Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Porework fingerboard repair or replace?  (Read 882 times)

0 Members and 1 Guest are viewing this topic.

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Porework fingerboard repair or replace?
« on: July 25, 2026, 02:54:29 AM »

Can my wooden fingerboard for a pokerwork be repaired? Any suggestions would be appreciated. See attached photo. Thanks.
Logged

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Porework fingerboard repair or replace?
« Reply #1 on: July 25, 2026, 10:33:39 PM »

It looks like the broken off bit is complete so, if it were me, I'd remove the keyboard, glue the detached bit back in (PVA wood Glue), and then refit it.
Might need a bit of fettling to hide the join, if you worry about that sort of thing.
Logged

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Porework fingerboard repair or replace?
« Reply #2 on: July 26, 2026, 01:33:29 AM »

The broken off piece was actually 5 pieces. It took a while but I glued it all back together like a jigsaw puzzle. I hope it all holds. Thanks .
Logged

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Porework fingerboard repair or replace?
« Reply #3 on: July 26, 2026, 01:17:02 PM »

In that case it might be worth trying to re-enforce it with some very thin bit of wood on the underside, covering the whole repaired area. Limited as to how thick that can be because, it could make getting the keyboard on an off difficult (or impossible) and ultimately could hit the upper edge of the levers.

Actually, thinking about it, you could re-enforce it with a thin sheet of metal epoxied to the underside. - stronger and thinner than using wood, though a little harder to work.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Porework fingerboard repair or replace?
« Reply #4 on: July 26, 2026, 01:41:55 PM »

You could also try one or more layers of thin, coarse cloth or mesh and super glue.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Porework fingerboard repair or replace?
« Reply #5 on: July 26, 2026, 07:30:10 PM »

You could also try one or more layers of thin, coarse cloth or mesh and super glue.

I would go with the cloth and glue approach....never repaired a keyboard this way but have succesfully repaired similar thicknesses of wood. My choice for reinforcement would either be woven bandage material or a piece of an old (lightweight) polyester-cotton shirt and I  simply painted over it with a wood varnish- soaks through and effectively bonds the threads. Obviously on the inside of the keyboard!
Logged

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Porework fingerboard repair or replace?
« Reply #6 on: July 26, 2026, 11:38:05 PM »

Cloth & glue would certainly be easier than my sheet of metal idea.
Logged

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Porework fingerboard repair or replace?
« Reply #7 on: July 27, 2026, 01:09:27 PM »

What caused it to break like this, into many parts? If it was rot or wood worm than the solution might be different.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Porework fingerboard repair or replace?
« Reply #8 on: July 27, 2026, 03:32:50 PM »

"What caused it to break like this"

It's quite common to find wooden fingerboards in this sort of damaged condition. Probably caused by the constant hammering of finger ends against the weak points between the buttons.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Porework fingerboard repair or replace?
« Reply #9 on: July 27, 2026, 05:05:59 PM »

Question for fettlers:

How would you prep the surface for the fabric/glue method? Smooth?  Rough? Grooved?
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Porework fingerboard repair or replace?
« Reply #10 on: July 27, 2026, 05:44:19 PM »

Question for fettlers:

How would you prep the surface for the fabric/glue method? Smooth?  Rough? Grooved?

Never thought of surface preparation before! Using polyeurethane varnish, I just painted it on, laid the cloth patch on it and gently painted more varnish on top.
Varnish has pretty good adherance - it soaks into unvarnished wood.
Logged

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Porework fingerboard repair or replace?
« Reply #11 on: July 27, 2026, 10:03:23 PM »

"What caused it to break like this"

It's quite common to find wooden fingerboards in this sort of damaged condition. Probably caused by the constant hammering of finger ends against the weak points between the buttons.
Another good reason for limiting the button travel on these things!
Logged

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Porework fingerboard repair or replace?
« Reply #12 on: July 28, 2026, 01:17:24 AM »

Thanks for the suggestions. I limited the action per Lester Bailys excellent hot rodding video I found on this site. Now I am going to try the fabric /glue method.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal