Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air release button size Pokerwork  (Read 501 times)

0 Members and 1 Guest are viewing this topic.

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Air release button size Pokerwork
« on: August 05, 2026, 06:05:56 PM »

Hi. I am fixing up a Pokerwork, the "blond" pressed wood version. It is missing the air release button. The rest of the mechanism works perfectly. There are replacement buttons at Liberty Bellows but I don't know the size because I don't have the old one. Anyone know what size I should order?
Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Air release button size Pokerwork
« Reply #1 on: August 05, 2026, 06:39:39 PM »

I think most Hohner air buttons are quite standard, maybe 7.5 mm dia by 15mm or so. But if you're thinking of buying from Liberty Bellows, I would suggest you contact them by email or phone and ask them. They will know about their own products better than any of us here.
Logged

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Air release button size Pokerwork
« Reply #2 on: August 05, 2026, 10:03:44 PM »

I called them prior to this post and they said they could tell me the size for $60 (Tech Evaluation). Suggested I buy several sizes as it would be cheaper as the buttons are inexpensive.  There are many sizes listed so I am not sure which ones to order. I will start with ones in the range you have suggested and hope for the best. Thanks.
Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Air release button size Pokerwork
« Reply #3 on: August 05, 2026, 11:04:27 PM »

Hmm... See this eBay item from Loffet in France with dimensions and information. In French, but save $60.  (:)

https://www.ebay.com/itm/300780812797
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Air release button size Pokerwork
« Reply #4 on: August 06, 2026, 12:57:54 AM »

I replace them with black stradella bass buttons as used on piano accordions.
The hole needs to be enlarged a bit to accommodate the Hohner lever.
The buttons also need to be cut to length so can be set to your preferred protrusion.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Air release button size Pokerwork
« Reply #5 on: August 06, 2026, 03:27:25 PM »

I have a 1950s Presswood (going by the bass end feet arrangement) and I have just measured the air knob part at 7.33mm diameter, 10mm length.

However, there seems to be a fair amount of clearance in the slot, so I doubt the exact size is critical.

That'll be $60 please, but I'll give you 100% discount for cash. (I sense some sort of paradox there).

Logged

TLANDRE

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Air release button size Pokerwork
« Reply #6 on: August 06, 2026, 04:52:12 PM »

Thanks. This is all very helpful. I am new to this forum and appreciate the good nature of it's members.
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Air release button size Pokerwork
« Reply #7 on: August 06, 2026, 06:43:16 PM »

I've owned a couple of Pressed Woods (still have one) and found their original air buttons a little short for me.
So I followed the route suggested by Rees and replaced them with PA bass buttons.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Clive Thorne

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Air release button size Pokerwork
« Reply #8 on: August 06, 2026, 07:27:55 PM »

Based on my Presswood the problem with extending the air button is that it would then stick out further than the original feet, so if you put it down on the feet the air button actually takes part of the load. Would still appear to be the same on my late 70s pokerwork. So if you do extend the button it might be an idea to put longer feet on as well, or remember never to put it down on its feet.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal