Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Foam Melodeon  (Read 16323 times)

0 Members and 1 Guest are viewing this topic.

Pushpull

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 185
Re: Foam Melodeon
« Reply #20 on: February 28, 2008, 06:31:49 PM »

If I remember correctly the Castagnari Casta had a metal soundboard.

No, on the contrary one of its claims to fame was that it has a 'tonewood' soundboard.  The ones I've seen were cedar, I believe they also used spruce.

Ah well. It's not often I'm right but............
Logged

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Foam Melodeon
« Reply #21 on: February 28, 2008, 07:09:12 PM »

What I was going to say is, that suggests a violin only produces sound through the toneholes. I would think the body of a melodeon is equally important. Hence the different sounds produced by different boxes with pretty much the same lumps of metal vibrating in them.
Roy.
Easily verified: compare the sound of a harmonica played by different players: the mouth cavity and hands act as a resonator and greatly effects the volume and tone.

 
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Foam Melodeon
« Reply #22 on: February 29, 2008, 01:27:18 PM »

Have a look at this it is for concertinas but gives a very comprehensive introduction to what is going on.
Logged
aka malodeon

Larry Anthony

  • Good talker
  • **
  • Offline Offline
  • Posts: 68
Re: Foam Melodeon
« Reply #23 on: February 29, 2008, 02:45:28 PM »

What I was going to say is, that suggests a violin only produces sound through the toneholes. I would think the body of a melodeon is equally important. Hence the different sounds produced by different boxes with pretty much the same lumps of metal vibrating in them.
Roy.
Easily verified: compare the sound of a harmonica played by different players: the mouth cavity and hands act as a resonator and greatly effects the volume and tone.

 


...and pitch.

Logged

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Foam Melodeon
« Reply #24 on: March 02, 2008, 10:57:40 AM »

What I was going to say is, that suggests a violin only produces sound through the toneholes. I would think the body of a melodeon is equally important. Hence the different sounds produced by different boxes with pretty much the same lumps of metal vibrating in them.
Roy.
Easily verified: compare the sound of a harmonica played by different players: the mouth cavity and hands act as a resonator and greatly effects the volume and tone.

 


...and pitch.


G'day this is going well!
I'm sorry that I'm not spending as much time as I should answering the questions here, as it is my festival time and I'm very busy, but I will see what I can do here now.

You are right about the harmonica, it is air within that is the resonator not your hands or mouth they only control the air! The air within the inside of the melodeon (outside of the reed block) is not a resonator, otherwise there would be a pitch change as you played the instrument.

Over the years I have built about 300 custom made (every aspect is custom designed) melodeons, and no 2 are the same they may be similar, but the timbers (real wood not ply) will vary from customer to customer. I have used everything from jarrah (used for making railway sleepers and street paver's in the UK) to spruce, and I have noticed that I get bigger variations from other factors other than the timber used if timbers are the same size. I think we need to look a little closer at some other important factors. The biggest one (outside reeds) is the pallet design, this is by far where I have noticed the biggest variations. What are they made from, how much felt is on them, how thick, what quality is the leather, are they rubber mounted or glued on with glue or wax, and how much lift? The leather on the face of a pallet can make a very big difference, ask any flute maker who uses vellum on their valves for that very reason.

I might be wrong in comparing the melodeon with speaker boxes, to be truthful I know nothing at all about them, but I did have a folk mate and fiddle player, who used to lecture on the subject of acoustics, and it was him who suggested they were the closer comparison, but then he did have a glass of Coopers Ale to his lips at the time.

Again; I'm no expert on the fiddle, but are the back and the front the resonators, and they have a sound post between them to keep them in phase? From this; it would suggest to me that if the timber in the melodeon was to resonate to much we would quite likely end up needing sound posts to keep all the parts in phase, I have never heard of one that was out of phase and would not play have you? A lot of research has gone into making stringed instruments as far as front and back is concerned, I have not seen the same type of research go into the accordion. Where are the "node  lines" (I think that is what they are called) in the accordion?  I would love to know.

Thanks to you all, it is a great discussion.
Stormy

Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

mber

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: Foam Melodeon
« Reply #25 on: March 20, 2008, 10:06:54 PM »

I just bought MDF board here in States to make concertina handles.
It has a lable that reads:
"MDF contains a chemical, known to the State of California to  cause Cancer.
Use caution."

So be warned.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Foam Melodeon
« Reply #26 on: March 24, 2008, 01:08:32 PM »

We had a big debate on the subject of melodeon soundboards on the squeezeboxes Usenet newsgroup a couple of years ago.

One conclusion was that -- like many other sound-related subjects -- lots of people have strong opinions which they can't back up in practice (the "expensive speaker leads sound better" syndrome). Just because a good-sounding instrument has a metal soundboard doesn't mean that the good sound is *because* of the metal soundboard.

Any comparison with guitar/violin soundboards is completely spurious. In these instruments the sound generator is a string which couples through to the air via the soundboard, and the properties of this do have a huge effect on the sound.

In a melodeon the sound is produced by the reed chopping up an airstream, and this sound then makes its way to the outside through the air, so anything that affects this will change the sound. The reed and reed plate (and the way they're mounted) affect the production of the sound in the first place, then this makes its way through the holes in the soundboard, past the pallets and out of the grille -- all of these change the frequency response and form resonant chambers, but the shape and size of these is what matters not the material (unless it's soft or flexible material like felt that can damp out high frequency sound)

The soundboard is fairly rigid to start off with, and is then clamped against several rigid reed blocks, so it's extremely unlikely that the material would affect the sound because it can't move to any significant extent, but the thickness and shape/sharpness of the air holes will make a differerence. If a metal soundboard is thinner and has bigger holes than a wooden one people may conclude (probably wrongly) that the metal gives a brighter sound -- but then my Oakwood has a thin laminate soundboard with big holes and that sounds bright as well.

The only way to prove this for sure would be to make two identical boxes with metal and wooden soundboards, both with the same thickness and size/shape of air holes. I'd bet good money that nobody could tell which was which...

Cheers

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Foam Melodeon
« Reply #27 on: March 24, 2008, 04:20:42 PM »

The only way to prove this for sure would be to make two identical boxes with metal and wooden soundboards, both with the same thickness and size/shape of air holes. I'd bet good money that nobody could tell which was which...

Cheers

Ian

And even if there was a difference that still would be inconclusive, as anyone will know who has played two 'identical' new instruments  with the same soundboard material, and found that they don't sound quite the same.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Foam Melodeon
« Reply #28 on: March 27, 2008, 10:48:52 PM »

The only way to prove this for sure would be to make two identical boxes with metal and wooden soundboards, both with the same thickness and size/shape of air holes. I'd bet good money that nobody could tell which was which...

Cheers

Ian

And even if there was a difference that still would be inconclusive, as anyone will know who has played two 'identical' new instruments  with the same soundboard material, and found that they don't sound quite the same.

Indeed, but something I forgot to mention -- you use the same set of reed blocks in both instruments, this would account for almost all the sound difference (again, think what makes the sound and how it reaches our ears).

This would mean you couldn't do an instantaneous A/B comparison, it would have to be done by recordings, but the result would be equally valid.

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: Foam Melodeon
« Reply #29 on: June 23, 2008, 06:16:10 PM »

Hi,

I made some comparing of boxes with different soundboard on the same instruments.

There is a difference if different sound boards are used.
I used 0.5mm fiber glass 2mm aluminium and in the end i changed it back to 4mm pear wood.
The thickness of the board is within the possible range a major influence.

The contribution of the wood type is very little.

Wood type of the casework and the bass section especially with Helicon reeds has more effect.

I also made an other instrument without soundboard where the flaps operate on to the removable reed blocks.
All usable but in the end different to tell form where the differences all originate.

best regards, Johann



Logged

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: Foam Melodeon
« Reply #30 on: June 23, 2008, 06:43:12 PM »

Stormy wrote:

Quote
What I have learnt is that if anything moves in response to the reed or resonator we can then loose some of the sound, or get something a lot worse a "wolf".

Yes that is what is was telling for a long time, resonance in combination with reeds acts as attenuation not as amplification.

Or compared with electronic circuits it is not a parallel resonance it is a serial resonance.

But this does not mean we don't have resonance effect that change the sound quality.

best regards, Johann


Logged

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35
Re: Foam Melodeon
« Reply #31 on: June 24, 2008, 01:57:46 PM »

Hi All.Just me.

Peter. Fond regards.

At a party the other night, one of your Box's was being played by a lady I had not seen before. Given that the gathering included a young but very talented BC player on his new 3v Saltarelle, and my noisy self, I was quite impressed.

With the other boxes sounding quite decently, I was impressed with the 'Hyde' in a session environment. I had not had the honour of meeting one before. I do not know if its insides were balsa, foam or anything else, the music played on it certainly sounded good to my humble ear though!

All the fundamental fundumentals were where they should have been, and the result was - music.

More power to your overhead router mate. Congratulations on a great result.
Logged

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: Foam Melodeon
« Reply #32 on: June 24, 2008, 03:51:16 PM »

Hi again,

Unfortunately i never had the opportunity to hear one of Stormy Hydes boxes in reality.

I would love to he one especially this new foam Melodeon.

i only used balsa on one instrument for the reed blocks but not totally the top and the sole was pear wood.
Also the Helicon reed chambers ware made from balsa but also not totally.

Soundboard treble side aluminum with registers and soundboard bus section pear wood.

Treble side very good results but bass section more overtones and brighter as usual if i use spruce instead of balsa and pear wood.

I would think that for the buss section one needs some more weight to compensate  especially on very low notes.
Still the bass section is normally strong but quit different in sound middle range of tones are stronger as usual,
if i compare the spectrogram's with similar instruments by using the same reeds (replaces reeds).

I would have some questions on the construction of this Foam Melodeon.
About the mounting of keyboard and other mechanical parts, how did you overcome this problems if very soft material is used?

Is the keyboard traditional?
Is the soundboard as well made of Foam sandwich board?

How thick is the soundboard?


Best regards, Johann Pascher

Logged

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Foam Melodeon
« Reply #33 on: July 14, 2008, 12:15:22 PM »

Hi again,

Unfortunately i never had the opportunity to hear one of Stormy Hydes boxes in reality.

I would love to he one especially this new foam Melodeon.

i only used balsa on one instrument for the reed blocks but not totally the top and the sole was pear wood.
Also the Helicon reed chambers ware made from balsa but also not totally.

Soundboard treble side aluminum with registers and soundboard bus section pear wood.

Treble side very good results but bass section more overtones and brighter as usual if i use spruce instead of balsa and pear wood.

I would think that for the buss section one needs some more weight to compensate  especially on very low notes.
Still the bass section is normally strong but quit different in sound middle range of tones are stronger as usual,
if i compare the spectrogram's with similar instruments by using the same reeds (replaces reeds).

I would have some questions on the construction of this Foam Melodeon.
About the mounting of keyboard and other mechanical parts, how did you overcome this problems if very soft material is used?

Is the keyboard traditional?
Is the soundboard as well made of Foam sandwich board?

How thick is the soundboard?


Best regards, Johann Pascher


The sound board, (if we must call it that) is 4 mm thick, made up with 3 mm foam with .5 mm timber veneer on either side. This makes for a very strong and rigid board and there is no way the treble mechanism will pull out.
The treble mechanism is very traditional, but is 95% foam with wooden leavers and wire pallet arms.
This is a very small single voice 1 rower, but a person who has placed an order with me for a full sized foam instrument after playing the smaller one.

Any area where I have to put screws in have held very well by priming the holes first with PVA glue then waiting for it to dry before using the screw, this is also my practice in Balsa as well, where i have used it for the capping's on the reed blocks

If anybody would like to see a photo if this instrument then send me an email and I will send you a photo of it. Unfortunately I have just not had time to do a recording of it, but give me time.

I hope this finds you all well.
Stormy
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Foam Melodeon
« Reply #34 on: July 14, 2008, 12:45:41 PM »

What type of foam? I have looked through this thread several times and I don't think it has been specified. Fascinated by it all,
malcolm
Logged
aka malodeon

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Foam Melodeon
« Reply #35 on: July 14, 2008, 01:13:44 PM »

What type of foam? I have looked through this thread several times and I don't think it has been specified. Fascinated by it all,
malcolm
G'day Malcolm
This is where I have to draw the line I'm afraid, the person who is himself  an instrument maker (but not boxes) gave me the first bit of information on this, did ask that I do not mention the name of the product in my ramblings, as he has been using it for years and he feels it gives him a very big edge over his competition.
The only thing I can say is that it is definitely not polystyrene foam or anything like it.  I can only say look further afield.
Regards
Stormy
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: Foam Melodeon
« Reply #36 on: July 14, 2008, 02:14:29 PM »

Quote from: Peter Stormy Hyde
The sound board, (if we must call it that) is 4 mm thick, made up with 3 mm foam with .5 mm timber veneer on either side. This makes for a very strong and rigid board and there is no way the treble mechanism will pull out.
The treble mechanism is very traditional, but is 95% foam with wooden leavers and wire pallet arms.
This is a very small single voice 1 rower, but a person who has placed an order with me for a full sized foam instrument after playing the smaller one.

Any area where I have to put screws in have held very well by priming the holes first with PVA glue then waiting for it to dry before using the screw, this is also my practice in Balsa as well, where i have used it for the capping's on the reed blocks

If anybody would like to see a photo if this instrument then send me an email and I will send you a photo of it. Unfortunately I have just not had time to do a recording of it, but give me time.

I hope this finds you all well.
Stormy

Thank you for taking your time to answer, i am really surprised that you could use the foam material to that extent, i can understand that you are unable to give away all the details. I would be interested to see some pictures you could contact me personally at

johann.pascher@gmail.com.

best regards, johann
« Last Edit: July 14, 2008, 03:02:10 PM by JohannPascher »
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Foam Melodeon
« Reply #37 on: July 14, 2008, 02:57:45 PM »

What type of foam? I have looked through this thread several times and I don't think it has been specified. Fascinated by it all,
malcolm
G'day Malcolm
This is where I have to draw the line I'm afraid, the person who is himself  an instrument maker (but not boxes) gave me the first bit of information on this, did ask that I do not mention the name of the product in my ramblings, as he has been using it for years and he feels it gives him a very big edge over his competition.
The only thing I can say is that it is definitely not polystyrene foam or anything like it.  I can only say look further afield.

Regards
Stormy

No problem, it was just out of general interest. By the way I had a go on the box you made for Chris Timson, lovely box but very confusing to play so I look forward to trying a more standard box some time.
Finally have you ever tried aluminium reed blocks?

regards malcolm
Logged
aka malodeon

Peter Stormy Hyde

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 143
    • Hyde Accordions
Re: Foam Melodeon
« Reply #38 on: July 15, 2008, 12:24:36 AM »

What type of foam? I have looked through this thread several times and I don't think it has been specified. Fascinated by it all,
malcolm
G'day Malcolm
This is where I have to draw the line I'm afraid, the person who is himself  an instrument maker (but not boxes) gave me the first bit of information on this, did ask that I do not mention the name of the product in my ramblings, as he has been using it for years and he feels it gives him a very big edge over his competition.
The only thing I can say is that it is definitely not polystyrene foam or anything like it.  I can only say look further afield.

Regards
Stormy

No problem, it was just out of general interest. By the way I had a go on the box you made for Chris Timson, lovely box but very confusing to play so I look forward to trying a more standard box some time.
Finally have you ever tried aluminium reed blocks?

regards malcolm
Thanks for that plug on Chris's box , it is unusual as it is a Jeffries concertina layout ( G/D/ Accidental) with all the notes on the right hand, it is like the right hand of the concertina where you go up rather than down to the cross key scale. I found it good as I used to play a G/D Jeffries. and I intend to take it up again in retirement.
I have not tried aluminum reed blocks, as it would play havoc with the band saw, or the machining or casting would be very expensive, but if it was easier my inclination would be, that it would be very good.

If any of you run into Tristan Glover from the Chipolatas have a word with him about the foam box as he had a play on it at Port Fairy folk festival.
Logged
"Locally Made; Globally Played". Truly custom made melodeons. your total needs are met in the construction of your personalized instrument. People with physical disabilities are catered for as far as possible.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Foam Melodeon
« Reply #39 on: July 15, 2008, 10:32:20 PM »

Again; I'm no expert on the fiddle, but are the back and the front the resonators, and they have a sound post between them to keep them in phase? From this; it would suggest to me that if the timber in the melodeon was to resonate to much we would quite likely end up needing sound posts to keep all the parts in phase, I have never heard of one that was out of phase and would not play have you?

One of my problems is that I read too much and then forget where I've seen it (senior moments  ::)) but I recently read something about banks of treble reed blocks in instruments with three voices (MMM) needing to be physically 'shorted out' and I believe that was to keep them in phase and prevent the tremolo reeds cancelling each other out. My old Hohner three voice has what look like nails bridging the gaps between the blocks and I had wondered what they were there for as the blocks don't seem to be in imminent danger of toppling over.

Or am I talking rubbish as usual?

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal