Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Self-build experiment and questions  (Read 8616 times)

0 Members and 1 Guest are viewing this topic.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Self-build experiment and questions
« Reply #20 on: May 18, 2010, 05:49:27 PM »

Remember to glue your veneer on both sides of whatever you decide to put in between, otherwise you may be in for a nasty surprise. Gluing gets a lot easier if you have a shop press (I find the inexpensive Chinese manually operated hydraulic presses very useful).
« Last Edit: May 18, 2010, 05:53:05 PM by diatonix »
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Self-build experiment and questions
« Reply #21 on: May 19, 2010, 01:49:55 AM »

Purpleheart... also known as nazarena in So America is used for timber framing, railroad ties, bridges and truck beds.
My personal opinon is that a little goes a long way. I do not care for it at all and don't use it..maybe if I was building a pier. Hideous would be my version of being nice as a description for Purple heart.. yechhh.

Birds eye maple.. another wood that goes a long way. A little is enough. Guitar  necks, backs and sides, .. it's ok

Spalt.. spalt is a fungus growth that leads to rot and decay. Catch it at the right time and it looks good. I llike it in small bits.

Solid wood as opposed to ply in instrument use.
In resonator guitars where the sound production comes form a metal cone excited by string vibration.. there is an age old debate
of the plywood builders vs the solid wood builders.  Some consider the guitar body a speaker cabinet and use ply, others insist the wood adds to the package and use solid wood.  Note that some use both and there is an "upcharge" for solid wood.

I can see this same debate applied to accordeon construction.  I agree there is probably more to be had from reed block and reed quality and construction technique than form chassis material..
One of the differences between similar models of Saltarelle and Serenellini uised to be the use of solid or ply,not sure if this still apllies.

Padauk. I like it and use it. The best used to be from the Andaman Islands but long gone..denser, redder.
Spanish guitar makers use it as an in between cypress and rosewood for backs and sides, usually for flamenco guitars. They call it "coral"

Alder at $5 a board foot.. Around here it's $2.50 a board foot and I cut my own off my property..I have about 500 board feet.
One of these days I'll get around to sending some to Rees...
A few years back Alder was considered a nuisance or weed wood and loggers burned it.  Marketing raised the bdesireability and price
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Self-build experiment and questions
« Reply #22 on: May 19, 2010, 04:23:13 AM »

I'll probably be buying the lumber from MacBeath's in Salt Lake. I don't have too much of a choice if I want to choose the pieces myself. Any additional cost could be because they surface two sides, which I don't really need because I'll be milling it further for my own purposes but yeah... $2.50 would be nice. Where do you live?  (:)  Would prefer quartered purpleheart but may have to pay extra for a custom cut.

I don't care for the appearance of purpleheart when it isn't finished with a UV blocker because it gets too brown. Pier, ha.. yes that's about right.  ;D But it can keep its purple color for years to come if finished correctly and it can be restored by removing the finish and refinishing. I don't think there's anything else like it. I'm not real keen on bird's eye maple but love the flamed and quilted stuff. Wish I could find some tamo or quilted ash around here or on the net at a decent price. That's another very hard wood that seems to find its way into a lot of projects.

Later on I'll try to post some .pdf's of the CAD sketches I'm doing.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Self-build experiment and questions
« Reply #23 on: May 19, 2010, 04:29:59 AM »

This chair is a good example of why I like purpleheart. If I could find a piece with even a little random curling in it, I'd be set!

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Self-build experiment and questions
« Reply #24 on: May 19, 2010, 04:50:27 AM »

That is just  soooooooooooooooooooooooooooooo   special.
Wonder what it's like under a black light ?
That is the very reason I don't care for  purpleheart.
Kinda like, how much Liberace can you take ( if any at all)
Want some purplelheart, plenty  locally, glad to cut and ship for you. Quarter sawn.. I'll check it out.
Glad you like it.

I am in the state of Jefferson (look it up.. yes it's real)
West of you a couple states.
You want some alder... give me the sizes
And yes Rees, I have some saved for you... give me the finished sizes again..


Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Self-build experiment and questions
« Reply #25 on: May 19, 2010, 04:56:10 AM »

Quote
Kinda like, how much Liberace can you take ( if any at all)

My grandfather, a good fellow if a little misled or outmoded in his thinking... loved Liberace. But alas he was of the old school and couldn't accept Lib's sexuality, insisting that he just had good taste in fine clothing and knew how to dress. Grandpa was fond of white patent leather shoes and white leisure suits with gold buckles so who knows.

A little later on I might take you up on the lumber.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Self-build experiment and questions
« Reply #26 on: May 19, 2010, 02:57:34 PM »

Anytime... I have plenty... enough that all you would need do is pay the shipping,  and that would be cheap if I dimension it for you.
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Self-build experiment and questions
« Reply #27 on: May 20, 2010, 07:33:12 PM »

[...] using bird's eye maple as anything other than a thin veneer would be structural suicide since it's completely full of knots and burrs, but as a surface veneer it looks fantastic.

Accordéons Mélodie in Montmagny, QC have been using birdseye as solid wood (not veneer) for at least a decade.  I'm sure that they need to be very selective regarding particular pieces, but I never heard about a "structural suicide" of a Mélodie.
Also, I have several nice birdseye boards at home, none of which are full of knots and burrs, unless that is what you are calling the "birdseyes" themselves.  (I agree with Jeff, this wood should be used sparingly... )  The only issue I've ever faced with birdseye is that if one is not careful, while thicknessing the boards in a machine some of the "eyes" might pop out.  This affects surface quality but not the overall structure, and the problem is easily solved with a properly tuned handplane.  I've seen some very punky pieces of birdseye but would simply not use them for a piece requiring structure -- there are plenty of boards here (in the Green Mountains) that are clear of knots/burrs/etc.
Ian, since you described birdseye maple in this way (full of knots and burrs) I seriously wonder if we're hoarding most of the good stuff in Quebec and Vermont?

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Self-build experiment and questions
« Reply #28 on: May 20, 2010, 10:55:15 PM »

In the UK I think the equivalent to Birdseye (or at least the one I would use) is a nice piece of figured or fiddleback sycamore, same family as the maple and usually knot free. I've a couple of six foot boards in the workshop and they're defect free and not too hard to work.

Steve
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Self-build experiment and questions
« Reply #29 on: May 28, 2010, 06:51:52 PM »

I found a company that sells figured cherry lumber by mail order. I called him on the telephone to talk about some things not mentioned on the website and liked what I heard so I'm switching to cherry. He's putting more lots up next week, too.  :||:  :||:

http://www.curlymaple.com/pvtstkcherry.shtml

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Self-build experiment and questions
« Reply #30 on: May 30, 2010, 09:23:58 PM »

Another way to deal with  thicknessing birdseye is to use a drum sander.

No chip-out
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Self-build experiment and questions
« Reply #31 on: May 30, 2010, 10:02:10 PM »

I found a company that sells figured cherry lumber by mail order. I called him on the telephone to talk about some things not mentioned on the website and liked what I heard so I'm switching to cherry.

If you fret the grill out of cherry experiment with blade sizes and speeds first as it (like most fruit woods) is prone to burning and it takes forever to sand the burn marks out.  For a grill (up to 6mm depth) I'd use a Number 3 blade and turn the speed down.

Steve

PS you should try cutting plum  (:)
Logged

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Self-build experiment and questions
« Reply #32 on: June 10, 2010, 05:05:27 AM »

The surface area of an accordion is rather small, regardless of what wood you pick you will want to make sure that the pattern in the wood is small enough to be captured by the accordion.
One little tip on the sound board is to bevel the perimeter slightly so when you glue it to the frame it will be easy to assemble. Nothing worse than going to assemble something that went together great with a dry fit only to have the wood expand when the glue is applied.
Can't wait to see some pictures!
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Self-build experiment and questions
« Reply #33 on: December 05, 2010, 11:14:20 PM »

I'm curious about how this project came out. Any photos? New thread?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Self-build experiment and questions
« Reply #34 on: December 06, 2010, 12:00:27 AM »

I'm curious about how this project came out. Any photos? New thread?

Nada. I was upset about it.

The program took on too many enrollments this semester and did not increase the number of instructors. As a result, the shop is crowded and the former walk-in policy regarding lab work was changed citing a safety issue. Now, no work may be done outside of class time. I got the go from the instructors, but having only 1.5 hours a day, four days a week, an additional project on top of the two required for the class made it, well, impossible.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Self-build experiment and questions
« Reply #35 on: December 06, 2010, 12:13:55 AM »

I"m very sorry to hear that. Maybe later. Where are you located?

Ed
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Self-build experiment and questions
« Reply #36 on: December 06, 2010, 04:32:02 AM »

I'm in Utah (Valley). In the meantime there are some smaller projects that I can do from home, and get moving on the pile of broken accordions around here. The wife will like that!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Self-build experiment and questions
« Reply #37 on: December 07, 2010, 06:27:48 AM »

In the UK I think the equivalent to Birdseye (or at least the one I would use) is a nice piece of figured or fiddleback sycamore, same family as the maple and usually knot free.

Not quite - "fiddleback" maple or sycamore is quarter-sawn and the "rippled" pattern results from the play of light on the medullary rays. "Birdseye" is normally slab-sawn and the pattern of dots & swirls is a a result of irregular growth.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal