Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: source for erica grill cloth? (US)  (Read 782 times)

0 Members and 1 Guest are viewing this topic.

MikeSchway

  • Member
  • *
  • Offline Offline
  • Posts: 11
source for erica grill cloth? (US)
« on: August 02, 2026, 06:08:25 PM »

Greeetings.  I've recently acquired a beautiful early 60s black Erica with the flush grill.  At some point, the original grill cloth had shrunk away from one edge leaving a gap with the cloth too tight to stretch back into shape.  I suspect brief localized heat damage. No visible scorch marks and all reed wax is intact; perhaps it got too close to a lightbulb?

Regardless of the cause, I need to replace the cloth.  This is a somewhat loose weave, silver in color; common through the 60s with both Ericas and Coronas.  Does anybody know where I can purchase a small quantity (maybe one square foot?) My usual suppliers (Liberty Bellows, accordionary.com and the various Hohner C-shops) don't seem to carry it. I want to avoid thick multi-layer cushony material and conventional amplifier speaker grill cloth.  I'm in the US, but an EU/UK source is OK providing they're able to ship. 

Finally, what adhesive should I use?  I'm guessing a thick PVA (water-based) glue like Aileen's "Tacky-Glue" would be a bad idea since it would be in contact with the metal grill and might cause local rusting.  E-6000 might be a bit too thin and permeate too far into the cloth. 

Ideas?

Cheers.
--Mike
« Last Edit: August 02, 2026, 06:21:34 PM by MikeSchway »
Logged
--Mike Schway
Bellingham, WA US

Personal arsenal:  Marc Savoy Acadian (C,D, wet D), Corona II (60s GCF, newer GCF and FBE), Far, FAR too-many pokerworks (GC, AD, DG), Erica GC, Castagnari Dinn3 C#D, Merlin DG, Lisheen C#D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: source for erica grill cloth? (US)
« Reply #1 on: August 02, 2026, 06:19:34 PM »

I use a bookbinders material.  In the uk it’s called mull. It’s an open weave calico with a stiffener.  It’s very similar to Hohner grill cloth from the 1930s, but also looks good on later models.  It’s quite cheap.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

MikeSchway

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: source for erica grill cloth? (US)
« Reply #2 on: August 02, 2026, 06:25:56 PM »

I use a bookbinders material.  In the uk it’s called mull. It’s an open weave calico with a stiffener.  It’s very similar to Hohner grill cloth from the 1930s, but also looks good on later models.  It’s quite cheap.

Thanks for the lead.  I'll check with our talented local bookbinder.  I just checked online and mull is a very open weave gauzy material.  It looks like it would be absolutely spot-on for the bass side, but I'm hoping for a little tighter weave (for sound as well as retaining original appearance) and a metallic finish would definitely be a plus.   
« Last Edit: August 02, 2026, 06:34:49 PM by MikeSchway »
Logged
--Mike Schway
Bellingham, WA US

Personal arsenal:  Marc Savoy Acadian (C,D, wet D), Corona II (60s GCF, newer GCF and FBE), Far, FAR too-many pokerworks (GC, AD, DG), Erica GC, Castagnari Dinn3 C#D, Merlin DG, Lisheen C#D

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: source for erica grill cloth? (US)
« Reply #3 on: August 02, 2026, 11:09:39 PM »

Metallic speaker grille cloth? Maybe try eBay first.
Logged
Vintage Double Ray C#/D

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: source for erica grill cloth? (US)
« Reply #4 on: August 02, 2026, 11:34:21 PM »

I recently did up an old Hohner "Presswood" melodeon where the grill appeared to have had paint spilt on it  (Theo, I bought it off yourself on Ebay, the one that had a couple of shield shaped stickers glued on it). I used embroidery backing cloth - available in a range of holes per inch. Very cheap & looks great, with no noticeable muffling of the sound.
I used Standard "Yellow tube" UHU to attach it. Don't know if it is called that, or available at all in the US.
Logged

MikeSchway

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: source for erica grill cloth? (US)
« Reply #5 on: August 07, 2026, 01:26:53 AM »

Thanks, all, for the suggestions.

The bookbinder's "mull" is a nearly identical replacement for pokerwork bass side grill as well as some very early 2914 treble grills.  It would probably work in the Erica as well, but it doesn't have the original look and probably a little TOO sound-transparent. 

Some folks suggested speaker grill cloth, and that was my first idea, but after spending the past 30 years doing warranty service and restoration of Fender amps, common amp grillcloth is about the LAST thing I want to see in this point of my early retirement. Pouring through suppliers's websites gave me a couple dozen grillcloths and all of them reminded me too much of a guitar amp.  Too much of a PTSD trigger.

Until the very last entry.  It might not be an exact replacement, but it's close enough that there might not be too much of a cringe factor.   I ordered a yard and in a week or so I'll know if I did OK.  https://www.amplifiedparts.com/products/grill-cloth-white-warp-weave-34-wide

Again, thanks. The order minimum, a full square yard, is enough for 18 Ericas, so if you're in the CONUS, I'll be glad to share some of the excess.

Cheers--
Logged
--Mike Schway
Bellingham, WA US

Personal arsenal:  Marc Savoy Acadian (C,D, wet D), Corona II (60s GCF, newer GCF and FBE), Far, FAR too-many pokerworks (GC, AD, DG), Erica GC, Castagnari Dinn3 C#D, Merlin DG, Lisheen C#D

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: source for erica grill cloth? (US)
« Reply #6 on: August 07, 2026, 02:53:26 PM »

Fingers crossed.

If it looks a bit too new, brewed tea might your friend. (My uncle did a similarly long apprenticeship in a theatrical props workshop.)

It's a good staining agent for fabrics that won't subsequently need to be washed, making them look anything from disgustingly dirty to half a percentage point less bright. Try soaking small scraps in different concentrations then letting them dry.
Logged
Vintage Double Ray C#/D

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: source for erica grill cloth? (US)
« Reply #7 on: August 07, 2026, 08:53:24 PM »

14 count aida cloth is my go-to.
You can get metallic colours sometimes.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: source for erica grill cloth? (US)
« Reply #8 on: August 07, 2026, 08:58:52 PM »

Fingers crossed.

If it looks a bit too new, brewed tea might your friend. (My uncle did a similarly long apprenticeship in a theatrical props workshop.)

It's a good staining agent for fabrics that won't subsequently need to be washed, making them look anything from disgustingly dirty to half a percentage point less bright. Try soaking small scraps in different concentrations then letting them dry.

I think some of the speaker grille materials are synthetic and may not absorb the stain.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: source for erica grill cloth? (US)
« Reply #9 on: August 08, 2026, 06:49:16 AM »

Bookbinder mull gets my vote. Very cheap, stiff and in at least two levels of open weave. Any bookbinder supplier carries it.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: source for erica grill cloth? (US)
« Reply #10 on: August 12, 2026, 01:05:24 PM »

Next time might take a look at Parts Express in Springboro OH (USA).
I bought some "samples" from them one time and they were large enough for Pokerworks.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

MikeSchway

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: source for erica grill cloth? (US)
« Reply #11 on: August 17, 2026, 07:17:53 PM »

Just to tie a bow around this thread:

I never did find the perfect material.  I ended up using 14-count Aida cloth.  Bookbinder's mull was too gauzy (but perfect for patching a hole on the bass side and certainly ideal for an older pokerwork).  I also sourced a white-on-white speaker grille cloth with a suitable pattern but it turned out to be too thick and made of stiff nylon or polypropylene (at least 2.5mm thick) and wouldn't allow the edges of the grille to sit flush on the box.  Aida cloth it was. 

I stained the cloth by steeping it for 15 minutes in a 1:1 dilution of strong coffee.  Tea was too red (I should have paid attention that the brand was "Red Rose"  ;) ). Besides, coffee has a more effective caffeine level.  It came out a nice rich ivory color matching very well to the 60-year-old original cloth.

Attaching was a little tricky and I'm still not 100% satisfied but it's good enough.  To guard against future rust I decided against any adhesive that had ever had water in its recipe.  This eliminates any flavor of PVA like Aileen's Tacky Glue or hide glue.  I couldn't source Uhu locally.  I ended up using E6000 around the perimeter, and, similar to the way Hohner did it, glued a few narrow 1/8" strips of cardboard into the interior concave ribs to act as a filler for supporting the cloth going around the curve. (unfortunately I didn't take any photos of this detail). Without these cardboard fillers, the cloth would undoubtedly sag away from the ribs in time.  I used a thick-ish cyanoacrylate gel glue for the ribs.  It looks great, but I was hoping the E6000 around the perimeter would have come out of the tube a little thinner so it would spread easily with a brush; instead it just formed thickish globs.  Perhaps Uhu goes on a little more evenly. 

Anyway, I'm happy and thanks to all for the suggestions. 

--Mike

« Last Edit: August 17, 2026, 08:28:33 PM by MikeSchway »
Logged
--Mike Schway
Bellingham, WA US

Personal arsenal:  Marc Savoy Acadian (C,D, wet D), Corona II (60s GCF, newer GCF and FBE), Far, FAR too-many pokerworks (GC, AD, DG), Erica GC, Castagnari Dinn3 C#D, Merlin DG, Lisheen C#D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: source for erica grill cloth? (US)
« Reply #12 on: August 17, 2026, 11:16:05 PM »

That looks smashing! And professional, too, well done.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal