Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: plastic paint to strengthen paper bellows joints and gussets  (Read 13402 times)

0 Members and 1 Guest are viewing this topic.

HallelujahAl

  • Guest
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #20 on: May 02, 2010, 06:20:37 PM »

Yes, I know the guys at the Identity store in Matlock (a 20 min drive from my house). I recommend them, they also are able to offer items from the Tandy Leather Catalogue. I get all my leather weld glue from them etc. Tell 'em Captain Al sent ya - and you never know ;)

Actually, they've been more than helpful everytime I've ever had need to visit them. I bought a great load of leather that I use as gussetting material for my concertina repairs from them.
AL
Logged

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #21 on: May 02, 2010, 08:56:03 PM »

Having posted about my recent Old Paolo and it's bellows problem I then spotted this very helpful thread.   Should have been more thorough in my searches of the site before I posted, anyhoo  I'm going to try the Bookbinding tape on the splitting bellows but the real challenge is the gussets as mentioned above which have some pin holes in them.  Is there a way to patch or replace these.  I'm not looking to make these bellows industrial strength just want to play the little thing on occasion and keep the original bellows.
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #22 on: May 02, 2010, 10:06:08 PM »

It is possible to patch gussets by gluing thin soft leather on the inside of the gusset
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #23 on: May 03, 2010, 12:10:13 AM »

It is possible to patch gussets by gluing thin soft leather on the inside of the gusset


 That's a good fix.....you can order some thin diamond shaped gussets from BBox and cut out a piece large enough to cover the hole. Use "Loctite" brand flexible adhesive (good for vinyl, fabric and leather) and glue patch from the inside. Patching in the center of the bellows is a bit tricky, but folds near the end aren't too bad. If your original gussets are getting crisp and crumbly, then it might not be worth patching in this manner.
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #24 on: May 03, 2010, 01:59:53 AM »

Many thanks for that.

The link seems to have changed - that one took me to a search page.

I guess their web address has changed slightly - a quick Google led to http://www.theidentitystore.co.uk/.  Definitely the right place, and lots of useful stuff there.

Thanks again,

Tony.
quite right - sorry .. my monocle dropped out and misread store for shop on the compliments slip... but do ring em! Not all is on the site as far as the offcuts and bits and pieces are concerned.
Logged

Tony M

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #25 on: August 26, 2010, 01:09:47 PM »

Having parked my leaky East German concertina for a few months, I may have a workable solution that could be useful to others:

I had tried diluted PVA, to some benefit, as already noted - however, other circumstances brought something else to my attention.  Lurking in my shed was a bottle of Outbound seam sealer, for waterproofing tent seams - must have had it for years.  Googling this didn't find any new sources, but Gelert do something that looks to be the same - variable from about £3 to £6, according to source and postage (Amazon and eBay come up in a search).

This stuff is designed to be applied to tent seams, using a "roll-on" tip on the bottle - when dry, you get a thin layer of soft, fairly colourless plastic that stick / penetrates adequately to stop rain getting in through the stitching holes.

The original stuff I had noted that it contained isopropyl alcohol and toluene, so I thought I'd experiment.  It didn't dissolve in IPA, and in the absence of toluene (which I seem to recall is nasty stuff), I tried ordinary cellulose thinners - and the goop in the bottle dissolved readily to give a fairly thin liquid.  Painted this onto the offending defective cloth binding (inside and out) - one coat each side, and I've got a vast improvement in air-tightness.

Obviously, this is not a suitable approach for a proper restoration, I have no idea how long it might last, and it might give rise to other problems in the future - but, for those who want to improve the playability of something that's not worth a "proper" repair, it does seem to be an option.

Suitably thinned, it may also be capable of penetrating paper or thin card, plasticising it a bit and improving strength - but I haven't tried that.

Comments welcome, as ever.

Tony
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #26 on: August 26, 2010, 04:23:44 PM »

Having parked my leaky East German concertina for a few months, I may have a workable solution that could be useful to others:

Comments welcome, as ever.

Tony
More! More!
Following start of this thread I secured the yellow plastic paint.  
I  painted some bottom seams last week which showed part straight line 'cracking' in the 'crack' of the fold when bellows pulled out. (Colour almost matches)

I need to put another coat on the test cracks as 'blackness' of cracks showing through new paint still.
two BUTS
but1. The gussets I now (stupidly) realise are not painted but their original cardboard colour. So I do not know whether to try painting them yellow (bottom back,  out of sight for test) or see if I can find an appropriate plastic  paint cardboard colour.

but2. I kept blobbing the damn yellow paint on the black binding,as I held the bellows open with other hand. - I suppose I should be putting some masking tape along the binding...
or is there a quicker approach???

3.Fortunately it wipes off easily with thumb and finger without leaving too much of a trace on the black (maybe I have to paint that later anyway though masking tape question still applies to keep black off the yellow). Or I could use my black dye on binding where looking rough and then spray clear car plastic silicone 'shine-up' spray on the black and that won't be a problem if it goes on the yellow.....hmmmmm!?

4.I used to use a trick of painting a line by holding a plastic ruler in place over  the not-to-be-painted part........though often it leaked -- using edge of thin cardboard worked too and easier to throw away wet bits?? I might try cutting some on paper guillotine to get a sharp edge.

5.My sister is an afficionado of the little square sponge paint applicators for door jambs and window frame to glass wood sections and  etc, but I never seem to get a good result (perhaps I need I need sing and play a Formby Uke at same time to get the rythm).

6.After painting a fold I then popped a variety of old biros in the crack to keep the two sides of the fold away from each other while they dry.  I am reminded that when putting new sealant around the bath you are supposed to stand in it so sealant fully fills the gap and folds in on itself when you get out and bath 'lifts' up. Coz without doing that, when you use bath after sealant dried, you will physically pull down the bath away from the new sealant and may open up a gap.......

If i paint all the folds I  calc I have 9 foot length x 2 inches depth of bellows to do........ :Ph :Ph

Taken photos of pilot process thus far but not ready to put up yet.

I have been playing the box a little in the interim but forgot to look till your post to see if any new/re-emerging splits in newly painted section; test area looks ok thusfar.

Finally intrigued at what  leak-evaluation-technique you used to notice big improvement post canvas-proofer?

7. I think my real problem is not the dilettante-leaking fold work, but a gale blowing through my outer row; coz when hit a button there it plays fine but vast amounts of air escape, audibly.. The Grand Troll heard it too at Wem and we wondered whether the (ok=looking) pads are perhaps sitting just too thin for the job they need to do -Maybe I will record some leak sound (it's that loud!) when I sort out the photos. :Ph :Ph    That is a C Row so perhaps it could be some airheads trying to escape to follow the Freebreather Leader in his C campaign.........
« Last Edit: August 26, 2010, 04:31:29 PM by Kautilya »
Logged

Tony M

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #27 on: August 27, 2010, 04:27:58 PM »

Glad to see your experiments are having some success!

Anything on the bellows seems to involve a lot of work - I looked quite carefully at what would be involved if I tried relining with leather (a proper job!), and there seemed an awful lot of opportunity to get things wrong, which was (partly) what put me off trying that as a first step.  I considered making or buying new bellows, as well - repair / replacement remain options, but I'd rather avoid either.

As I said before, the instrument was playable before the latest round of "improvements", but only just - and it needed a lot of air button use to keep a tune going, so it was clear I needed to either do something about it or sell it on and call it a day.  I did a check for leaks before the latest "fix" (dusting of talcum powder round the outside of the bellows, then squeeze and see where the leaks were) - I had over 50 individual leaks!  If your bellows are as bad as these were (and remember even this was significantly better than when I got the thing) it's quite easy to measure improvement - you just notice how much less you need the air button!

With the bellows compressed and the concertina suspended vertically from one strap, it now takes 10 seconds or so for the leaks to allow the bellows to fully extend - from recollection, that's two to three times as long as it was before the latest "treatment".  (This may not be a good thing to do, btw:  the straps weren't terribly strong, and I now need to make a new one!)

When I've worked on the bellows, I've used two sticks (one each side of the instrument), and with some string and small wire hooks (through the holes for the bellows pins) held the bellows in an extended position (not too tight).  The sticks can go either inside the bellows or outside, according to where you want to work, and you can leave things to dry quite happily.

One thing I should have pointed out about my latest method - it stinks!  The fumes from the thinners are seriously not good for you, and it should really be done with LOTS of ventilation.  Also, several days on, the concertina still fills the room with the smell of thinners - it's clearly going to take a while to go away!

Keep up the good work!

Tony
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #28 on: August 27, 2010, 06:31:41 PM »

Tony
Mine's longer than yours - 13 to 15 seconds. That said i do have too much air button demand if I pull in left right and hold all the buttons down (for haunting slow songs..........) but praps not as bad as yours was.

Emilio Allodi showed me the other week a ''tight' begallows - you could not push it in at all.

I may have to advertise for an expert hangman on Melnt for accurate drop to weight to knot ratio.  Le Jig  Stepdance de Pierrepoint springs to mind.
.
Like the string and sticks - will bear in mind.

Talc -clever - but, hmm -- what about cleaning it off black areas after?

I was tinkering again with idea of trying dhoop (there were lots of no noes last time I suggested it on Cnet, in terms of 'bits' of smoke getting in the reeds, but I don't see that....I drop ash all the time on my machine from fag end as I sing along to my own accompaniment a la azzplayer and my page turner smokes and is a player too:
http://tinyurl.com/33yqmey

The dhoop would be placed under bottom of one open end (leaving top closed). It burns very slowly and cold after it gets started and the cone ones sit nicely (dont use joss stick) leaving hands free to spot leaks (if it works!) Or a mosquito coil with stand - you can break bits off the coil and light them.
http://www.roamingfox.co.uk/Mosquito-Coils-pr-16414.html?gclid=CNLeup-X2qMCFQX92AodEHFg9w

 http://www.theincensestore.com/online_store/chamundeswari_dhoop_sticks_24_sticks_loban_2.cfm   

Have been using talc to track where leak starts around my diesel fuel pump on the car and it is v effective. But does not solve the drip!!

Has your playing improved after each smelling session? - I often wondered about using a felt tip pen at a session rather than a Vick's nasal inhaler - to get that extra craic as the evening wears on (http://www.pharmacyfirst.co.uk/medicines/vicks-inhaler-nasal-/prod_1475.html)

Till later

 :|glug :|glug



Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #29 on: August 29, 2010, 10:36:14 PM »

Paint - type.
Shots showing typical cracks in old 'paint' of some of the folds (and different colour of the gusset)

Painted shot (which need another coat and cleaning up the lines to binding).
(sorry two of the same painted and can't delete it.....)

Keep apart pens! in next post
« Last Edit: August 29, 2010, 10:43:07 PM by Kautilya »
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #31 on: August 29, 2010, 10:59:22 PM »

I'm not sure why you are going to all this trouble.  From the pictures it seems that the cracks you are dealing with are just in the yellow paper which is normally only a decorative component.  Maybe there is more that the picture can't show of course, but I think I preferred the visible cracks to the somewhat streaked paint! 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: plastic paint to strengthen paper bellows joints and gussets
« Reply #32 on: August 29, 2010, 11:48:13 PM »

I'm not sure why you are going to all this trouble.  From the pictures it seems that the cracks you are dealing with are just in the yellow paper which is normally only a decorative component.  Maybe there is more that the picture can't show of course, but I think I preferred the visible cracks to the somewhat streaked paint! 
For fun!
My mate needs a whitewall tyre for his 1998 Roller for MOT.  new one tyre is 220 quid delivered.
He used to spray Rollers at Park Royal plant, so I told him to paint a white  rim around a plain tyre (new tyre 60 quid) coz  no one will know the difference. "I will!" he said........... But I think I am going to win him round....

There is more than the picture shows -- there's yellow gold in them thar cracks. 

Streaked? - quite right - that's my next cleanup challenge. The test at the moment is about reinforcement and filling in the cracks to try flexibility.

 The final finish, if I repaint the whole bellows, will be done Pristine Chapel style, under the supervision (free) of my jobbing painter mate Michele  Angelo from the Vatican Sopranis! ( (flodA is not free)
It will also play a helluva faster with new yellow striping.

Point is, the yellow on the upper bellows and front and back are okayish but part stained, some glue showing on  repaired 'paper' corners next to metal surrounds etc etc and are ready for a good repaint. The pics show the underneath which is still quite nice).

To redo the "paper" covering (even if it is decorative,  and tho I may be wrong..... I think it is structural.) on 9 foot of bellows (unlike popping papers on a tina) would be a really major exercise as on this box it is held under the binding, so all that would have to be redone too - I'll ask The Box Place to quote professional price and let you know! >:E >:E

That said, you know I am always ready to learn from the Master Up There...  ;) ;)
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal