Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Should reeds be tuned from the back?  (Read 2435 times)

0 Members and 1 Guest are viewing this topic.

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Should reeds be tuned from the back?
« on: February 26, 2010, 05:45:55 PM »

Some people say that the coating on the back of reeds should not be interfered with and that reeds should be tuned from the front - any opinions?
Update: question was due to a misunderstanding and is no longer relevant.
« Last Edit: February 26, 2010, 09:18:51 PM by GanAinm »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Should reeds be tuned from the back?
« Reply #1 on: February 26, 2010, 05:56:21 PM »

Some people say that the coating on the back of reeds should not interfered with and that reeds should be tuned from the front - any opinions?

I'm interested to know which people say that?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Should reeds be tuned from the back?
« Reply #2 on: February 26, 2010, 06:25:22 PM »

I'm interested to know which people say that?

A UK-based tuner/restorer that I exchanged some emails with recently has a strongly-held view that reeds should not be to tuned from the rear, because:

1. the rear has a blue stainless surface that prevents rust build-up and
2. higher reeds can be distorted by raising them through the slot

I wondered whether others were of the same opinion.



Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Should reeds be tuned from the back?
« Reply #3 on: February 26, 2010, 06:34:08 PM »

Interesting.

I've seen plenty of reeds where the blue coating has no signs of any scratches, but is still well rusted.   AFAIK the blue coating is a by-product of the heat treatment process used in making the steel, its not particularly intended to be an anti corrosion coating, though it may have that property to some extent.

I very much agree that (higher reeds especially) have to be treated with great care to avoid distortion, but once I'd learned by trial and much error I find I can tune the highest reeds ok from above, but I'm always interested in other approaches.

How does your tuner friend get access to the reeds then?   Does he take them off the block to tune, or does he have a way of working on the reed tongue via the vent in the base of the reedblock?   

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Should reeds be tuned from the back?
« Reply #4 on: February 26, 2010, 07:27:11 PM »

How does your tuner friend get access to the reeds then?   Does he take them off the block to tune, or does he have a way of working on the reed tongue via the vent in the base of the reedblock?

As far as I understand, he takes the reeds off the block for tuning, but I don't know how he does the final fine-tuning.

I will draw his attention to this thread and perhaps he may (or may not) choose to participate in the discussion.

The tip was given as was part of a friendly and helpful email exchange and I don't want to bring him into a public discussion, unless he chooses to join in.
Logged

GanAinm

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Should reeds be tuned from the back?
« Reply #5 on: February 26, 2010, 09:17:08 PM »

The tip was given as was part of a friendly and helpful email exchange and I don't want to bring him into a public discussion, unless he chooses to join in.
We have been back in email contact and I misunderstood his position.
His advice is to work on the front of the reed where possible and to be careful when working on the back of reeds.
I expect most people agree and, in this case, the original question is now no longer relevant.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Should reeds be tuned from the back?
« Reply #6 on: February 27, 2010, 09:12:36 AM »

The tip was given as was part of a friendly and helpful email exchange and I don't want to bring him into a public discussion, unless he chooses to join in.
We have been back in email contact and I misunderstood his position.
His advice is to work on the front of the reed where possible and to be careful when working on the back of reeds.
I expect most people agree and, in this case, the original question is now no longer relevant.

I agree, but would add that you must be careful working on the front of the reed too!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal