Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wanted - photo of Hohner Corona bass mechanism  (Read 2338 times)

0 Members and 1 Guest are viewing this topic.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Wanted - photo of Hohner Corona bass mechanism
« on: February 28, 2010, 04:01:03 AM »

I dont know anyone with one I can have a look inside and Google images turns up nothing but does anyone know if there's a photo of a Corona bass mechanism online anywhere?.

As I've said elsewhere, I've got a Club II and an Erika I want to convert to 12 basses and I'm wondering about the possibility of using Corona bass mechanisms, which I'm hoping I'll be able to obtain through someone authorised to deal in Hohner spares and get to fit with a little bending of the levers, and I'd like to be able to get a look at one before I spend anything in case it won't go.
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: Wanted - photo of Hohner Corona bass mechanism
« Reply #1 on: March 04, 2010, 12:05:25 AM »

I don't suppose a Corona II bass end would fit directly on a Corso or Club III?
Logged

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: Wanted - photo of Hohner Corona bass mechanism
« Reply #2 on: March 04, 2010, 08:46:45 AM »

Hohner Corona III R bass end
Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wanted - photo of Hohner Corona bass mechanism
« Reply #3 on: March 04, 2010, 09:26:15 AM »

That is different from some Corona bass mechanisms,  which have only 3 chord reeds, and no reeds shared between bass and chord.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Wanted - photo of Hohner Corona bass mechanism
« Reply #4 on: March 04, 2010, 06:56:32 PM »

Thanks, Michik.

Hmm, that is quite different. The 8 bass Club mechanism has 3 chord reeds covered by trapezoidal pallets and large square ones covering the bass reeds underneath them with no sharing.

Another course of action could be to drill the extra holes, one set at each end, shift the existing mechanism over to one end and then get an 8 bass mechanism, from another Club or a Pokerwork if it's similar, and cut it in half to serve the remaining 4 buttons. Any thoughts?.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wanted - photo of Hohner Corona bass mechanism
« Reply #5 on: March 04, 2010, 07:04:55 PM »

New Corona bass mechanism from Hohner.   I have a spare one if you want it.   Will need to check the price.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Wanted - photo of Hohner Corona bass mechanism
« Reply #6 on: March 05, 2010, 12:06:13 AM »

That looks very promising...

Thanks Theo, I'll email you.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal