Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Accordion Repair shop  (Read 10328 times)

0 Members and 1 Guest are viewing this topic.

chrisstevens

  • Member
  • *
  • Offline Offline
  • Posts: 16
Accordion Repair shop
« on: February 15, 2010, 05:31:12 PM »

I'm thinking of starting to learn how to repair all types of accordions & concertinas, I've been playing button accordion and anglo concertina for 12 years now but I'd like to learn how to repair my instruments and also make a few bucks by restoring and tuning other instruments, especially since that type of place is few and far between where I live (as far as I know) I've always been fooling with my instruments, so I think this will be enjoyable and come reasonably natural...

What are the best resources, in terms of books, etc., for accordion repair?  I'm planning on shadowing a technician or two as well, but it's good to have a "bible"...

What sorts of tools does one need to operate as a technician? specifically...tuning? How much should I plan to spend on the tools, once I figure out the techniques?

Any words of advice?
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Accordion Repair shop
« Reply #1 on: February 16, 2010, 12:50:26 AM »

Wow, where to start?  There have been a number of threads on repair techniques and tools here for melodeons, most of which are equally applicable to other accordion types.  You don't say where you are based, although there are never too many repairers.  Going beyond minor tinkering on your own boxes will involve a learning curve and only you will know when you can go from doing it as a hobby to making a living at it.  In the meantime, don't give up the day job!

You certainly find that those with experience will answer specific queries here on the forum, often in the past accompanied by photos of the job in hand.  Theo, Rees and others have always been generous in their help and advice.  Good luck.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Accordion Repair shop
« Reply #2 on: February 16, 2010, 08:55:48 AM »

To the best of my knowledge there are no accordion repair courses in the UK.   There is the melodeon building course run by EATMT. Emmanuel Pariselle who teaches this course does run similar courses elswhere.

I think that there may be some tuition available in Italy, and perhaps in Germany, but I don't have any details.  Most people doing this sort of work seem to be self taught.  The way to do this is to start acquiring old boxes in poor condition, strip them down, and rebuild them and learn by trial and error and observation.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Aaro

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
    • Luukinen Accordions
Re: Accordion Repair shop
« Reply #3 on: February 16, 2010, 11:45:07 AM »

We have here in Finland, the Nordic countries, is the accordion repair and manufacturing school.
Ikaalinen College of Crafts and Design - IKATA.
During the summer there is a one-week, accordion repair course. There are basic things accordion tuning, repair etc..

I'm studying in this school also my family has been a manufacturer and accordion repairman, through which it has come to me.

Aaro
Logged
Luukinen Accordions offers a full line of fine handcrafted custom made accordions.

OwenG

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 297
Re: Accordion Repair shop
« Reply #4 on: February 16, 2010, 01:47:53 PM »

I see from a quick scan of e-bay that old Piano Accordions are a lot cheaper than old Melodeons.

I was wondering whether the innards of a Piano Accordion are sufficiently similar to a Melodeon to warrant getting hold of an old PA as something to practice repairs on without too great a financial or emotional outlay?
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Accordion Repair shop
« Reply #5 on: February 16, 2010, 02:19:38 PM »

Looks like there are two options,

1) Learn Finnish and go on the course Aaro mentions, but

2) If you're really quick you may be in time to enrol on this semester's Mal.net course, synopsis as follows:-


Module A1 - By study of past threads in "Instrument construction and repair" to gain an understanding of instrument design and construction, repair methodology, and tools and equipment required.  Completion of this module will demonstrate the participant's commitment, tenacity, and capacity to collate and evaluate information from multiple sources.

Module A2a (concurrent) - To acquire, build and/or improvise the equipment and tools identified in A1.Completion of this module will demonstrate the participant's commitment, tenacity, improvisation and ingenuity as well as developing and improving basic craft skills.

Module A2b (concurrent) - To identify, evaluate and acquire a derelict melodeon for refurbishment. Completion of this module will demonstrate the participant's commitment, tenacity, improvisation and ingenuity as well as developing and improving basic craft skills and demonstrating financial commitment.

Module A3 - To plan and execute a full refurbishment of the item acquired in A2b.  Completion of this module will demonstrate the participant's commitment, tenacity, improvisation and ingenuity as well as developing and improving basic craft skills and demonstrating financial commitment.  It will also provide insights into the participant's motivation.  Successful completion of this module requires that the refurbished instrument could be sold to an experienced player at a viable market price.

Module B1 (Concurrent) - To undertake an (external) Business Studies course and evaluate the prospects of financial viability of a free-reed instrument repair business including assessment of the alternative income sources that will be necessary to avoid a chronic resource deficit situation.

Sadly there's no certificate at the end.

 ;D
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Accordion Repair shop
« Reply #6 on: February 16, 2010, 05:01:33 PM »

making a living at it.

I'm sorry, what is this "making a living at it" that you speak of?. ???  ;D

Giving advice in these situations is pretty difficult because for every one person with the potential and aptitude who's appreciative of the reality of such work and has realistic expectations of what they're going to achieve there are several more who don't and it's near impossible to tell them apart at first without knowing them personally. The following article specifically refers to guitars but the main thrust is just as true elsewhere...

http://www.cumpiano.com/Home/Articles/Articles/pedagog.htm

My advice would be to learn how to do it first and don't worry about maybe trying to make money from it until later. You'll find musical instrument makers and techs fall into two categories...

A) Reasonably financially secure after several decades in another career who don't have a mortgage or rent to pay and no longer have to support their children if they have any.

B) Have one or more other jobs to make ends meet or, if they're incredibly lucky, a partner or spouse with a well-paying job who can financially support them.

You're not going to be able to get a book or go on a course and you'll suddenly be a bona fide instrument technician who can start making money straight away, (It's been eight years since I first started tinkering with guitars and I'm only just starting to make money out of it), they'll only ever be a start. However, you can have an immensely fun and rewarding hobby that, in time and with some valuable experience under your belt, you might be able to make pay for itself.
« Last Edit: February 16, 2010, 05:26:39 PM by WhatsAMelodeon? »
Logged

boxlad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 291
    • Ray Ó Díomasaigh
Re: Accordion Repair shop
« Reply #7 on: February 16, 2010, 05:27:52 PM »

Usus est magister optimus!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Accordion Repair shop
« Reply #8 on: February 16, 2010, 07:27:45 PM »

I see from a quick scan of e-bay that old Piano Accordions are a lot cheaper than old Melodeons.

I was wondering whether the innards of a Piano Accordion are sufficiently similar to a Melodeon to warrant getting hold of an old PA as something to practice repairs on without too great a financial or emotional outlay?

Yes.

And if you can take the reeds from a piano accordion and alter them to play in a melodeon you will learn a great deal about reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Accordion Repair shop
« Reply #9 on: February 16, 2010, 08:03:03 PM »

I see from a quick scan of e-bay that old Piano Accordions are a lot cheaper than old Melodeons.

I was wondering whether the innards of a Piano Accordion are sufficiently similar to a Melodeon to warrant getting hold of an old PA as something to practice repairs on without too great a financial or emotional outlay?

Yes.

And if you can take the reeds from a piano accordion and alter them to play in a melodeon you will learn a great deal about reeds.

I just got a little 24 bass accordion for pocket money off of eBay. Unfortunately I found it to be such a "cute" box (the treble grille is really nice, try to add a piccy when I am closer than 800 miles to it) my intention to use the bellows as a tuning table and mess around with the reeds has now been cancelled. So back to eBay

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Accordion Repair shop
« Reply #10 on: February 17, 2010, 02:41:01 AM »

I see from a quick scan of e-bay that old Piano Accordions are a lot cheaper than old Melodeons.

I was wondering whether the innards of a Piano Accordion are sufficiently similar to a Melodeon to warrant getting hold of an old PA as something to practice repairs on without too great a financial or emotional outlay?

Yes.

And if you can take the reeds from a piano accordion and alter them to play in a melodeon you will learn a great deal about reeds.

I just got a little 24 bass accordion for pocket money off of eBay. Unfortunately I found it to be such a "cute" box (the treble grille is really nice, try to add a piccy when I am closer than 800 miles to it) my intention to use the bellows as a tuning table and mess around with the reeds has now been cancelled. So back to eBay

I know the feeling. Thanks to the kindness of Rob of this parish I now have a very sweet 1140 one-row, the one with the four bass buttons. I was planning to try to restore it myself, but I like it so much that I think I'll find the money from goodness knows where and get Theo to do it for me :P Plus it's a bugger of a box to do anything with, the fingerboard is glued on, the thumb strap (which has torn off) was riveted to the underside, completely irremovable and inaccessible and the reeds are waxed directly onto the soundboard, no reedblocks. I am not sure how one would tune them, except with great difficulty. One reed plate is rattling, all the others are OK, all valves are perfect, it only needs a retune, so I'm guessing it will be fairly cheap.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Accordion Repair shop
« Reply #11 on: February 17, 2010, 08:14:31 AM »

..... and the reeds are waxed directly onto the soundboard, no reedblocks. I am not sure how one would tune them, except with great difficulty.
You can tune the reeds in-situ. Theo showed me how to do this. The melodeon's own bellows are going to serve as a tuning bellows.
First, you need to make a suspension frame for the bellows. This is a sort of open squared-off 'U' shaped plywood frame, made of, say, 9 mm thick ply. The inside width of the U is just a bit narrower than height of the bellows; the short upright sides of the U are the same length as the width (front to back) of the bellows.

The idea is to make a sort of fork for the last valley fold of the bellows to slot into and from which you can allow the instrument to dangle downwards. The 'tines' of the fork need to be about 2-3 inches wide for strength and sanded smooth and rounded on the inside edge so that it doesn't damage the inside of the bellows fold when you slot the instrument in.

The base of the 'U' needs to be about quite wide, say 6-8 inches, so you can clamp it securely to a bench or table top, leaving the tines of the fork projecting over the edge.

To use it, you pull the bellows pins and remove the end you wish to tune - the treble end for example. Suspend the remainder of the instrument in the fork tines, by carefully slotting the last bellows valley fold into the tines, with the open bellows end facing upwards and allowing the rest of the bellows and the bass end to dangle down freely.

You can now sound individual notes on the treble end by placing it in position over the open end of the bellows, pressing the required button and pushing or pulling the other end of the bellows up or down as required. The bellows gasket should create sufficient air-seal to allow a reasonable length of time for the note to sound and register on a tuning meter. There is a certain amount of dexterity required to keep the treble end in place, but you soon get the hang of it.

You can now proceed to test and tune the reeds one at a time. The push reeds are easy enough to get to; they will be ones facing uppermost. The pull reeds will be on the underneath of the reed plate and you will need to use a reed tongue lifter to raise the reed tongue from its slot in order to file it. As your instrument is a two voice, with two reeds per button, you need to blank off an entire row by using masking tape under the pallets, so you only hear and tune one voice at a time.

Before you even start the tuning process, you should ensure that all the valves are in good condition - replace any as necessary, and that all the wax is sound. If the instrument is at all old, it is probably worth cleaning off all the old wax and re-waxing all the reeds with new wax.

Hope this helps this particular bit of the process. As usual, Theo, Rees and a few others are experts and I'm sure will be able add their wisdom as necessary.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Accordion Repair shop
« Reply #12 on: February 17, 2010, 08:58:47 AM »

[ One reed plate is rattling, all the others are OK, all valves are perfect, it only needs a retune, so I'm guessing it will be fairly cheap.

If one reed plate is rattling there is little point in retuning without first getting rid of the old wax.  If the wax is giving way, even in one place, then its at the end of its life.  You can patch it up, but its just a temporary repair.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Accordion Repair shop
« Reply #13 on: February 17, 2010, 01:29:46 PM »

[ One reed plate is rattling, all the others are OK, all valves are perfect, it only needs a retune, so I'm guessing it will be fairly cheap.

If one reed plate is rattling there is little point in retuning without first getting rid of the old wax.  If the wax is giving way, even in one place, then its at the end of its life.  You can patch it up, but its just a temporary repair.

I was afraid of that :( Messy job methinks, although if I am canny I can use the department's soldering irons, which have an analogue temperature dial.

Hope this helps this particular bit of the process. As usual, Theo, Rees and a few others are experts and I'm sure will be able add their wisdom as necessary.

Thanks for that Steve, it looks slightly more doable than I had at first anticipated (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Accordion Repair shop
« Reply #14 on: March 01, 2010, 08:47:34 PM »

Germany offers a 4 year course (graduation: "Gesellenbrief"), either in Trossingen or in Klingenthal (at least, these were the options some time ago, when I was involved myself, first as a student and in later years as a teacher). This will provide you with a solid platform for gaining further knowledge and experience once on your own. Without proper tuition you'll most likely not be able to do a first class job, neither when repairing nor when tuning.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal