Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pokerwork age  (Read 467 times)

0 Members and 1 Guest are viewing this topic.

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Pokerwork age
« on: July 26, 2026, 08:14:46 PM »

Hi. I am trying to figure out the age of my pokerwork. Looked inside and out for a serial number. Can't find any. It's a G/C. Thanks.
Logged

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Pokerwork age
« Reply #1 on: July 27, 2026, 04:25:42 AM »

These are generally considering to be a forerunner to the Pokerwork. Sometimes you'll see them called "presswood" or "pressedwood". My understanding is that there were both pre-war and post-war issues in this design. If the screws that hold the bass panel on run through raised washers that form the "feet" of the melodeon, I'm told that is a pre-war (probably 1930s) model. If the "feet" are chrome hemispheres that are mounted separately from the screws that hold on the panel, that is likely to be a 1950s issue. By the 1960s Hohner had switched to the familiar black and gold Pokerwork design, I believe.

I am prepared to be corrected by someone who knows better!
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Pokerwork age
« Reply #2 on: July 28, 2026, 01:20:21 AM »

The "feet" are mounted separately so it appears to be from the 50s. Thanks.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal