Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Sticky stuff  (Read 3835 times)

0 Members and 1 Guest are viewing this topic.

strad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 418
Sticky stuff
« on: March 13, 2010, 12:20:19 PM »

What adhesives/glues to people use for what when they are refurbishing a box?
There are just so many choices it makes me conthused!

Nigel
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Sticky stuff
« Reply #1 on: March 13, 2010, 12:39:17 PM »

I use white PVA wood glue for the majority of jobs including bellows tape. Hot melt glue to attach pallets to arms and a dab of Evo-stik contact glue or Bostik general purpose for valves.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Sticky stuff
« Reply #2 on: March 13, 2010, 04:13:28 PM »

I use white PVA wood glue for the majority of jobs including bellows tape. Hot melt glue to attach pallets to arms and a dab of Evo-stik contact glue or Bostik general purpose for valves.

Same here.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Sticky stuff
« Reply #3 on: March 13, 2010, 07:51:53 PM »

Although I have used other adhesives for this purpose, I tend to like reed wax for attaching pallets to the lever arms.  It's what I discovered to be the original adhesive used on my earliest project instruments, which were PA's. The oldest of these is now about five years hence, and no problems yet. Easy to flow the adhesive throughout the joint. The one advantage I see is that if the pallet should ever lose its correct seal, you merely need to reheat the wax a bit and everything is right again.

Has anyone else used this method, or encountered subsequent problems with it?

Bob
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Sticky stuff
« Reply #4 on: March 13, 2010, 09:22:07 PM »

Has anyone else used this method, or encountered subsequent problems with it?

Bob

I've not tried this but it sounds like it would work perfectly well as long as you have a steady hand when applying it (hot wax does tend to flow rather well). The hot melt stuff has the advantage of staying slightly flexible and although it seems to stick well can be simply peeled away when the time comes to get it off. (I should add here that I made a mistake and had to remove a pallet several minutes after glueing it in, perhaps this isn't so easy after a longer period of time!)

One bit of 'sticky stuff' I forgot to mention earlier is wallpaper paste, handy if you need to re-cover stained old papers on bellows.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Sticky stuff
« Reply #5 on: March 13, 2010, 10:02:51 PM »

My old Castagnari Sander has the pallets waxed on.
No problems encountered.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

TonyRussellDavis

  • Tony Russell Davis (Black Sheep Tone/BLT)
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 192
  • Mandos'n'guitars'n'boxes'n'pipes'n'stuff.
Re: Sticky stuff
« Reply #6 on: March 15, 2010, 02:30:52 PM »

Talking of wax - only yesterday I was invited to look over an empty cottage that was being cleared out, with permission to take anything useful. Look what I found!!!
Tony. BTW, I know what it is.
« Last Edit: March 15, 2010, 02:35:54 PM by TonyRussell »
Logged
Call if you're ever in North Yorkshire.

HallelujahAl

  • Guest
Re: Sticky stuff
« Reply #7 on: March 16, 2010, 09:28:14 AM »

Leather Weld from Tandy (the leather supplies people) for any leather work i.e gussets etc.
PVA for bellows papers etc.
Wood glue for any wood joints (obvus ain't it)
Evo stick contact adhesive for valves (although I have cheated and used this glue on all sorts of things when I want a quick repair that's going to hold forever). Evo stick have recently changed the formula in their contact adhesive which gives less 'wriggle' time. So I also get a general purpose glue from Wilkinsons which is better if I need to make slight adjustments in the gluing process as it doesn't set so quickly.
PVA for pads etc...

A well ventilated room  ;)
AL
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Sticky stuff
« Reply #8 on: March 16, 2010, 11:17:55 AM »

What would you use to glue felt and leather onto the pallets?   I think PVA would soak into the felt and harden it.
Logged
Tony S

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Sticky stuff
« Reply #9 on: March 16, 2010, 11:26:24 AM »

What would you use to glue felt and leather onto the pallets?   I think PVA would soak into the felt and harden it.

Just use a very thin film of pva, applied with a smooth spatula, so it does not soak in.

Edited to clarify:

The thin film of pva should be applied to the wood, not to the felt.  Then press the felt onto the wood.
« Last Edit: March 16, 2010, 01:09:49 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Sticky stuff
« Reply #10 on: March 16, 2010, 01:09:31 PM »

Talking of wax - only yesterday I was invited to look over an empty cottage that was being cleared out, with permission to take anything useful. Look what I found!!!
Tony. BTW, I know what it is.
Looks like a tjanting to me - a traditional Indonesian tool used for applying melted wax to fabric in the Batik dyeing process.
I made one myself years ago from an old toilet cistern ball-valve copper float. I've not seen one which had the flow regulator device though.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

TonyRussellDavis

  • Tony Russell Davis (Black Sheep Tone/BLT)
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 192
  • Mandos'n'guitars'n'boxes'n'pipes'n'stuff.
Re: Sticky stuff
« Reply #11 on: March 16, 2010, 01:14:44 PM »

Sure is, Steve - there were three of the more usual batik wax "pens" there too. But they're brilliant for running the wax round reeds!
Logged
Call if you're ever in North Yorkshire.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Sticky stuff
« Reply #12 on: March 16, 2010, 01:30:56 PM »

Sure is, Steve - there were three of the more usual batik wax "pens" there too. But they're brilliant for running the wax round reeds!
I'll have to dig mine out of retirement and try it!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Sticky stuff
« Reply #13 on: March 16, 2010, 01:52:16 PM »

Sure is, Steve - there were three of the more usual batik wax "pens" there too. But they're brilliant for running the wax round reeds!
I'll have to dig mine out of retirement and try it!

Now why am I not suprised that you own batik pens   ;D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal