Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Resurfacing pallets?  (Read 4190 times)

0 Members and 1 Guest are viewing this topic.

chrisstevens

  • Member
  • *
  • Offline Offline
  • Posts: 16
Resurfacing pallets?
« on: February 04, 2010, 08:34:08 PM »

Just acquired a Hohner 114 - I'm getting a little leakage and clacking from the pallets, so I'm going to resurface them. Few quick questions:

What material do you use for the pallet leather and felt?

Whats the best way to remove the old material?

Can I pull all the pallets out at once by unscrewing from the soundboard and avoid removing them from the fulcrum?

Thanks for your help!
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Resurfacing pallets?
« Reply #1 on: February 06, 2010, 04:51:28 PM »

I was looking forward to some answers on this.   What I plan to do is buy the combined felt/leather material from CGM Musical, now on Ebay **HERE**

On my box the pallets are held on to the levers with wax (I think), so should be removable by warming the metal with a soldering iron.   Handling the pallets separately will I think make it easier to prepare them, and then I can just glue them all onto the sheet of felt before cutting them off individually.
Logged
Tony S

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Resurfacing pallets?
« Reply #2 on: February 06, 2010, 05:58:06 PM »


What material do you use for the pallet leather and felt?

I bought mine ready made from Theo

Quote
Whats the best way to remove the old material?

Just peel it off then scrape/sand the old glue off

Quote
Can I pull all the pallets out at once by unscrewing from the soundboard and avoid removing them from the fulcrum?

I wouldn't unless I was forced to, the pallets are far easier to handle off the levers and you can glue them to the new facing all in one go and when you cut them apart they are already trimmed. Clean out the slot, pop them back into place and add a blob of hot melt glue to secure.

Pete  (:)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: Resurfacing pallets?
« Reply #3 on: June 17, 2011, 10:36:17 AM »

*bump*
I was just thinking,is it possible just to sand the leather until the surface is flat again? i think its thick enough.
Logged

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Resurfacing pallets?
« Reply #4 on: June 17, 2011, 10:53:54 AM »

*bump*
I was just thinking,is it possible just to sand the leather until the surface is flat again? i think its thick enough.

The best bet is probably to peel off what you can first.
Then lay a piece of 60 grit sandpaper on a flat surface and rub them across this until the surface is completely clean.

Also you might have to raise the button height slightly if the new pallet facing material is thicker than the original.
This is the material you need http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html#3
One piece should be enough for a one row box.

Martyn
www.melodeonrepairs.co.uk
« Last Edit: June 17, 2011, 11:07:28 AM by Martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: Resurfacing pallets?
« Reply #5 on: June 17, 2011, 11:06:53 AM »

yeah,it worked on the first but already on the second the leather broke,so now i have to do a war repair cause im gonna play this box tonight! hmm i wish i have some leather i can use
Logged

rmenhinick

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Resurfacing pallets?
« Reply #6 on: June 17, 2011, 11:07:26 AM »

Help! I'm about to resurface the pallets on an old three voice 1 row box and I've bought facing material from CGM - which side do I glue to the wooden pallet... felt or leather?  ???

I've been pondering this for days and then realised that the sensible thing to do is ask!!  ::)
Logged
Old G Poker, New DG Poker, ADG Compadre, DG Sandpiper, CF Erica, GC Delicia Popular, DG Dino Baffetti Black Pearl 3, Casali Verona 48 bass PA, (Squeezebox Squirrel :D)

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: Resurfacing pallets?
« Reply #7 on: June 17, 2011, 11:09:48 AM »

Help! I'm about to resurface the pallets on an old three voice 1 row box and I've bought facing material from CGM - which side do I glue to the wooden pallet... felt or leather?  ???

I've been pondering this for days and then realised that the sensible thing to do is ask!!  ::)

Glue the pallet to the felt side.

Martyn
www.melodeonrepairs.co.uk
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

rmenhinick

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Resurfacing pallets?
« Reply #8 on: June 17, 2011, 11:12:06 AM »

Help! I'm about to resurface the pallets on an old three voice 1 row box and I've bought facing material from CGM - which side do I glue to the wooden pallet... felt or leather?  ???

I've been pondering this for days and then realised that the sensible thing to do is ask!!  ::)

Glue the pallet to the felt side.

Martyn
www.melodeonrepairs.co.uk

Thanks Martyn - I kind of thought that the leather should be the working surface ... but I had one of those nagging little doubts! Your reassurance is much appreciated!  ;)
Logged
Old G Poker, New DG Poker, ADG Compadre, DG Sandpiper, CF Erica, GC Delicia Popular, DG Dino Baffetti Black Pearl 3, Casali Verona 48 bass PA, (Squeezebox Squirrel :D)

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: Resurfacing pallets?
« Reply #9 on: June 17, 2011, 11:18:08 AM »

CGM:s pre-made felt/leather seems great,too bad not living in UK.

I hade some leather wich saves the night,have to make a proper reparation later.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Resurfacing pallets?
« Reply #10 on: June 17, 2011, 01:39:12 PM »

CGM:s pre-made felt/leather seems great,too bad not living in UK.


Charlie will post worldwide; I had a delivery from him to Cyprus and it only took a day longer than internal UK post.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Resurfacing pallets?
« Reply #11 on: June 17, 2011, 03:14:05 PM »

nfldbox

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 492
Re: Resurfacing pallets?
« Reply #12 on: June 17, 2011, 03:18:09 PM »

CGM is good to North America. Also, not having the pallet totally clean before you glue the felt to the wood CAN cause you trouble but it can work without sanding the pallet and might be worth a try. I didn't sand and only had to do a corrective clean on two pallets.
Logged
BC Cairdin
BC Hohner Double Ray
Bouchard en Ré

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: Resurfacing pallets?
« Reply #13 on: September 20, 2011, 10:12:04 AM »

After resurfacing the pallets in june with some leather i had at home it worked well but i discovered the chord pallets were still leaking,so yesterday i took them ou and applied felt/leather,i guess its the sam as CGM sales,iv got mine from a swedish supplier.
Anyway,its not better, i think the whole action has to be adjusted,so how to do that whiout wrecking the whole bass end?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Resurfacing pallets?
« Reply #14 on: September 20, 2011, 10:27:44 AM »

After resurfacing the pallets in june with some leather i had at home it worked well but i discovered the chord pallets were still leaking,so yesterday i took them ou and applied felt/leather,i guess its the sam as CGM sales,iv got mine from a swedish supplier.
Anyway,its not better, i think the whole action has to be adjusted,so how to do that whiout wrecking the whole bass end?

Did you remove the pallets from the action prior to refacing them and then refit them? If not it is more than likely that the pallets are no longer flush with the soundboard as the whole geometry will have changed due to the different thickness off the new facing.

To find the offending pallet what I have done in the past is to lift each pallet in turn and cover the hole with masking tape (a bit fiddly). Then test for leakage, this will allow you to find the pallet that needs adjustment.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Resurfacing pallets?
« Reply #15 on: September 20, 2011, 10:56:55 AM »

Lester is spot on about removing and re-fitting the pallets, it is essential.  Also check for weak springs, and tight pivot joints, with the springs released the levers should move freely under their own weight.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: Resurfacing pallets?
« Reply #16 on: September 21, 2011, 08:58:43 AM »

Yes i removed the pallets before refacing,thats the only way to do it on this box i guess. Its easy since they are screwed on,and maybe thats why there leaking,a waxed pallet always get right angle.
I know wich pallet is leaking most so its maybe a weak spring. Or maybe have to hook the action.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal