Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: A few questions regarding Hohner HA-113 components and fixes  (Read 1004 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144

I tried hunting around a little but couldn't find an answer quickly enough (I'm on a bit of a timeline panic).
Does anyone know what the best thickness of felt sandwich is used for the pallets of a 113 or 114? I'm awaiting the arrival of a 113 that looks time capsuled from the 50s but I want to be prepared to replace the felt before I have to leave for a work trip.

I hopefully have enough valves still on hand to get me through replacing the whole set, so that part should be ok.

The other thing I'm curious about strap hardware.
I'd like to install a shoulder strap mount on this even if that may look like sacrilege. Any ideas for the ideal dimension of strap bracket?

What bellows gasket size is ideal?

Lastly, I've seen people talk about installing magnets to keep the stops up. I don't yet know if this box suffers from the loose stops issue, but I'm curious if anyone has images of how that works. Ive used very small rubber o rings on the stops before but they're a little annoying to deal with, shimmying them up and down, and I really don't enjoy the clothes peg trick.

So to recap, my questions pertain to:

-felt pallet thickness
-strap brackets for this box
-bellows gasket dinensions
-magnets for stops

Thanks!
« Last Edit: July 08, 2026, 01:23:50 PM by Ross Dubois »
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #1 on: July 08, 2026, 02:15:25 PM »

pallet felt thickness - whatever thickness you use will require resetting of button height as the original stuff that Hohner used was very thin indeed.  Generally, the only reason you'd replace padding on those models is to quieten the 'clackety-clack' of the pallets.  The only time I've seen them leak is if the fondo is warped/curved (it happens more often then you'd think).  I use a 2mm felt/leather combo from Carini and even that requires the button height to be reset.

strap brackets - there is only room for single strap brackets (rather than the ones that are curved or V-shaped).  What I've found works best are those little "O" or "D" rings that you get from the hardware store for hanging pictures.

gasket - you can make fit most gasket strip sizes just fine.

magnets - I use rare earth magnets.  You drill holes of the same diameter as the magnets in the inside face of the treble end frame until you reach the shaft of the stop knobs (you have to first unthread the stops from the wooden blocks attached to the sliders and remove them before drilling). Re-thread the stops back into the wooden slider blocks and pop your magnets into place so that they make contact with the metal stop shaft.

 
Logged
C#/D player

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #2 on: July 08, 2026, 05:40:09 PM »

Many years ago, before Rare earth magnets were a thing, I addressed the loose stop problem with some home made springs, as per the photo. Very satisfying clunk as the go into place.

At the same time made some single strap strap brackets (see photo - about time to get the brasso out I think). Problem is that there isn't room for a typical two strap (V shaped) bracket to fit there.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #3 on: July 08, 2026, 06:47:00 PM »

I love those springs!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #4 on: July 08, 2026, 06:54:31 PM »

Matt, thanks for the info man! I was aware that the action geometry would change as it tends to happen to all hohners when the felt is upgraded beyond the typical, like, 1.5mm chamois facing, but I hadn't considered that increasing the thickness to say, 4mm could potentially offset the geometry of the pallets significantly worse and indeed would not be easily adjusted like it would on a 2 voice box. If you were to aim for thicker felt in order to soften the clacking immensely, would you have to shim the actual metal action mechanism away from the soundboard area, as well as the keyboard in order to get the felt to sit fairly flat when closed?

I'm probably going to just go for 2~2.5mm to avoid making work for myself, and it will probably still make some clapping to an extent but I am curious what the fix is when aiming for thicker felt in this context.

The bracket hunt is a problem indeed. I've seen folks use the picture frame D rings which seems easiest, but I have seen a couple boxes with single loop purpose made accordion brackets. Where theyd be installed seems more of a challenge than the D ring route

There are so many gasket sizes, but perhaps 3mm thick by 5mm wide is probably fine maybe?

Thanks for the magnet image, that's exceptionally helpful. I'll have to think about that. Very elegant.

----

Clive,

that's brilliant, I really like that clip/spring design. Did you have to manually bevel the wood for the stops? I only ever seen the stops with 90 degree angles so I imagine that's the case, but man that must be very satisfying to lock the stops in place. I would love this option if it was a ready made component, but I doubt I'd have the time to fabricate it any time soon. It's nice as it doesn't require any modification to the body beyond the beveled stop slides.

That strap bracket is nice too. I found a couple ready to go purpose built brackets but I don't know what the ideal width is here.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #5 on: July 08, 2026, 09:21:39 PM »

I’m not exactly sure what you mean by shimming the metal mechanism…thicker pallet facings will result in the buttons sitting lower than normal and would require resetting by way of gentle bending of the lever arms leading to the button. All of this I would do before glueing the pallets back to pallet arm. I would also make sure to clean out the pallet channel so that the lever can move freely in and out of the pallet (before it is glued in place) to avoid creating small air leaks when the lever is pushed into place (what can happen, if the fit between lever and channel in the pallet arm is too tight, is that when the lever is pushed into place it will compress the felt/leather facing a little and then as it uncompresses, it can actually marginally lift the facing off the fondo and create an air leak that you don’t notice until it’s all put back together).

I wouldn’t use 4mm on a HA11x. 2mm does a surprisingly good job at cutting down on pallet noise.
Logged
C#/D player

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #6 on: July 08, 2026, 09:50:04 PM »

I was thinking about what happens when you press a button and the pallet opens on a long 4 voice pallet. It lifts at an angle and obviously the bottom is closest to the sound board even when fully open. My castagnari has those useful cantilevers that allow the pallets to lift more parallel to the board to avoid that issue and potentially reduce the amount of pad lift you'd need for the lowest hole to sound properly. Tons of boxes have that anyway, but yeah just for the example.

If you have a very thick felt on a pallet like this, I imagine the bottom of the pallet will contact the sound board before the top closes and in extremes you'd have the top of the pallet only partially closed. Yes the extra stack height of the felt would cause the button to lower as available lever throw would diminish as you remove the room the lever normally travels with thick felt in its place.

Anyway, I was imagining the pallet, even if you adjust the button height with some light bending, could still not sit flush at that point if you used extra thick felt. I think I saw someone used 5mm padding and ran into something problematic like this before and they ended up having to shim the action and keyboard with a strip of wood in order to restore some available lever throw to the mechanism.

It might be one of those things I'd need to draw as im probably blathering.

In any case, it's probably a moot point as I won't be using 5mm or 4mm thick felt. Just a mental exercise in the end while I ponder why I've seen incredibly thick pallet felt on some of these boxes
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #7 on: July 09, 2026, 01:34:20 PM »

My take on pallet facings is: if a single layer of skin was good enough when it was manufactured..then it's good enough as a replacement…also easier because you don’t have to mess around with button height.

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #8 on: July 09, 2026, 01:49:39 PM »

i find 2.5mm works good. 1mm of leather and 1.5mm of wool felt. this cushions the action and reduces clack. on bass spoons i just use the leather without felt as the clack isn't an issue. since you are usually removing all the pallets to resurface them any geometry issues always seem to be sorted when you reglue the pallets onto the pallet arms. At least that's been my experience. Theo did a nice video on youtube about this process on a two row. You could use 1mm leather without the felt and i will probably be an airtight seal.
Logged

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #9 on: July 09, 2026, 06:28:14 PM »

Hey Chris,
I've re-felted pallets many, many times, but usually their pallet lengths are not as exaggerated as say, the 114s. I mostly have done 2 voice boxes but a few compact 3 voice boxes as well but with smaller pallet facings and different action mechanisms. The hohners I've done have been very easy because of the 'pliability' of the action so raising and lowering button height after has been a cinch. In this case, I'm sticking with 2.5mm felt, but I do expect that very thick padding for levers like 114s would really alter the sitting position of the pallet in the end. But luckily, I won't have to go that route. Some people have, however, and I am curious about their approach when using 5mm padding.

I imagine that changes how the springs manage the action a slight bit too, given the heaviness of a thick strip of felt and leather

Anyway, I'm still interested in seeing what folks have done with their hohner one rows as far as neck strap anchors and mechanisms for keeping the stops up. Pictures would be great as it's hard to find much online in general.

I ordered some D ring clips as some folks have suggested, as well as a set of very small purpose built accordion strap brackets and will see which will do the job best when they both arrive
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #10 on: July 09, 2026, 10:26:58 PM »

2mm or 2.5mm on 114's has worked for me on many 114's. tried thicker once and felt clumsy and leaked. D rings for shoulder straps. easy to obtain in US but right size hard to source in UK (either too big or too small) 6mm round magnets available on ebay from china for stops. drop magnet in hole after drilling. fill on top of magnet for a neat finish. If you have a pacemaker maybe check with a doctor? eek.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #11 on: July 10, 2026, 08:52:43 AM »

A couple of points.

I love the spring arrangement to keep the stops in place!
 I'm going to try that.
If you look at the shape of the arms, the slight curve means that it will always contact the pallet close to the middle of the curve. As the arm are different lengths depending on the number of stops it should always maintain the geometry provided the felt and leather pads aren't a ridiculous thickness.
I'm assuming you remove the pallets to refelt and clean out the slots.
I found a lot of this when building Gnasher. Getting the geometry right for such long pallets was a lot easier with Hohner's versatile mechanism
https://youtu.be/l3xBhKjsHjw?is=DV9oKJb_GSC7ieho
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #12 on: July 10, 2026, 12:23:07 PM »

Clive,

that's brilliant, I really like that clip/spring design. Did you have to manually bevel the wood for the stops? I only ever seen the stops with 90 degree angles so I imagine that's the case, but man that must be very satisfying to lock the stops in place. I would love this option if it was a ready made component, but I doubt I'd have the time to fabricate it any time soon. It's nice as it doesn't require any modification to the body beyond the beveled stop slides.

That strap bracket is nice too. I found a couple ready to go purpose built brackets but I don't know what the ideal width is here.
[/quote]

Yes, manually added the bevels. It did work without the bevel, but the bevelling made the operation a lot smoother.

Once I'd worked out the concept and gathered the materials and tools, the whole operation only took a couple of hours.
The trick with the springs is to start at the central loop (where the screw goes) and to to work out from there.
Logged

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #13 on: July 10, 2026, 04:06:58 PM »

Footman loops ought to work for attaching a shoulder strap, if you can find one with the right strap width and external dimensions.

This place does good quality equestrian supplies and makes brass loops for several different strap widths, but they're not very forthcoming on the external width. But if it might be of interest, I'm sure they'd tell you.

https://www.abbeyengland.com/en-gb/equestrian-products/harness/harness-fittings/staple-brass-3-3-4-7-19mm-b070aex
Logged
Vintage Double Ray C#/D

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #14 on: July 19, 2026, 05:51:48 PM »

These appear to be very precisely "drilled" holes. Were they drilled, or did you use a mill end, etc.? My guess is not hand-held.

Any attempt I make at drilling soft wood usually ends up with splinters and a raw edge.

Do I understand correctly; unscrew the metal shafts from the shutter?

Logged
"It's what you learn, after you know it all, that counts." John Wooden

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: A few questions regarding Hohner HA-113 components and fixes
« Reply #15 on: July 19, 2026, 07:33:08 PM »

These were drilled by hand using a handheld, battery-operated drill. You just have to be steady, making sure you’re drilling at a 90 degree angle to the wood face, and go slowly and carefully. Using a drill press would be even better. The frames on these Hohners are not made of softwood. Use an awl to make sure the centre of the hole you will be drilling is perfectly centred within the thickness of the wood frames - there is very little room for error.

Yes, I unscrew the stops from the wooden blocks so that the hole I drill meets up with the channel that the stops slide up and down within. This way, when the magnets are popped into place (after the stops have been reinserted), they make contact with the shaft of the stops, which is what keeps them from sagging.
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal