Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Foam Melodeon  (Read 16352 times)

0 Members and 1 Guest are viewing this topic.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Foam Melodeon
« on: February 25, 2008, 09:25:25 AM »

G'day Mates

In regards to the balsa wood reed blocks that has turned up in discussion on this news group, I have been using it for many years with fantastic results. I know this at first might sound a little silly but it is stable and does not interrupt or absorb the resonation set up in the cavity. At this point you need a timber that does not respond to frequencies as you want as much as you possible can to pass out off the accordion without any disruption by vibrating parts. My research has found in the last few years is that the timber of the accordion instrument needs to be inert, completely different to the guitar or violin type instruments, what we have in the accordion is closer to a speaker box. I have had a fantastic sounding piano accordion into my workshop for repairs that had Masonite (hardboard) sound boards, or should I say "dead boards."

If you are searching for good Balsa wood then look in the yellow pages under Balsa Wood, as it is used by architects and theater set makers (and surf board makers here in Aus')  and the darker harder stuff is cheaper as the trades want white balsa. You will find it far cheaper than the craft shop.

In my last batch of acoustic boxes I put it all to the test, and made a box that was made from 90% foam, and another flutina that had foam reed pans. Then testing with a frequency analyzer we found that we got a 33% increase in the lower partials and then it reduced to about 10-15% increase across the board in all the odd numbers with no increase in the evens. When I first played the 90 % foam box I thought I’d lost my top end as is sounded so very low.
And by the way it is very loud!

My mate who analyzes my instruments who is himself a top shelf instrument maker suggested it might be better to make accordions and concertinas from MDF! I do not have time to test that one, but it might be worth testing by someone.

Another plus about the foam that I’m using is that it has a memory, I have covered every surface with timber veneers, and I have been a little brutal with it to test out its survival probabilities, I have found that where a dent has been knocked into the instrument within a few days there will be no sign at all, as the foam pushes it back out again. This is not a cheap way of making an instrument as each surface has to be veneered, it is far cheaper time wise to use solid timber, but if someone needs a light instrument due to physical problems then this is the answer.


Although I made these box’s about 6 months ago this is the first time I have posted anywhere that I have done this, although my friend/customer base know about it, and a few have tested it. I will have it at the National Folk Festival and Port Fairy Folk Festivals here in Aus’ over the next month or so. 

Back to work, and Good Health Too You All.
Stormy
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Foam Melodeon
« Reply #1 on: February 25, 2008, 12:22:13 PM »













(Speechless)
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Foam Melodeon
« Reply #2 on: February 25, 2008, 12:36:27 PM »

No, actually I just wonder how incredibly different that must sound!  The choice of construction materials to affect tone is always interesting.  I have an old Castagnari Nik which can be piercing if played hard (something I'm often accused of).  The Dino Baffetti Black Pearl likewise and I believe both of these have aluminium "soundboards".  My Trilly has an incredibly thin tone when using just the dry tuned treble pair and an amazingly sound with the bass octave in - attack like a chisel in your ears - like a Cajun box.

The Hohner Pokerwork, on the other hand, with its long reeds has a much rounder tone (wooden board?) and even more so with the four-stop, tends to echo through the whole box. 

I'm guessing that with the resonance taken away, a foam box must be much more harmonica-like in tone?  What with that, the weight reduction (more muscle available to overblow it) and the self healing aspects you should be onto a winner.  Like a speaker cabinet...  I guess so (an alpine box is a bass reflex?), have you tried filling it with acoustic wool?
Could you put a soundbite on a website, please?
Logged

risto

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 317
Re: Foam Melodeon
« Reply #3 on: February 25, 2008, 10:36:46 PM »

Stormy's explanation makes sense also from another point of view:

An accordion reed produces a clear tone alone all by itself while a guitar string makes almost no noice if there is no soundboard resonating. (The reason for the difference being what?) Anyway, a resonating soundboard in an accordion should be very well "tuned" to give *nice* additional harmonics to the total harmonics and this would be a very difficult task for anyone. A none-resonating accordion costruction could leave the reeds sounding with their natural sound.

....or was that total rubbish?
Logged
Paolo Soprani 5-row, Roland FR1B-digital CBA button accordion. Guitar, 5-string OT banjo, mandolin, piano...
My one man band recording: https://apari.fi/Bonaparte_Crossing_The_Rhine_Risto.mp3

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Foam Melodeon
« Reply #4 on: February 26, 2008, 10:42:13 AM »

No, actually I just wonder how incredibly different that must sound!  The choice of construction materials to affect tone is always interesting.  I have an old Castagnari Nik which can be piercing if played hard (something I'm often accused of).  The Dino Baffetti Black Pearl likewise and I believe both of these have aluminium "soundboards".  My Trilly has an incredibly thin tone when using just the dry tuned treble pair and an amazingly sound with the bass octave in - attack like a chisel in your ears - like a Cajun box.

I have never used aluminum as sound boards, I have used mostly timber 3 ply that I make up using tonal timber as the filling in the sandwich, this could be a waste as it could be better used by the guitar makers.
Of course there is so many other things going on that I still have trouble making sense of it all, as one customer said he plays the accordion through his chest, but again that is an older box that has plenty of spruce in it, even as far as having spruce sandwiched between sheoak for the frames.

The Hohner Pokerwork, on the other hand, with its long reeds has a much rounder tone (wooden board?) and even more so with the four-stop, tends to echo through the whole box. 

I'm guessing that with the resonance taken away, a foam box must be much more harmonica-like in tone?


I have not thought of it that way but you are probably right, one of the noticable aspects of this the box it is very fast.

  What with that, the weight reduction (more muscle available to overblow it) and the self healing aspects you should be onto a winner.  Like a speaker cabinet...  I guess so (an alpine box is a bass reflex?), have you tried filling it with acoustic wool?

I have not tried the wool, but i will try it as soon as I can get some.

Could you put a soundbite on a website, please?

I will get a recording organised and I will post it up on youtube
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Alison Scott

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 407
  • Oakwood, Dino Baffetti, Roma, Liliput, Streb etc.
    • Macadamia
Re: Foam Melodeon
« Reply #5 on: February 26, 2008, 11:21:55 AM »

G'day Mates

[loads of very interesting stuff snipped]

My mate who analyzes my instruments who is himself a top shelf instrument maker suggested it might be better to make accordions and concertinas from MDF! I do not have time to test that one, but it might be worth testing by someone.


Except of course that MDF is incredibly heavy, which probably argues against its use as an instrument frame. Maybe a foamcore/MDF ply?

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Foam Melodeon
« Reply #6 on: February 26, 2008, 11:22:56 AM »

Stormy's explanation makes sense also from another point of view:

An accordion reed produces a clear tone alone all by itself while a guitar string makes almost no noice if there is no soundboard resonating. (The reason for the difference being what?) Anyway, a resonating soundboard in an accordion should be very well "tuned" to give *nice* additional harmonics to the total harmonics and this would be a very difficult task for anyone. A none-resonating accordion costruction could leave the reeds sounding with their natural sound.

....or was that total rubbish?
I would say you were right on track.
When I started restoring concertinas 32 years ago one of the very first things that had me very confused (and it took me nearly 30 years to buck the theories of tonal timbers) was that there is the sound board with about 15 spring loaded felt dampers pushing down on it and then a reed pan compressed down to the other side, it is impossible that it can be a sound board, try doing that to a guitar and it is obvious what would happen.

Our reed is our oscillator, and the air cavity within the reed block or pan is the resonator we can only amplify that sound or deaden it we cannot build on it. What I have learnt is that if anything moves in response to the reed or resonator we can then loose some of the sound, or get something a lot worse a "wolf".
Of course at the end of the day nothing is set in cement, there are so many combination of things that can cause changes, I'm a total none traditionalist, I will look at anything to improve my instruments, and I'm always willing to say that the theory (and i have had plenty over the years) I had last week was wrong.

But at this point of time "dead is best"
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Foam Melodeon
« Reply #7 on: February 26, 2008, 11:40:32 AM »

G'day Mates

[loads of very interesting stuff snipped]

My mate who analyzes my instruments who is himself a top shelf instrument maker suggested it might be better to make accordions and concertinas from MDF! I do not have time to test that one, but it might be worth testing by someone.


Except of course that MDF is incredibly heavy, which probably argues against its use as an instrument frame. Maybe a foamcore/MDF ply?
You are right of course, its just that the day we first got the stunning results my mate (who is a pipe and flute maker) went into shock, as he had to reverse a lot of theories that he had about my work, he threw that one in to have a dig about the real wood I have collected over the years, I think he expected a fire sale!
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Foam Melodeon
« Reply #8 on: February 26, 2008, 12:32:55 PM »

According to some studies the best material for speaker enclosures is concrete!!! 

But back to your experiments, what we need then is an inert reflector that does not resonate of vibrate?
« Last Edit: February 27, 2008, 11:50:28 PM by québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Pushpull

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 185
Re: Foam Melodeon
« Reply #9 on: February 28, 2008, 02:04:26 PM »

According to some studies the best material for speaker enclosures is concrete!!! 

But back to your experiments, what we need then is an inert reflector that does not resonate of vibrate?

A number of very fine speakers have been prodiced (and continue to be) with metal cabinets. The trick is to shape them so as to reduce standing waves and make sure they are adequately damped to get the resonant frequency of the cabinet nice and low. Having said that I do recall back in the 70s a house being advertised in Gramophone magazine. Strange to advertise a house in that mag? Well this one had reinforced concrete bass bins built into the basement.

So with respect to melodeons, I reckon it should be possible to make one out of say bitumen lined titanium (!!). If I remember correctly the Castagnari Casta had a metal soundboard.

Actually as an aside, I reckon what gives the Pokerwork its unique sound is it's lightweight "orange-box" construction. More heavily built (more expensive?) boxes never seem to have the same punch. It's rather like comparing a sturdily built "school" violin with a proper, much lighter, craftsman made instrument.

Roy.
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Foam Melodeon
« Reply #10 on: February 28, 2008, 02:17:44 PM »

So, a non-resonating, porous and lightweight wood cabinet could then be made of balsa!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Foam Melodeon
« Reply #11 on: February 28, 2008, 02:34:16 PM »

All this reminds me of the claim by physicists that the material of which flutes are made is (hehe) immaterial - that only the bore dimensions matter, and a flute made of concrete (or plastic) will sound exactly the same as one of the same dimensions made of wood.

Musicians and instrument makers, however, know different.

Metal soundboards, btw, are used on many good-quality Italian accordions. Fans of the old Paolo Soprani boxes insist that the older ones with wooden soundboards have a warmer tone that the later ones with aluminum soundboards.
« Last Edit: February 28, 2008, 02:36:32 PM by SteveJones »
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Foam Melodeon
« Reply #12 on: February 28, 2008, 03:49:14 PM »

My bit of school boy physics, please feel free to shoot me down as I am just trying promote this discussion.
It may be that a loudspeaker enclosure is not the best way to think about what is going on as they are largely concerned with isolating one side of the speaker unit from the other as it is a thin diaphragm  oscillating , a google on loudspeaker design will get you much more than I can explain. The woodwind family etc. is mainly about resonance in pipes.
With free reed instruments what we have is a flow of air that is being chopped by the reed to produce a sound wave. 

So it would seem that you want a ridged reed frame attached securely attached to a ridged non sound absorbing reed block and a sound path to the outside world that is as free as possible from sound absorbing materials and resonating structures.

Stands back and ducks
Logged
aka malodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Foam Melodeon
« Reply #13 on: February 28, 2008, 05:00:38 PM »

If I remember correctly the Castagnari Casta had a metal soundboard.

No, on the contrary one of its claims to fame was that it has a 'tonewood' soundboard.  The ones I've seen were cedar, I believe they also used spruce.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Foam Melodeon
« Reply #14 on: February 28, 2008, 06:10:54 PM »

No one has mentioned the fact that the only direct passage for the soundwave to reach the outside world is the tiny hole that opens to let the air actuate the reed! And it's partly blocked by the flapper!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Pushpull

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 185
Re: Foam Melodeon
« Reply #15 on: February 28, 2008, 06:12:49 PM »

My bit of school boy physics, please feel free to shoot me down as I am just trying promote this discussion.
It may be that a loudspeaker enclosure is not the best way to think about what is going on as they are largely concerned with isolating one side of the speaker unit from the other as it is a thin diaphragm  oscillating , a google on loudspeaker design will get you much more than I can explain. The woodwind family etc. is mainly about resonance in pipes.
With free reed instruments what we have is a flow of air that is being chopped by the reed to produce a sound wave. 

So it would seem that you want a ridged reed frame attached securely attached to a ridged non sound absorbing reed block and a sound path to the outside world that is as free as possible from sound absorbing materials and resonating structures.

Stands back and ducks

My bit of school boy physics, please feel free to shoot me down as I am just trying promote this discussion.
It may be that a loudspeaker enclosure is not the best way to think about what is going on as they are largely concerned with isolating one side of the speaker unit from the other as it is a thin diaphragm  oscillating , a google on loudspeaker design will get you much more than I can explain. The woodwind family etc. is mainly about resonance in pipes.
With free reed instruments what we have is a flow of air that is being chopped by the reed to produce a sound wave. 

So it would seem that you want a ridged reed frame attached securely attached to a ridged non sound absorbing reed block and a sound path to the outside world that is as free as possible from sound absorbing materials and resonating structures.

Stands back and ducks

No you're absolutely right, speaker cabs and instruments are not the same beasts at all. I guess melodeons should have some resonance - as I said I'm sure the construction of the body has a great influence on the quality of sound. Then of course, free reeds, strings and woodwinds all have different requirements with respect to how the wood (or other) behaves.

Re. materials, a large number of woodwinds (even high quality ones) are made of plastics, resins or wood dust/resin mixes. Blind testing has demonstrated that it is impossible for even an experienced player to accurately and repeatedly say what material an instrument is made of. It's the quality of construction which counts.

A couple of examples: Hans Coolsma makes machined polyester recorders (machined in exactly the same way as a wooden recorder). They are very expensive and very good.
The great classical guitar maker (well THE great classical guitar maker), Torres, made a guitar with papier-mache back and sides to should how relatively unimportant these were. I haven't heard it but I believe it was pretty good (well it would be).

Roy.
Logged

Pushpull

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 185
Re: Foam Melodeon
« Reply #16 on: February 28, 2008, 06:13:52 PM »

Sorry about the echo. You can see how important attention to detail is.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Foam Melodeon
« Reply #17 on: February 28, 2008, 06:17:55 PM »

I've been fascinated by the idea of a foam melodeon I so duly bought a can of expanding foam and sprayed the whole lot in through the air hole of my Castagnari.

I'm really not convinced that this is the way forward as I now can't get the melodeon in it's case!!!  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Pushpull

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 185
Re: Foam Melodeon
« Reply #18 on: February 28, 2008, 06:19:29 PM »

No one has mentioned the fact that the only direct passage for the soundwave to reach the outside world is the tiny hole that opens to let the air actuate the reed! And it's partly blocked by the flapper!
Logged

Pushpull

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 185
Re: Foam Melodeon
« Reply #19 on: February 28, 2008, 06:21:52 PM »

No one has mentioned the fact that the only direct passage for the soundwave to reach the outside world is the tiny hole that opens to let the air actuate the reed! And it's partly blocked by the flapper!

I really must be more careful
I really must be more careful
I really must be more careful
I really must be more careful
I really must be more careful

What I was going to say is, that suggests a violin only produces sound through the toneholes. I would think the body of a melodeon is equally important. Hence the different sounds produced by different boxes with pretty much the same lumps of metal vibrating in them.

Roy.
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal