Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Neutering the basses on an Erica  (Read 4771 times)

0 Members and 1 Guest are viewing this topic.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Neutering the basses on an Erica
« on: March 16, 2010, 05:44:56 PM »

I have to tape off the thirds in a student's Erica and want to perform the spaying operation in about 10 or 15 minutes before a class later this week.

I remember reading that doing this on a Hohner Black Dot or Erica is not as straightforward as on models by other makers because the thirds aren't in a nice straight line on the reedblocks. Not having an Erica lying around the house I was wondering if anybody can give me some pointers to locating the thirds quickly.

Merci d'avance

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Neutering the basses on an Erica
« Reply #1 on: March 16, 2010, 05:48:16 PM »

I'm not sure if they are the same as on my Pokerwork, but I mapped out where the various reeds were when I took the thirds out of mine. I can email you the word document if you want.
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Neutering the basses on an Erica
« Reply #2 on: March 16, 2010, 05:50:04 PM »

Whoa, that was quick. Yes please!

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Neutering the basses on an Erica
« Reply #3 on: March 16, 2010, 05:54:18 PM »

Sent!  (:) :||:
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Neutering the basses on an Erica
« Reply #4 on: March 16, 2010, 06:14:01 PM »

Thanks. But cripes. Your diagram shows that the thirds aren't back to back - in other words you can't just block off one hole with tape and knock out the push and pull thirds. How did you do it, then? Tape up each reed, somehow?

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Neutering the basses on an Erica
« Reply #5 on: March 16, 2010, 06:53:40 PM »

You can only do what on suggest on the C chord, all the others I just (and this probably isn't a great thing to do, but it works) was slot a piece of paper under the reed to stop it vibrating.
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Neutering the basses on an Erica
« Reply #6 on: March 16, 2010, 07:28:01 PM »

Many thanks for the help, Ollie. Unfortunately on the Erica I'll be doctoring none of the chords are the same push and pull. Now I understand why the process was said to be less straightforward than it might be!

And if anyone else has any pet remedies, do chime in...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Neutering the basses on an Erica
« Reply #7 on: March 16, 2010, 07:34:08 PM »

I prefer to use Scotch Magic Tape because it can be removed after a long period of time and leaves almost no sticky residue.

For the push reeds I stick the tape lengthways over the reed tongue.  For the pull reeds I lift the valve and place the tape along the full length of the slot, under the valve.  This is a bit fiddly and needs more than two hands.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Neutering the basses on an Erica
« Reply #8 on: March 16, 2010, 07:46:08 PM »

Thanks Theo. I have a roll of that stuff in my desk drawer.

I'm having a bet with myself just now on whether I'll get the job done in 10 minutes, and I have a nasty premonition that I'm going to lose.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Neutering the basses on an Erica
« Reply #9 on: March 16, 2010, 08:04:50 PM »

I'm betting against you  ;D :o
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Neutering the basses on an Erica
« Reply #10 on: March 17, 2010, 12:49:53 PM »

I had a Erika which took  2 hours, four hands, 2 pairs of pliers, a vice and a soldering iron just to get the bellows pins out... but hopefully yours will be quicker!
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Neutering the basses on an Erica
« Reply #11 on: March 17, 2010, 03:07:08 PM »

I had a Erika which took  2 hours, four hands, 2 pairs of pliers, a vice and a soldering iron just to get the bellows pins out...

Sounds just like my Erika, I used a pair of fretwire cuttters that allowed me to get a good grip underneath the pin head and they only took a couple of minutes...after 40 minutes of struggling with pliers. ::)
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Neutering the basses on an Erica
« Reply #12 on: March 17, 2010, 03:21:14 PM »

I had a Erika which took  2 hours, four hands, 2 pairs of pliers, a vice and a soldering iron just to get the bellows pins out... but hopefully yours will be quicker!

It has screws. Ask Pip Ives!

TonyRussellDavis

  • Tony Russell Davis (Black Sheep Tone/BLT)
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 192
  • Mandos'n'guitars'n'boxes'n'pipes'n'stuff.
Re: Neutering the basses on an Erica
« Reply #13 on: March 18, 2010, 07:58:25 AM »

"... I used a pair of fretwire cuttters that allowed me to get a good grip underneath the pin head....."  :o Reminds me of a pal who's mother used his purfling chisel to open a tin of paint! Tut tut!!! T.
Logged
Call if you're ever in North Yorkshire.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Neutering the basses on an Erica
« Reply #14 on: March 18, 2010, 08:36:14 AM »

's OK, they've served with distinction but are now a bit dull and not quite up to cutting flush anymore. They've now been given a second chance as bellows pin pullers. ;D
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Neutering the basses on an Erica
« Reply #15 on: March 18, 2010, 11:04:46 AM »

Challenge or opportunity?  I count myself lucky as my pocket knife has a fork-ended thingee, so blunt it doesn't mark the box when I lever the pins out.  I'm pretty sure it wouldn't do whatever it was supposed to, though...

Rob.
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Neutering the basses on an Erica
« Reply #16 on: March 19, 2010, 07:40:18 AM »

I had a Erika which took  2 hours, four hands, 2 pairs of pliers, a vice and a soldering iron just to get the bellows pins out... but hopefully yours will be quicker!


It could be worse mine work their way out all the time and having tried several methods are now held in with a fine strand from soft string, must get new pins do a propper repair at some point.
Logged
aka malodeon

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Neutering the basses on an Erica
« Reply #17 on: March 19, 2010, 08:49:43 PM »

I use a pair of  joiners  /cabinet makers pincers to pull the pins as they fit  firmly  round the pin & enable a straight pull rather than a leavering  action much the same as a dentist pulling teeth.  As far as loose pins I have  on a number of occasions inserted a sliver of wood shaved off a matchstick down the pin hole as a temporary measure & its been a very long lasting temporary measure!

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

mikesamwild

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 638
  • Melodeon, Button Accordion, Anglo Concertina
Re: Neutering the basses on an Erica
« Reply #18 on: March 19, 2010, 08:53:11 PM »

My missus wonders why her nail clippers are buggered!
Logged
Mike in Sheffield

If music be the food of love -who finds the time?
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal