I've done a lot of key conversions on old Hohners, so I'm speaking from experience. If you want to retain the sound of Hohner reeds, especially the old zinc plate pre WW2 ones than it may be worth retuning the old reeds, otherwise go with new reeds. You can buy reedblocks fitted with reeds from Hohner.
It takes quite a time to do such a conversion, and a few replacement reeds are often needed at the top or bottom end of the range. My usual method is to move the reeds around to positions where they need the least amount of tuning. I have successfully tuned old C/C# reeds up a semitone to C#/D by shifting all the reeds up by an equal amount, they could also be tuned down to B/C by weighting the reed tips. Either method can give satisfactory results if done with care, but it can go wrong. Because of the work involved it costs about the same to fit new reeds or retune the old ones, but if you are planning to do it yourself then you maybe don't have to count your own time. If its your first experience of reed work you may find that you have to do two or three boxes before you get a really satisfactory result.