks in advance!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #1 on: July 02, 2026, 07:42:57 PM »

I tune the reeds I situ using the same tools and methods as for any other upright reed block. The tools required are simple: a good quality needle file, a reed scratcher,  a support plate and a reed hook for lifting the tip of the inside reed. The support plate and reed hook are simple to make, a good Swiss needle file is worth the price in time saved.

What is more tricky is rewaxing on glued in reed blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #2 on: July 02, 2026, 10:15:18 PM »

Best practice is what Theo has described. I actually find HA114s to be some of the quickest and easiest boxes to tune because of their light weight and facility of the stops. The treble end (or bass end) is lifted on and off a set of tuning bellows for quick and easy tuning (IMHO). I generally find that it’s folks who only tune with the blocks out of the instrument that find HA114s tricky. It’s the waxing that can be a challenge, as Theo mentioned.
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #3 on: July 03, 2026, 09:19:25 AM »

The key bit of kit is the reed hook (you can make one from piano wire)..also a set of bellows you can sit the end on is quite helpful. FWIW in my opinion the internal design (two blocks glue adjacent to one another) is horrible. There ought to have been one block in the middle and two flat reed mountings either side.

AndreS

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #4 on: July 03, 2026, 12:06:26 PM »

Thanks for sharing your knowledge. I imported a mint 114 from Canada recently. It even still have the plastic attached on the bass strap, but is clearly out of tune. I will give it a try!
Logged
Corso De Luxe (2x G/C, A/D)
Corso (5x C/F, 3x G/C, E/A)
Corona III (A/D/G)
HA-114 (2x G, C)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #5 on: July 03, 2026, 01:10:28 PM »

Please report back if you further questions once you get started.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #6 on: July 04, 2026, 01:22:42 PM »

nothing much more to add to what has been said except on a 114 it can be tricky to get the inside reeds through the reed slot to sharpen them. flattening is easier. So try to go carefully when flattening the reed as if you go too far you have to file the tip to sharpen. Also the tiny high reeds can be tricky especially if they are fitted reversed. sometimes easier to take these out to tune. Ive generally found original hohner factory tuning to be slightly sharp and with rather more tremelo than i prefer so fortunately in my case im mostly flattenening reeds with the scraper rather than sharpening with the file. Start on the reed bank under stop 1 (lows) and stop 4 (highs) . these are easier to access and tune and will give you a feel for how they respond to the tuning tools. then do the two mids which are a little harder to access. I tune with the bellows of the instrument suspended on a frame with the bellows nail holes taped up. make sure the stop of the reed bank you are tuning is all the way out. if it slips a little and goes partly closed it will restrict ait flow and you'll get a false reading. once treble end is sounding sweet tune bass end to match. If im tuning treble end to "cajun tuning" (3rds and 7th at -15) i'll match this on the bass end and tune the 3rds of the chord -15 for a sweeter chord. If treble end is regular tuning i'll just flatten the 3rd note of the chords by 4 or 5 cents just to go a little way towards a sweeter chord.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #7 on: July 06, 2026, 06:46:33 PM »

Absolutely as Chris says.
You can use the bellows of the instrument as a tuning box.
 Take a large piece of plywood or MDF. Cut out a section slightly smaller than the outer dimension of the bellows. Clamp or screw it to the bench with the cutout section overhanging the edge of the bench. Remove the treble end of the instrument and slide the first bellows fold into the cutout so that the bellows is hanging down. Replace the treble end sound the note and take a reading. Remove treble end, tune the reed. Repeat ad inf.
Same for the bass end.
I tune all my boxes this way.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Tuning Hohner HA-models – how do you proceed?
« Reply #8 on: July 06, 2026, 07:42:22 PM »

Absolutely as Chris says.
You can use the bellows of the instrument as a tuning box.
 Take a large piece of plywood or MDF. Cut out a section slightly smaller than the outer dimension of the bellows. Clamp or screw it to the bench with the cutout section overhanging the edge of the bench. Remove the treble end of the instrument and slide the first bellows fold into the cutout so that the bellows is hanging down. Replace the treble end sound the note and take a reading. Remove treble end, tune the reed. Repeat ad inf.
Same for the bass end.
I tune all my boxes this way.

yes this is the method rees taught me and i works great. so i made many cutouts in plywood to suit all different bellows sizes. then i just bought a "workmate"...portable fold up bench. and clamped two pieces in the jaws....easy to move the pieces to suit any melodeon. glue two pieces of wood on bottom of each piece so jaws have something to grab and move along the jaws depending on size of bellows. ive glued felt on to the edges that slide into the bellows folds to protect the bellows.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal