Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Old Metal Parts Lubrication  (Read 3693 times)

0 Members and 1 Guest are viewing this topic.

suesqueezer

  • Member
  • *
  • Offline Offline
  • Posts: 16
  • Piana accordion player now attempting all buttons!
Old Metal Parts Lubrication
« on: March 18, 2008, 03:47:16 AM »

Hi folks,

I know when I took my piano cordions in for service, I had the bass machines "lubricated". Now, does anyone know what product can be used to do this to old (and rust is evident) metal levers/pivots/springs on an old Hohner treble side? (I know it wasn't an oil product cuz that would attract dirt and other mung.)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Metal Parts Lubrication
« Reply #1 on: March 18, 2008, 08:35:35 AM »

First thing is to remove all the rust and other dirt from the area where the levers pivot. To do that effectively you should remove the mechanism form the instrument.

IMPORTANT:  before removing the screws that hold the treble mechanism in place its essential that you unhook all the springs. 

If you don't do this the spring tension will drag the screws out of the holes as you turn them, enlarging the holes so the screws won't grip when you re-assemble.  You will have to release the springs anyway if you want to withdraw the axle rod.  Once the mechanism is out of the box screw it down onto a piece of scrap wood, this makes it easier to hold onto while you work.  Now slowly pull the axle rod out and as each lever is released lay it out in order.  Once everything is apart its a simple job with a soft wire brush and some alcohol or other solvent to clean up all the parts, especially in the area of the axle.   After re-assembling the mechanism you I usually lubricate with a mixture of WD40 and powdered graphite.  I apply this mix with a fine paintbrush.  You can use WD40 on its own, but spray some into a jar and then apply with the fine brush.  WD40 includes a solvent which evaporates leaving a waxy residue which lubricates, but does not trap dust very much.

While you have the mechanism out its probably worth replacing the leather pallet facing.  A felt/leather composite is quieter than plain leather.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Allan Smith

  • Member
  • *
  • Offline Offline
  • Posts: 14
  • I used to be Ringsmith, but I'm better now !!
    • Plum Jerkum Border Morris
Re: Old Metal Parts Lubrication
« Reply #2 on: March 18, 2008, 12:15:28 PM »

Just a thought - When I start something finicky like this I've developed a habit of taking lots of detailed digital pictures as I go along.

If I don't have to refer to them - no harm done

If I get stopped half way through the operation & have forgotten how it all works when I get back to it - much less frustration, grief & wondering where the heck that little bit fits ;D

Have fun

Smith

suesqueezer

  • Member
  • *
  • Offline Offline
  • Posts: 16
  • Piana accordion player now attempting all buttons!
Re: Old Metal Parts Lubrication
« Reply #3 on: March 19, 2008, 04:06:36 AM »

Just a thought - When I start something finicky like this I've developed a habit of taking lots of detailed digital pictures as I go along.

Wonderful tip, Alan, and thanks again for the info, Theo. Another fussy project for me to tackle! And I thought it was going to be some "magic" spray, but hey, it's fun taking things apart - it's puttin em back together part I need to develop!
Logged

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Old Metal Parts Lubrication
« Reply #4 on: March 20, 2008, 02:57:32 PM »

I really ought to do this to one of my Trichords, and some if not all of the pallets need re-facing too.  Just wondering, what's the best way to get the old felt/leather off?  Steam?  Scalpel?  Highly trained moths...?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Metal Parts Lubrication
« Reply #5 on: March 20, 2008, 04:30:48 PM »

Moths make the neatest job, but they can be slow.

Failing that a stanley knife will start the job, but you may have to use sandpaper to get a smooth surface.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Old Metal Parts Lubrication
« Reply #6 on: March 20, 2008, 05:05:29 PM »

Thanks.  I should have searched better, I now realise you answered this same question here http://forum.melodeon.net/index.php?topic=243.msg1774#msg1774, sorry for the trouble!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Metal Parts Lubrication
« Reply #7 on: March 20, 2008, 05:24:33 PM »

Ah, but the info on moths was a valuable new insight.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal