Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner HA114 port and polish?  (Read 988 times)

0 Members and 1 Guest are viewing this topic.

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Hohner HA114 port and polish?
« on: October 22, 2026, 08:27:53 PM »

Quote
Porting and polishing; an engine modification that reshapes and smooths the internal intake and exhaust ports of a cylinder head to improve airflow and increase horsepower...

Still regularly doing the Bailey-Stretch on my old HA114 bellows, but this box just does not seem to want to loosen up.

It was during one of these stretching exercises that I noticed that the hole, under the air-spoon, is 15mm in diameter, while the spoon itself is 30mm.  Obviously the hole cannot be the same diameter as the spoon, but enlarging the hole diameter box to say, 20mm, would increase the area from 176.715 sq.mm. to 314.16mm sq.; and increase of 137.445mm sq. - a 43.75% increase.

Since the "stiffeness" is felt most acutely on the pull, I am now wondering if this is more related to air restriction, than the bellows themselves. 

Enlarging the hole would not be difficult (but definitely a no-going-back option). I've only had the bass end off once and recall that the reeds on the 114 are not removable. Preventing wood chips from fouling the reeds would be the primary concern.

Experimentation carried to the extreme would require a pseudo bass end (simply a flat piece of thin plywood with a 20mm hole) taped to the end of the bellows to test if the increased surface area would allow the bellows to be extended with less effort.

Thoughts?

previous discussion: https://forum.melodeon.net/index.php?topic=14010.0
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA114 port and polish?
« Reply #1 on: October 22, 2026, 08:37:29 PM »

You should be able to work out from playing whether the stiffness is in the bellows, or in the air hole. I think it’s unlikely to be the size of the air hole.  Some 114s have bellows with as few as 14 folds, these will certainly reduce movement compared to the more normal size bellows which typically have 18 folds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Hohner HA114 port and polish?
« Reply #2 on: October 22, 2026, 09:27:38 PM »

The one-row 114 has 15 plaits/gussets

Both of my 2-row Pokerworks have 17 plaits/gussets; the effort required to draw either one of them is much less than that of the 114.

The bellows dimensions on all three are 15cm x 27cm +/-
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA114 port and polish?
« Reply #3 on: October 22, 2026, 09:52:14 PM »

That suggests that it’s the bellows that’s holding you back rather than the air valve.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Hohner HA114 port and polish?
« Reply #4 on: October 22, 2026, 09:59:44 PM »

I recall mentioning this in your previous thread on this topic, but I really suspect that your experience of the HA114 feeling stiff (particularly as you are comparing them to different, 2-voice instruments) might be down to other factors and not the bellows themselves.  Widening the air hole under the spoons will not address these factors and will likely not yield the results you are looking for. 

The response of the reeds (based on quality, set-up, and reedblock design) is one of the biggest factors that can contribute to a box feeling 'stiff' or like it requires work to play.  A HA114 plays each note in 3 different octaves, 4 sets of reeds in total, including a low octave which can often feel quite sluggish with Hohner reeds.  Your 2-voice Hohners, in comparison, have only two middle-octave reeds sounding.  A 2-voice Hohner will take noticeably less effort to play than a 4-voice Hohner.  The button tension is also significantly higher on a HA114 than a 2-voice Hohner, resulting in a stiffer keyboard. 

I'm wondering if you have any experience playing other HA114 boxes to compare with?  You cannot compare your HA114 to a 2-voice Hohner...
« Last Edit: October 22, 2026, 10:02:22 PM by mselic »
Logged
C#/D player

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Hohner HA114 port and polish?
« Reply #5 on: October 22, 2026, 11:33:55 PM »

a well set up 114 can feel very easy to play...lighter springs / valves seating well / reeds set nicely/ all potential leaks sealed (seals on spoons / pallet felts and leathers / bellows seals/ bellows corners tight)....but when all is said and done you are driving four reeds instead of two and a D or C will be easier to play than an A or G and older H reeds often speak easier than newer T reeds (albeit often with less volume).....also condition of wax and valves is important and age of bellows and number of bellows folds....theres a lot going on and even with factory made instruments sometimes you strike gold and sometimes you pushing a wheelbarrow up a hill with a flat tyre. i know that doesnt help but with a factory made 114 you sometimes have to do all the things you can and you can end up with a diamond!
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner HA114 port and polish?
« Reply #6 on: October 23, 2026, 12:02:53 AM »

One thing that hasn't been mentioned, but I once had this problem which turned out to be the valves were glued too far along their lengths, and consequently weren't opening enough. Just a thought!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Hohner HA114 port and polish?
« Reply #7 on: October 23, 2026, 07:45:01 PM »

Quote
I'm wondering if you have any experience playing other HA114 boxes to compare with?

Regretfully, I have not. Melodeons are a sparse commodity here in central Califorinia (aside from Norteño and Conjunto Mexican bands (and they don't play 1-rows)).

Keyed in "C", I bought this box in new, in 1994, and has always felt "stiff". The keyboard action isn't the issue; it is smooth enough. Still very airtight. No valve wheezing, etc.

"Stiff" might not be the appropriate word; the issue I have is the effort needed to draw the bellows open. Resistance.  I always assumed it would loosen up, but it hasn't.

Brother Trip Foot, is a favorite tune of mine, and epecially suited to 1-rows ( I feel ), but three time through on my 114C is about all I can handle.

Here played by anahata. Allowing for his years of experience and specific muscle development, it appears that his instrument has an easier action than mine.

https://youtu.be/bLoW3R9ZUU4?si=ckm90e6VJ_qi42zf

Here's another example. No way my bellows are this limber
https://youtube.com/shorts/vRHEl2S7pOo?si=mKIbUo9r7c1e_ZMe

As mentioned in the referred discussion, this just may be the way it is. I'm now curious how the draw on a 1-row "Cajun" box feels by comparison. (none of those within 1,200 miles of me either).




« Last Edit: October 23, 2026, 07:48:41 PM by Lew Morris »
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Fionn

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 194
Re: Hohner HA114 port and polish?
« Reply #8 on: October 23, 2026, 09:06:54 PM »

Is it easier when you move the bellows while pressing the air spoon alone? If it's stiff when you're not even sounding reeds, presumably it could only be airflow or bellows.

If it's only stiff when you're playing it has to be something else. Are all parts of the scale equally resistant?
Logged
Vintage Double Ray C#/D

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Hohner HA114 port and polish?
« Reply #9 on: October 24, 2026, 10:57:41 AM »

If it's harder work pulling the bellows out than pushing them in, that's got to be the bellows itself that's causing the problem. I don't see how any kind of air flow restriction could have that effect.

What happens if you hold the box up by the bass end with bellows initially closed and push in the air lever? Mine extends under the weight of the RH end of the box till the bellows are a little over 1ft long. A stiff bellows might only drop a few inches and if you pull it down further and let go (all with the air valve still open) the bellows will pull itself closed again. If yours does that, you definitely need to do more Bailey stretches, or possibly try to find a way temporarily to store the box with the bellows held extended.

My Oakwood bellows was incredibly stiff when I first had it, and it still gently resists being pulled out a long way.

Incidentally, I tried Brother Trip Foot on both the 1-row and a D/G box, and I was surprised at how well it works on a single row. It's not too hard to play as it's fairly well balanced between push and pull notes.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

MikeSchway

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Hohner HA114 port and polish?
« Reply #10 on: October 24, 2026, 06:07:12 PM »

I recall mentioning this in your previous thread on this topic, but I really suspect that your experience of the HA114 feeling stiff (particularly as you are comparing them to different, 2-voice instruments) might be down to other factors and not the bellows themselves.  Widening the air hole under the spoons will not address these factors and will likely not yield the results you are looking for. 

The response of the reeds (based on quality, set-up, and reedblock design) is one of the biggest factors that can contribute to a box feeling 'stiff' or like it requires work to play.  A HA114 plays each note in 3 different octaves, 4 sets of reeds in total, including a low octave which can often feel quite sluggish with Hohner reeds.  Your 2-voice Hohners, in comparison, have only two middle-octave reeds sounding.  A 2-voice Hohner will take noticeably less effort to play than a 4-voice Hohner.  The button tension is also significantly higher on a HA114 than a 2-voice Hohner, resulting in a stiffer keyboard. 

I'm wondering if you have any experience playing other HA114 boxes to compare with?  You cannot compare your HA114 to a 2-voice Hohner...

I'm in full agreement with mselic here.  There are many causes for the lack of response and the feeling you need more air on the pull, and like mselic said, the size of the air hole is pretty far down the list. The solution isn't to try to move the bellows MORE...it's to attempt to play with LESS bellows, especially since you're already handicapped by losing a couple of pleats compared to a 2915-type.  Those baritone voices require a lot of air and unless they're gapped efficiently you're going to subconsciously yank on it harder just to get it to speak clearly. Suffice it to say, on a 114, the deck is already stacked against you.

Sure, out of the box, the bellows on a 114 a "special" kind of beast. New, they feel like they're glued together and it takes months of serious playing to break them in. But even though taking extreme measures in loosening up the bellows might seem to help, it's not a cure...just a work-around.  I've had many conversations with Marc Savoy on this issue, and according to Marc, the return springiness is paramount in the speed you can reach with the instrument (p'haps more importantly than how easy they are to open).  Watch closely at Marc's playing and you can't hardly tell he's moving the bellows at all. Sure, it'll take extra force to open compared to one which is flaccid, but springier bellows will reduce the lag in changing directions ultimately making for a quicker instrument. Unfortunately it takes a well-gapped set of reeds to take full advantage of springier bellows and Hohner famously doesn't take much care in the final adjustment of these "bargain-bin" instruments. 

It takes a lot of practice to shorten your bellows. Shorter and more staccato bass/chords help a lot, as does your choice of how to massage the melody in order to achieve balanced bellows.  Accept the reality you won't be able to play every note that the fiddle does. ;).   

Not that this applies to the subject at hand, but in the Cajun box world, players often take advantage of the fact with a 4-voice box, you are playing three octaves at once, and if the fingering gets tough, often they would just shift octaves for a note or two in order to simplify things  If you try this with just the middle reeds engaged, it tends to sound like a random series of beeps, but once you engage the L and H banks, a tough passage will transform into something sounding absolutely linear. Like magic.  (I'm talkin' to you, Perrodin Two-step!  >:E)

Cheers--
--Mike
Logged
--Mike Schway
Bellingham, WA US

Personal arsenal:  Marc Savoy Acadian (C,D, wet D), Corona II (60s GCF, newer GCF and FBE), Far, FAR too-many pokerworks (GC, AD, DG), Erica GC, Castagnari Dinn3 C#D, Merlin DG, Lisheen C#D

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Hohner HA114 port and polish?
« Reply #11 on: October 25, 2026, 11:51:59 AM »

in the Cajun box world, players often take advantage of the fact with a 4-voice box, you are playing three octaves at once, and if the fingering gets tough, often they would just shift octaves for a note or two in order to simplify things 

Not only in the Cajun box world.  ;)
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: Hohner HA114 port and polish?
« Reply #12 on: October 26, 2026, 10:18:51 PM »

First, I absolute realize that the Hohner 114 is "bargain bin", but I have had nothing to compare to mine; Hohner, or otherwise.

Quote
The solution isn't to try to move the bellows MORE...it's to attempt to play with LESS bellows,

This is pretty much how I have found it necessary to play it.

Quote
What happens if you hold the box up by the bass end with bellows initially closed and push in the air lever?

Mine extends under the weight of the RH end of the box till the bellows are a little over 1ft long.

Bob's your uncle.  Surprisingly, mine does as well, but it takes about 8 seconds to do so.

Using this video, from 0:53 on, I would find it difficult to play with the bellows extended this far, for this long.

Is this typically the 'range' of extension 1-rows are played? 

https://youtu.be/42pyGCR5FqQ?si=1jTUDhPabp7EihJr&t=53

What I'd give to be able to pass this thing around the room for your input.

Logged
"It's what you learn, after you know it all, that counts." John Wooden

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner HA114 port and polish?
« Reply #13 on: October 27, 2026, 10:54:33 AM »

Yes, that's the typical range of extension.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal