Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 12 bass conversion  (Read 2137 times)

0 Members and 1 Guest are viewing this topic.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Hohner 12 bass conversion
« on: February 24, 2010, 11:50:05 PM »

I'm planning on converting a Club II and an Erika to 12 basses. I understand how the mechanism works and making new reedblocks, moving the blocks that hold them on the baseboard and drilling the extra holes are no problem, the only obstacle so far is the hardware.

The metal thingy that screws onto the baseboard that the axle rod and springs go on, (what's it called?), can only accept 8 levers. Would the 8 existing levers, supplemented by others of the same type, fit on another one of them for a 12 bass Hohner, such as a Corona, or are Hohner bass mechanisms sufficiently different from each other to require having to remove the original mechanism and transplant an entire 12 bass one?.
« Last Edit: February 25, 2010, 12:28:38 AM by WhatsAMelodeon? »
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Hohner 12 bass conversion
« Reply #1 on: February 25, 2010, 08:36:26 AM »

An example can be found in this thread
may be Malcolm Clapp will give you some more information.
Quote:
"Added a pair of "new" buttons at each end of the original set, re-arranged the action and extended the reed blocks. PITA of a job, which I probably will never repeat!"
Logged
aka malodeon

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Hohner 12 bass conversion
« Reply #2 on: March 07, 2010, 04:47:26 AM »

If you want to save yourself a lot of trouble. Try to obtain the bass mechanism and blocks from a corona II. The mechanism parts are essentially the same; just 12 basses instead of 8. However I don't believe the arm that extends from the button to the mechanism is the same. So you will need to find, make, or modify 4 new arms. I hope this helps. I'm currently building a custom 2 row 3 voice with 12 basses, designed somewhat around the Hohner Pokerwork. Rather that re-post an entire set of pictures, here is a link to pictures of my project: www.reyesforum.com  > Forums > Tim's Corner > Please Welcome Tim Schofield
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal