Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning scratching question...  (Read 4993 times)

0 Members and 1 Guest are viewing this topic.

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Tuning scratching question...
« on: April 26, 2010, 09:04:08 PM »

hi all

so both my mentors taught me to scratch and file at the tip and at the bottom of the reed
and sometimes in the middle for finer tuning
that's what I've been doing for 2 years now

a client recently told me he'd been told this is completely wrong
that scratching the bottom of the reed weakens it
and one should only touch the middle part (and tip I guess)

I'd like to hear what all you tuners out there have to say on that subject

oh and also...
"scratcher & files versus Dremel" is another one
again, both my mentors use Dremels
(though one insist on the MiniMite or an equivalent battery powered one
softer than the electric one)

how do you feel about that one?

thanks in advance for all your feedback

Melodona


 
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Tuning scratching question...
« Reply #1 on: April 27, 2010, 12:15:51 AM »

I wouldn't ever put a power tool near reeds. It's really so little work to scrape with a sharp file so I will stick with that, much more room for going over the top with electrics!

If you look at either Hohners and Italian made boxes they can all be seen to have longitudinal scratches from the middle of the reed to the rivet. I'm sure if that were to significantly weaken the reed a) companies wouldn't do it b) we would see loads more broken reeds on old Hohners.

As for customers thinking they know best...
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning scratching question...
« Reply #2 on: April 27, 2010, 08:56:09 AM »

a client recently told me he'd been told this is completely wrong
I listen carefully to my clients, but if they have strong opinions like this I'll ask them what evidence it is based on
Quote
that scratching the bottom of the reed weakens it
and one should only touch the middle part (and tip I guess)

I did study some material science a long time ago and its is true that surface defects do lead to fracture in highly stressed objects.  So yes it is true that scratching near the base if the reed weakens it, but the same is equally true for scratching the reed anywhere along the region that bends while the reed is vibration.  In ideal circumstances we would only use a method which leaves a perfectly smooth surface (which is possible with concertina reeds, or accordion reeds that are not mounted on a reedblock)  but for final tuning it is usually not possible.

Anyway practical experience shows that for most players breaking reeds is not a problem.   The boxes where reeds break most commonly among my clients is those who play for Morris where they are usually not amplified and feel the need to play as loud as possible.
Quote
I'd like to hear what all you tuners out there have to say on that subject

oh and also...
"scratcher & files versus Dremel" is another one
again, both my mentors use Dremels
(though one insist on the MiniMite or an equivalent battery powered one
softer than the electric one)

I dislike powered grinding tools because:
hand tools give more control
hand tools allow you to feel how much metal is being removed
power tools are noisy
For me its quicker to use hand tools
power tools leave abrasive dust
power tools require greater care to prevent the grinder from skipping sideways and damaging the surrounding area


If you look at either Hohners and Italian made boxes they can all be seen to have longitudinal scratches from the middle of the reed to the rivet. I'm sure if that were to significantly weaken the reed a) companies wouldn't do it b) we would see loads more broken reeds on old Hohners.

Hohner reeds frequently also have evidence that a grinder has been used prior to the very final tuning, and this is the are where Hohner reeds break most often.

I keep all the broken reeds I remove, and I disagree with the suggestion that Hohner reeds don't break often.   In my experience they are by far the most prone to breaking.   There may be other reasons for this though.   I believe that Hohner reeds may use a thinner profile than equivalent Italian reeds,  which may explain their tendency to break, and may be connected with the loud volume of many Hohner boxes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

HallelujahAl

  • Guest
Re: Tuning scratching question...
« Reply #3 on: April 27, 2010, 09:17:43 AM »

I don't let my dremel go anywhere near my reeds - unless I use it with a very soft (i.e. rubber) polishing tip. And that's just to help me clean up dirty old reeds.

Your customer is right in the physics of the matter - however I don't think it works out like that in practice. Having said that I do not flatten a reed by going too close to the rivet end - I try and stay as 'high' as possible because (and this is purely subjective) I think I get a nicer, quicker, sounding reed and I'm able to maintain the best reed profile that way.

Finally, I really don't like reed scratching - I prefer wherever possible to file. But then that's because most of my tuning experience has come from tuning vintage concertinas.
AL
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Tuning scratching question...
« Reply #4 on: April 27, 2010, 10:05:20 AM »

Theo: when you consider that there are 62 odd reeds in a 21 button Hohner, a single broken reed is about a 1.6% failure rate. Ignoring external issues such as rust and assuming that the breakage is just down to metal fatigue caused by movement, this is obviously acceptable to Hohner, and I would expect to see more failures if it really caused a significant problem.

I wasn't aware that any of the marks on Hohner reeds looked like grinder trails, are we talking more recent boxes here, or have I just been unobservant?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning scratching question...
« Reply #5 on: April 27, 2010, 11:34:45 AM »

Theo: when you consider that there are 62 odd reeds in a 21 button Hohner, a single broken reed is about a 1.6% failure rate.
Can't argue with your maths, but I was talking about Hohner compared with Italian makes.  Its not unusual for me to see Hohners that have half a dozen broken reeds.  But I've never seen more than one or two broken reeds in an Italian box.  I know that is not a direct comparison but...
Quote

I wasn't aware that any of the marks on Hohner reeds looked like grinder trails, are we talking more recent boxes here, or have I just been unobservant?

This sort of thing is very common, but not on every reed
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Tuning scratching question...
« Reply #6 on: April 27, 2010, 02:20:42 PM »

a client recently told me he'd been told this is completely wrong
I listen carefully to my clients, but if they have strong opinions like this I'll ask them what evidence it is based on

The client didn't have a strong opinion actually. He was relaying information given to him by a tuner of 20 years' experience who saw the work that had been done on the client's accordion. The tuner, who did have a strong opinion on the matter, said that the problem was twofold - weakening, and the effect on the set of the reeds, which tend to be pushed down too far (and were in his opinion). He said that this was liable to cause the reeds to block (fail to sound) when strong bellows pressure was applied, and he then proceeded to demonstrate that this was indeed happening on the client's instrument. In his opinion the set of all the reeds needed checking, adjusting if necessary, which would then mean the tuning had to be readjusted.

Since receiving this opinion, quite by coincidence, the client heard a very similar opinion from another experienced tuner when he (the client) sent a photo of the reedblocks and reeds of another (old) accordion for a possible trade. This second tuner didn't mention the blocking problem, but did talk about the weakening and the pushing-down effect. All this without the client saying anything about the subject.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Tuning scratching question...
« Reply #7 on: April 27, 2010, 06:42:52 PM »


Hohner reeds frequently also have evidence that a grinder has been used prior to the very final tuning, and this is the are where Hohner reeds break most often.


Yes, even my 1920's-30's Hohner has some quite profound cylindrical grinding marks on them...they are certainly not the work of a hand-held device, but appear more like a jig mounted machine, probably grinding the reeds into filing range for tuning.
Logged

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Re: Tuning scratching question...
« Reply #8 on: April 27, 2010, 10:34:14 PM »

thanks for the clarification Steve

and thank you all for sharing
definitely good food for thoughts
and an inspiration to research more...

Melodona
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Tuning scratching question...
« Reply #9 on: April 28, 2010, 12:10:44 AM »

I hadn't picked up on those marks being machine made, but the way the 'grain' of the scratches is across the reed, I can see now it looks like it was done with a rotary tool of some sort!
Logged

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Tuning scratching question...
« Reply #10 on: April 28, 2010, 02:45:25 AM »

The grinding marks observed on the Hohner reeds are made by an industrial high speed grinder (similar to a dremel) that is fixed to an arm about 46cm (18") long and mounted to a ball joint at the opposite end. This mounting systems allows for precise grinding for the first tuning of the assembled reed plate. This systems keeps the grinding wheel both in track with the reed tongue lengthwise, and keeps the grinding wheel level with the reed tongue. For the most part this is effective, however it depends on the technician that is tuning. One can distribute the grinding over a moderate amount of space, or concentrate on one point. The latter of which is a bad practice that will cause premature failure. There are methods that are better for the reed tongue, but since they take more time, they cost more and are therefore not practical for a high production reeds produced in the tens of thousands.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: Tuning scratching question...
« Reply #11 on: April 28, 2010, 08:24:05 PM »

I would suggest the main problem with grinding reeds is the heat input to the reed.  Grinding abuse is a very common cause of fatigue crack initiation in high strength steels - probably much more of a problem than longitudinal scratches.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning scratching question...
« Reply #12 on: April 28, 2010, 08:32:55 PM »

Agreed,  in some very cheap unbranded boxes I've seen blued by heating next to grinding marks.  Needles to say the reeds sounded terrible even before they broke!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Tuning scratching question...
« Reply #13 on: April 28, 2010, 10:02:26 PM »

Since the air gap around the perimeter of the reed is important to the sound longitudinal scratches would seem wise as they don't have any impact on the edges. I can imagine transverse filing or grinding which effects the general edge shape could impact the tone, let alone create burrs etc which longitudinal scratching wouldn't.
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Tuning scratching question...
« Reply #14 on: April 29, 2010, 12:35:29 AM »

Since the air gap around the perimeter of the reed is important to the sound longitudinal scratches would seem wise as they don't have any impact on the edges. I can imagine transverse filing or grinding which effects the general edge shape could impact the tone, let alone create burrs etc which longitudinal scratching wouldn't.

I have used a dremel with a small conical grindstone point to remove metal from the center of the end of a reed for tuning and it seems very precise and controllable and does not heat the reed substantially.  My thinking on this is that, as mentioned above, much filing across the tip could affect the profile of the reed tip if not done very carefully and, even more likely, leave a slight burr which would be a problem. Removing metal with a dremel from the center of the tip avoids this problem.  I use a sandpaper type file for fine tuning which I think is also much less likely to cause these problems.  I have seen the statement on other accordion blogs that using a dremel tool on a reed is gross incompetence but to me it seems like a nice precision tool that works well especially on the heavier reeds when you need to remove a fair amount of metal.
Logged

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Re: Tuning scratching question...
« Reply #15 on: May 08, 2010, 06:01:47 PM »

thanks all again

how about that trick of using a shim made of copper
which I'm told will absorb the heat instead of the reed?

anyone's heard of that method?
does it really work?

Melodona
Logged

johnnoe

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Tuning scratching question...
« Reply #16 on: August 16, 2012, 10:12:50 PM »

Hi All, I live in Australia, have an old accordion, want to do some repairs & tuning as a hobby, where can I buy reeds & valve material etc. also need bellows for a workbench, and tuning meter. Can I use any plastic material for valves, is leather better, Help
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning scratching question...
« Reply #17 on: August 16, 2012, 10:46:48 PM »

Don't even think about making valves from leather or plastic, you will spend ages on it and get a guaranteed bad result.  Buy the proper valves and you can be confident that they will work well and will let the reeds perform as well as they can.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

johnnoe

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Tuning scratching question...
« Reply #18 on: August 17, 2012, 04:03:09 AM »

OK ,thank you THEO, appreciate all as a learner.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal