Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: dust mask & glasses  (Read 8760 times)

0 Members and 1 Guest are viewing this topic.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
dust mask & glasses
« on: May 20, 2010, 10:39:24 PM »

Being in the melodeon making business I spend many hours working with a table saw, band saw, spindle moulder or planer. Trying to avoid an untimely death I usually wear a dust mask w/ removable filter (also for gas). Trouble is, I also must wear glasses and the two things are almost incompatible: if I want to see clearly, the mask doesn't cover the nose properly and my glasses tend to get steamy. There must be people out there having the same problem. I've tried several places that deal with protective equipment and safety gear, but to no avail. Does anyone know of an easy-to-use dust/gas mask which allows you to wear glasses at the same time?? (The astronaut type mask is out of the question). Any advice is greatly appreciated!
Logged

Randal Scott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 399
  • Detroit MI
Re: dust mask & glasses
« Reply #1 on: May 20, 2010, 10:45:53 PM »

Trying to avoid an untimely death...

There must be people out there having the same problem.

Right you are.  But, I haven't yet figured out an effective remedy against mouldering.   :|glug
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: dust mask & glasses
« Reply #2 on: May 20, 2010, 10:52:21 PM »

Hi.
Used to have this problem,now use disposable mask with valve,works a treat.
Hope this helps.

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

ladydetemps

  • Emote Wizard
  • Forum Librarian
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 3768
  • Castagnari Tommy D/G, Hohner 1 row 4 stop in C
    • My Youtube Channel
Re: dust mask & glasses
« Reply #3 on: May 20, 2010, 10:54:09 PM »

or get contact lenses? ;)

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: dust mask & glasses
« Reply #4 on: May 20, 2010, 11:45:35 PM »

Simple solution is to get an air fed respirator, Trend make one as do others. 

There are also examples of home made jobs that work just as well, unfortunately I've 'lost' my links page ( http://oldsoke.com/ ) ...can't remember whether 'laymar crafts had anything amongst their wealth of info but google will prob take you there.

Axminster Power tools may have something suitable.  Check out any other woodturning suppliers.....

Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: dust mask & glasses
« Reply #5 on: May 20, 2010, 11:48:53 PM »

I use this mask...

http://www.axminster.co.uk/product-Vitrex-Twin-Filter-Respirator-719630.htm

that works well, is very comfortable and available with vapour filters with these goggles...

http://www.axminster.co.uk/product-uvex-Ultra-Comfort-Safety-Goggles-21089.htm

that are big enough to wear with glasses and have never had any problems with steaming up or poor visibility.

The only downside is that if you talk whilst you're still wearing it then it makes you sound like a slightly camp Darth Vader.
« Last Edit: May 20, 2010, 11:56:16 PM by WhatsAMelodeon? »
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: dust mask & glasses
« Reply #6 on: May 21, 2010, 08:53:44 AM »

Airfed full face are good - some use battery powered blowers and filterpacks at waist level or the back of the helmet (used to be standard issue in foundries for fettlers so a hardhat was also required) some require a remote compressed air feed and filter.  They are probably still not cheap but are about the best thing I came across as a Health and Safety Manager for your situation.

Avoid contact lenses like the plague.  You won't keep all the dust out and if it gets under the lens you WILL be in agony.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: dust mask & glasses
« Reply #7 on: May 21, 2010, 11:14:55 PM »

Same problem with dry woodturning / sanding and welding / grinding - specs steam up 'orribly

For wood working I have made up a large fan / filter unit using ex equipment fans which draw the air past my face collecting / diverting dust on the way, in fine weather this exhausts out of the workshop, in the cold I use it as a recirculating filter which runs constantly, it works very well and even before abrasive actions commence it pulls a surprising amount of dust out of 'fresh air'.

The downside is cleaning the filter surface can be messy and needs to be done pretty frequently, a converted shop vac pulling through a Dyson cyclone (and exhausting outside as the fine foam and fibre filters clog to quickly !) cleans up both the filter (and the clothing) as well as settled dust / swarf etc.

Do not underestimate the amount of fine (= the most harmfull as it is fully inhaled) dust which exits through the filter media of most domestic and often quite expensive hobby / commercial vacs - chech with a fine strong light beam if you don't beleive me.

I am fortunate in that my 'exaust' does not impinge on neighbours or passers by but should be considered.

We have an metal finishing division at work and having tried all sorts of personal breathing gear have ended up with downdraft workbenches where the work surface is perforated, with an extractor drawing air and dust from underneath, the downward curtain of air has been very effective at pulling the relatively light ali dust (generated by scotchbrite pads on orbital sanders) down and away.

Watch out for static if using unearthed or plastic tubing, a good dust explosion has blown up many a fine establishment.

Hope this helps
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: dust mask & glasses
« Reply #8 on: May 22, 2010, 07:05:53 PM »

Airfed full face are good - some use battery powered blowers and filterpacks at waist level or the back of the helmet (used to be standard issue in foundries for fettlers so a hardhat was also required) some require a remote compressed air feed and filter.  They are probably still not cheap but are about the best thing I came across as a Health and Safety Manager for your situation.

Avoid contact lenses like the plague.  You won't keep all the dust out and if it gets under the lens you WILL be in agony.

I use one all the time in the workshop (I work with a fretasw umpteen hours a day)  I use the same type as offered here and the only problem I've had is that the hose wears and needs replacing (or patching) a bit quicker than I'd like http://cgi.ebay.co.uk/3m-Dustmaster-/270579950711?cmd=ViewItem&pt=UK_BOI_ProtectiveGear_RL&hash=item3effd26477

Highly reccomended and allows me to wear my reading glasses behind the face shield so I can actually see the line I'm trying to cut  (:)  ARCO carry them and the spares.

Steve
Logged

Kautilya

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
Re: dust mask & glasses
« Reply #9 on: May 23, 2010, 12:34:42 AM »

Being in the melodeon making business I spend many hours working with a table saw, band saw, spindle moulder or planer. Trying to avoid an untimely death I usually wear a dust mask w/ removable filter (also for gas). Trouble is, I also must wear glasses and the two things are almost incompatible: if I want to see clearly, the mask doesn't cover the nose properly and my glasses tend to get steamy. There must be people out there having the same problem. I've tried several places that deal with protective equipment and safety gear, but to no avail. Does anyone know of an easy-to-use dust/gas mask which allows you to wear glasses at the same time?? (The astronaut type mask is out of the question). Any advice is greatly appreciated!
A photo would help as not sure why u are fogging.

 There is a mask for (melnet!) bikers to wear inside the helmet to avoid misting up the visor. Not tried as some time back they seemed v expensive. But I recently  bought three or four dust masks at local diy which look similar and only cost about 1.50 but have not tried with my full face yet.     I usually use an open face behind windscreen so fogging dont happen.

Foggy breathe guard - actually this is not as expensive as I thought -13.99
http://www.respro.com/products/racing/road-racing/foggy_mask/

 Pinlock anti-fog inner visor- http://www.webbikeworld.com/anti-fog-visor/

or you could put anti fog spray on your specs

http://www.google.co.uk/search?hl=en&lr=&q=visor+anti+fog+spray&aq=1&aqi=g2g-m2&aql=&oq=visor+anti+fog&gs_rfai=

not sure if this helps ??? ???
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: dust mask & glasses
« Reply #10 on: May 23, 2010, 06:49:37 AM »

Occupational inhaled dust prevention is rather less about masks than what is a called 'local exhaust' If you can rig effective fan/ducting that pulls air dust away from you to the outside that will be better. You'd basically need close fitting micron filters to stop the tiny particles that get into lung, nose and sinuses from modern machine sanding. Any felty ones you'll get in B&Q  have limited effect on the small stuff

  More on http://www.hse.gov.uk/woodworking/dust.htm

Note that some of the advice given is 'compulsory' (eg fan inspection).  I'm not sure how that is enforced on the self employed - but the underlying  health issues still stand. The classic 'cluster' of nose cancers in Wycombe was traced to long term exposure to sanded wood/glue used in a chair factory  Beware of laminates, but even pure hardwood dust per se is now considered risky. Overall it's more about asthma - a 500x raised incidence of a very rare disease is still quite a low number.
Logged
  _       _    _      _ 

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: dust mask & glasses
« Reply #11 on: May 23, 2010, 05:20:08 PM »

And not to raise the anxiety level too high, but don't forget to keep in mind the explosion hazard from the particulate.  The motors on any of your exhaust equipment should be spark protected.  This is not a joke, it happens.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: dust mask & glasses
« Reply #12 on: May 24, 2010, 06:41:41 AM »

Please note that it is not actually legal just to vent wood dust into the environment outside your workshop.  Counts as environmental discharge and requires licences etc.

In a workplace assessment the starting point with any health and safety problem is elimination.  In the case of dust this starts with adequate dust extraction and collection.  The downside is that this involves moving large volumnes of air and that is noisy so hearing protection may also be needed.

Steve
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: dust mask & glasses
« Reply #13 on: May 24, 2010, 11:35:32 PM »

Quoted
"Please note that it is not actually legal just to vent wood dust into the environment outside your workshop.  Counts as environmental discharge and requires licences etc."

Tis true Steve, but the question of scale and risk seems to apply even in commercial premises which I have been involved with, the Local Authorities concerned have treated LEV extraction outlets conveying minimal quantities of fume or dusts (i.e. after primary filtration) as acceptable and would only become further involved if there were local complaints - interestingly under Statutory Nuisance rather than Environmental Regs.

Diatonix does not sound like a major source of pollution given the nature of the trade and if he looks at LEV rather than the PPE route, his Local Authority Environmental Health Dept. and (in my experience, contrary to their current demonisation in the media - instead of the Insurance companies who I suspect are the root cause of modern "H & S Madness") the HSE may prove very helpful in solving the problem, particularly since they prefer to prevent injury rather than follow up after one..............

If only we could persuade the rural authorities to do something about Agribusinesses blowing chemical dust and spray over neighbours and, since straw burning has been stopped, the huge dust clouds from modern straw chopping combines  (rant mode off)

BTW My woodturning lathe is on a stand with castors so in nice weather I much prefer to wheel it outside to use, the light is better and usually there is a breeze which takes care of any dust - unless they are combining the adjacent field that is  >:E
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: dust mask & glasses
« Reply #14 on: May 25, 2010, 08:15:46 AM »

BTW My woodturning lathe is on a stand with castors so in nice weather I much prefer to wheel it outside to use, the light is better and usually there is a breeze which takes care of any dust - unless they are combining the adjacent field that is  >:E

Hmmm - stangely that solution 'feels' legal - whereas I take your point wrt discharge out onto a busy street or similar. Whatever the H&S button counters make of it - the underlying science is that "long term exposure" to "a concentration" of "certain dusts" (hardbood and glue in this case) leads to as "raised lifetime incidence" of certain rare respiratory diseases (but don't forget asthma).

As the mechanism is believed to be stochastic (time x dose dependent) a local exhaust - or dilution in the case of BB's garden - is deemed to work. We could argue about the point that a filter was needed but a passer by with brief exposure to 'occupational' levels would come to no harm.

We have quite the opposite problem in Xray with no shielding 100.000% perfect and the effect proven to be non-stochastic. A single gamma ray might be the one that causes the mustation that leads to a disease. All we can do is strive for 'as low as reasonably achieveable' and pay the physicists to monitor us.

I'd reiterate that in both cases:  an increased risk x a very small number = still a decent lifetime bet.  

A pack of cigarettes a day would affect your odds much more!
« Last Edit: May 25, 2010, 08:19:43 AM by Chris Ryall »
Logged
  _       _    _      _ 

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: dust mask & glasses
« Reply #15 on: May 25, 2010, 09:55:06 AM »


As the mechanism is believed to be stochastic (time x dose dependent) a local exhaust - or dilution in the case of BB's garden - is deemed to work. We could argue about the point that a filter was needed but a passer by with brief exposure to 'occupational' levels would come to no harm.


Unless they get sawdust in their eyes and blunder into the raod whilst rubbing them and ... 

OK, I'm now being silly  >:E

However on the substantive point then I think that a Dustmaster or similar is the best answer. In the case of those of us with beards it also gets round the problem of getting a satisfactory seal with a nose and mouth based mask.

Steve
Logged

dr.harp

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: dust mask & glasses
« Reply #16 on: May 27, 2010, 01:08:57 AM »

A flip down/flip up full shield (preferably mesh) works great. The solid ones are better for deflecting sawdust but get a bit warmer.
Logged
Owner of Wilson Music Services - Repairs to accordions and harmonicas, specializing in Hohner.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal