Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pallet 'clack'  (Read 417 times)

0 Members and 1 Guest are viewing this topic.

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Pallet 'clack'
« on: October 19, 2026, 09:37:41 AM »

I have bought a good quality box which hasn't been played for a long time. The accidentals and a couple of other 'dusty end' buttons 'clack' in the manner of pallets which have become hardened on their faces (I think, if my Hohner experience is transferable).
Is there a simple remedy not involving re-facing, such as a rub with a toothbrush or similar just to raise the 'pile' again?  I'm pretty sure that it is lack of use that is the cause, the pallet has remained compressed for too long.  It's a slight hope, I know, but rather than having to go the whole hog on a re-face for just a couple or so buttons.....
« Last Edit: October 19, 2026, 09:40:46 AM by rileycat »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pallet 'clack'
« Reply #1 on: October 19, 2026, 11:26:35 AM »

Yes you can brush the pallet face to raise the nap.  I’ve done this and it does improve things.
Before starting this check that there isn’t something else causing the noise.  Sometimes levers can hit the underside if the grill - play ing with the grill off will tell you if it’s this.
You can also get noise if the action has a double lever.  The link between the levers can be slack and will then rattle.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Pallet 'clack'
« Reply #2 on: October 19, 2026, 01:13:16 PM »

Although getting a brush between the pallet and fondo is nigh on impossible, unless the brush is very very small.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pallet 'clack'
« Reply #3 on: October 19, 2026, 01:20:51 PM »

I’ve usually done this when I have the keyboard stripped down.  Otherwise the pallets would have to detached from the levers.  I’d never considered trying to brush the pallet facings in situ.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Pallet 'clack'
« Reply #4 on: October 19, 2026, 02:19:41 PM »

Many thanks for both bits of advice.  I am able to strip down a keyboard, but maybe it won't be necessary - fingers crossed. Re-facing, tho', is definitely outside my skill set!
Logged

fc diato

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 146
Re: Pallet 'clack'
« Reply #5 on: October 19, 2026, 02:35:28 PM »

I've been able to do this (raise nap without dismantling) by using one of those small dental interstitial brushes.
Logged
fc diato

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Pallet 'clack'
« Reply #6 on: October 19, 2026, 05:05:38 PM »

I've been able to do this (raise nap without dismantling) by using one of those small dental interstitial brushes.

If you need a longer reach, it's possible to buy straw-cleaning brushes in diameters down to 2mm.

I use them for cleaning whistle heads (and if the bristles are slightly too wide it's easy to cut a smidgeon off with scissors). Thought I'd mention them because they're useful for fiddly jobs, but for a long time I'd no idea they existed.

This is one listing, there are probably others:

https://www.ebay.co.uk/itm/358285035863?
Logged
Vintage Double Ray C#/D

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Pallet 'clack'
« Reply #7 on: October 20, 2026, 09:51:58 AM »

Thanks all.  I might have to try both the above, as someone has rounded off the heads of 2 of the 4 screws used to attach the keyboard. That was a bit annoying, not insurmountable of course, but grrrr!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal