Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Replacement Pokerwork Thumb Strap?  (Read 1985 times)

0 Members and 1 Guest are viewing this topic.

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Replacement Pokerwork Thumb Strap?
« on: March 02, 2010, 08:11:20 AM »

I've been given a rather badly distressed pokerwork to repair and the owner wants a new thumb strap. The keyboard is the newer plastic style with two black rivets holding what is left of the strap in place. By the looks of things it shouldn't be too hard to bend the tops of the rivets to allow them to come free, and it would be working on the inside so there shouldn't be any marks. The question is, is there and easy way to fit a new one?

I see from the Hohner parts list they have 'thumb strap' listed for €2.50. Has anyone actually bought one; does it come with two rivets; do you need a specially shaped riveting tool to attach them inside the confined space of the keyboard?

They sell a complete replacement 2915 keyboard with strap, perhaps it would be easier just to get the whole unit?

Opinions please!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacement Pokerwork Thumb Strap?
« Reply #1 on: March 02, 2010, 09:46:32 AM »

It is fairly easy to remove the old rivets, but take the keyboard off first.  Then cut away the remains of the straps so the rivets are left sticking out.  Clamp the projecting ends of both rivets in the vice and then use a drill of a larger size than the rivet shank to drill off the inside end of the rivets.  The remains should then pull out.  If the thumbstraps on sale from Hohner are the same synthetic material as on new boxes I would avoid them.  Just find a suitable scrap of leather and cut to size.  Pop rivets should do to fit the new strap, but be sure they are big enough to be a snug fit in the holes, and use a matching washer on the inside, the keyboard plastic is easy to crack if you apply to much force on a small area.  Rivets sold for leather work may also be suitable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

oolong32

  • Member
  • *
  • Offline Offline
  • Posts: 48
  • G/C Serafini R2D2, C/F Pokerwork, C/F Hohner Norma
Re: Replacement Pokerwork Thumb Strap?
« Reply #2 on: October 17, 2013, 01:35:31 PM »

Has anybody tried fitting thumbstrap with a wing bolt or something similar? As I am not sure about how tight the strap needs to be, I might have to adjust it a few times until it fits.
Logged
♭ ♮ ♯

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: Replacement Pokerwork Thumb Strap?
« Reply #3 on: October 19, 2013, 08:52:01 AM »

Has anybody tried fitting thumbstrap with a wing bolt or something similar? As I am not sure about how tight the strap needs to be, I might have to adjust it a few times until it fits.
Wing bolt? Never did. Not sure if I would feel well with a hole in my stomach :|bl

Normally they use just a normal bolt with a counter nut.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal