Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Does anyone make a kit?  (Read 8084 times)

0 Members and 1 Guest are viewing this topic.

RoyFromGeorgia

  • Member
  • *
  • Offline Offline
  • Posts: 25
Does anyone make a kit?
« on: November 11, 2007, 10:59:06 PM »

I am interested in building a 1 row accordion.  Is it possible?  Are there any kits out there, or building instructions or parts suppliers? 

Thanks for your help.

Roy
Logged

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: Does anyone make a kit?
« Reply #1 on: November 11, 2007, 11:21:36 PM »

There is an Italian maker, Polverini, who markets a one row kit, called the "Cajbric".

However... Firstly, the kit is too expensive. A ready built Polverini one row costs only a little more. Secondly, whilst marketed as, and appearing to look as such, it is not a proper "Cajun" designed box (with the reeds mounted on a mix of horizontal/vertical blocks).

Best place for practical info on building one rows is here:-

http://launch.groups.yahoo.com/group/boxbuilder/

A regular poster is John Roger - one of the premier Cajun box builders (sadly not building at the moment, since Hurricane Katrina trashed his workshop) - who seems to be most helpfull to those seeking out the tricks of the trade, or obscure parts...

Ed J
Logged

Tit J.

  • New Starter
  • Offline Offline
  • Posts: 3
  • Laissez les bons temps rouler
    • Cajun Portal
Re: Does anyone make a kit?
« Reply #2 on: November 11, 2007, 11:23:59 PM »

Polverini offers the "Caj-Bric" kit: http://www.polverini.com/6%20cajun/caibric.html
Logged
Viele Grüße / Amicalement / Best regards
'Tit J. (Jürgen)

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Does anyone make a kit?
« Reply #3 on: November 12, 2007, 01:21:19 AM »

I am interested in building a 1 row accordion.  Is it possible?  Are there any kits out there, or building instructions or parts suppliers? 

Hi Roy,
There is a Swiss maker who makes a kit -- it's a short-scale one row (not 10 buttons -- perhaps 7, I forget).
My advice would be to contact a Cajun builder and ask for parts if that is what you want.  Elton Doucet used to make parts for a number of other builders but I'm not sure whether he is still around.
-Andy

RoyFromGeorgia

  • Member
  • *
  • Offline Offline
  • Posts: 25
Re: Does anyone make a kit?
« Reply #4 on: November 12, 2007, 05:15:04 AM »

Thank you all for the advice.  I have had a chance to check out the Box Builder forum on Yahoo, and there is some really good information there.  I looked at the Polverini kit, and it would be nice if they would put some information on their page. 
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Does anyone make a kit?
« Reply #5 on: November 19, 2007, 03:33:26 AM »

A couple years back those kits were showing up on e bay for around $800.. then it was too much

Polverini is not in the top tier of makers.. best known for making boxes for rebranders.. ie Tex Mex boxes...
Logged

dahlberg

  • Custom
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 172
  • Huvvaligen
    • Spelparkering
Re: Does anyone make a kit?
« Reply #6 on: January 18, 2012, 09:33:32 PM »

A Polverini Cajun bric kit is for sale on swedish blocket right now.
Used to cost between 600-700€, this one is for sale for 400 "or a fair bid"
I guess it`s not worth the money.........
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Does anyone make a kit?
« Reply #7 on: January 18, 2012, 11:15:57 PM »



A regular poster is John Roger - one of the premier Cajun box builders (sadly not building at the moment, since Hurricane Katrina trashed his workshop)

Ed J

A little correction, John Roger, now living in Georgia, is making accordions again.  And I agree, that forum is a pretty good place to get start.  Though not real active lately, one guy posted detailed CAD drawings of one of his.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Does anyone make a kit?
« Reply #8 on: January 18, 2012, 11:25:16 PM »


Best place for practical info on building one rows is here:-

http://launch.groups.yahoo.com/group/boxbuilder/


They seem to be having terrible problems with spam on the boxbuilder group.  Is there any sort of moderation over there?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Does anyone make a kit?
« Reply #9 on: January 18, 2012, 11:35:08 PM »

I don't really understand yahoo groups. They are ugly, unintuitive, restrictive and outdated. I don't understand why they don't all start using proper forum software like melnet, which is so much easier to use. Although I expect that fora will begin to get swallowed into social networking soon.

A forum that I occasionally glance at is MIMF, the Musical Instrument Maker's Forum. That is on an amazingly old fashioned forum software and they are currently moving to a more modern one. Although there aren't any box makers on there, there are loads of luthiers who would be able to give advice on woodwork in general.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Ziachmusi/Louise

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 400
Re: Does anyone make a kit?
« Reply #10 on: January 19, 2012, 07:22:27 AM »

Have a look here
http://www.akkordeonwerkstatt.ch/bausatz1.htm
180 schwiss francs
only five buttons but it's a start :|||:
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Does anyone make a kit?
« Reply #11 on: January 19, 2012, 08:51:52 AM »

I don't really understand yahoo groups. They are ugly, unintuitive, restrictive and outdated.

They also work by email, which I don't think is a option with SMF. I'm in several Yahoo groups which I get purely as email and that works fine for me.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Does anyone make a kit?
« Reply #12 on: January 19, 2012, 09:29:40 AM »

I don't really understand yahoo groups. They are ugly, unintuitive, restrictive and outdated. I don't understand why they don't all start using proper forum software like melnet, …
You need a little more technical knowledge to set up a forum from scratch, also you usually have to find some hosting and register a domain name.  With Yahoo none of those are required.  I just don't understand why the makers forum is so full of spam.  Well yes I do, it allows anyone to post a message, members or not.  In the old days of the internet that would work, sadly not any more.

I agree with you though that a forum is much easier to use, especially when you have a large number of different conversations going on.

Quote
… which is so much easier to use. Although I expect that fora will begin to get swallowed into social networking soon.


I hope not, the big advantage of a forum over any of the present social networks is that the owners and users of a forum have complete control over their own information.  Nobody is trying to use members personal information for advertising.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Does anyone make a kit?
« Reply #13 on: January 19, 2012, 10:07:52 AM »

I don't think a forum with a defined area of interest will be absorbed into any system that has all the appeal of listening to King George discuss the colour of his stools...  When asked why I don't do Facebook et al, I reply that I won't use anything which yields less than 1% worth reading!

Rob.

Sorry, thread drift, on topic:  perhaps some of those who have made a box on the EP course could adviseon the viability of kits? I would have thought that tuning and setting the reeds would be the difficulty as it demands skills which are not common.
« Last Edit: January 19, 2012, 10:11:13 AM by Rob2Hook »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Does anyone make a kit?
« Reply #14 on: January 19, 2012, 01:08:36 PM »

I don't really understand yahoo groups. They are ugly, unintuitive, restrictive and outdated.

They also work by email, which I don't think is a option with SMF. I'm in several Yahoo groups which I get purely as email and that works fine for me.

This is true, hadn't thought of that.

I hope not, the big advantage of a forum over any of the present social networks is that the owners and users of a forum have complete control over their own information.  Nobody is trying to use members personal information for advertising.

I didn't say that it would be a good idea, just that I could see it happening :P

Anyway, I've drifted again  :|bl
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Does anyone make a kit?
« Reply #15 on: January 19, 2012, 05:01:46 PM »

The boxbuilder group moderator is a friend of mine, he just doesn't check it very often since it's become so inactive.   Even without the discussion, the saved files should help a lot of people, at least those willing to help themselves.

And I agree with Ukebert, the luthier forums, which there are many of, are wealths of information on general and fine woodworking.  Really isn't much of that type of thing for accordion builders, lot less accordion builders than luthiers is one reason, I guess.

Getting back to the original question, there was a company at one time making kits per spec by Marc Savoy of Acadian accordions.  Anyone one ever hear of that?  Not sure if they're still out there.

I personally really can't see how the kit thing would work very well because of the amount of hand fitting required.  By the time someone made a kit that someone could put together and have a working accordion, they've done enough work that they'd have to charge a price that wouldn't make the savings worthwhile.  If someone had the time, skills, and tools to hand fit a general kit, they might as well build one  with parts.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Does anyone make a kit?
« Reply #16 on: January 19, 2012, 05:12:14 PM »

Getting back to the original question, there was a company at one time making kits per spec by Marc Savoy of Acadian accordions.  Anyone one ever hear of that?  Not sure if they're still out there.

I personally really can't see how the kit thing would work very well because of the amount of hand fitting required.  By the time someone made a kit that someone could put together and have a working accordion, they've done enough work that they'd have to charge a price that wouldn't make the savings worthwhile.  If someone had the time, skills, and tools to hand fit a general kit, they might as well build one  with parts.

I think it was Zero Sette who made the Acadian copies.

You're quite right about the economics of making a kit. It just don't add up.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Does anyone make a kit?
« Reply #17 on: January 19, 2012, 10:45:15 PM »

Roy, I just noticed where you are from. John Roger, mentioned earlier, lives in Elijay, Ga, maybe close to you.  Very nice guy and very helpful.  I think he's done apprenticeships.  He has a website if you search him.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal