Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Attaching Pokerwork strap clips  (Read 3193 times)

0 Members and 1 Guest are viewing this topic.

brianleach

  • Member
  • *
  • Offline Offline
  • Posts: 43
Attaching Pokerwork strap clips
« on: March 25, 2008, 09:34:11 AM »

Further to my post about purchasing these clips which I will do shortly I wondered if it was possible for a complete amateur to attach them or whether I am likely to do any costly or permanent damage to my box.

If so can this be done merely by screwing on from the outside or is it more tricky than that.

Any hints or tips would be most welcome.

Many thanks,

Brian Leach
Logged

BruceHenderson

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 262
Re: Attaching Pokerwork strap clips
« Reply #1 on: March 25, 2008, 01:52:35 PM »

Further to my post about purchasing these clips which I will do shortly I wondered if it was possible for a complete amateur to attach them or whether I am likely to do any costly or permanent damage to my box.

If so can this be done merely by screwing on from the outside or is it more tricky than that.

Any hints or tips would be most welcome. 

    I was faced with the same issue on my first melodeon.  A melodeon-playing friend had a pair of strap brackets that he could spare.  He showed me how the ones that he used fit on his melodeon, noted that it *might* be possible to run screws into internal working parts if one weren't careful.  He showed me the "solid" parts of the melodeon frame and we measured the distance that the foot of the bracket fit away from the edges of the melodeon frame.   

    Then I went home, aligned the brackets on my melodeon, marked the screw positions with a sharp-pointed awl, drilled tiny pilot holes with an electric drill, and then set the brackets and screwed in the fixing screws. 

    All fine.  I think that the biggest part was the encouragement and the basic facts on alignment, etc.  Also, if the screws are properly sized, it should be difficult (or maybe even impossible) to do any real damage.

    I think it's an easy, safe task to do at home.  But if I felt at all reluctant, I wouldn't hesitate to take it to a repairer or catch one at his booth at a festival or music show.  In fact, it's the kind of thing that an experienced friend could do for you or help you with if you agree to meet ten minutes early at your local session.
Logged
I love one-rows!  Four reeds kick butt!!!!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Attaching Pokerwork strap clips
« Reply #2 on: March 25, 2008, 02:44:12 PM »

Brian,

If you get the parts from me I can supply suitable screws and a template to show where to place the screws.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

brianleach

  • Member
  • *
  • Offline Offline
  • Posts: 43
Re: Attaching Pokerwork strap clips
« Reply #3 on: March 25, 2008, 03:38:55 PM »

Thanks for that Theo.

Do you recommend the Hohner type strap brackets for a D/G Pokerwork.

If you do I would like to take up your offer and will place my order straight away.

Brian Leach
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal