Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Custom 2 row modeled after the Hohner Pokerwork  (Read 8760 times)

0 Members and 1 Guest are viewing this topic.

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Custom 2 row modeled after the Hohner Pokerwork
« on: June 04, 2010, 04:28:26 AM »

Here are some pictures of my custom 2 row project. The accordion has a similar body to the "Hohner Pokerwork" but custom from the ground up with extended treble (25 Buttons) and bass (12 Buttons) range in addition to adding a 3rd set of treble reeds (MMM). I'm having fun with it, but I can't count the hours I have into it. Well over 100 Hrs. for sure; mostly because I'm designing it as I build it. Enjoy the Pic's!
« Last Edit: June 04, 2010, 04:45:07 AM by acctech »
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Post 2
« Reply #1 on: June 04, 2010, 04:30:41 AM »

Pic's #2
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Post 3
« Reply #2 on: June 04, 2010, 04:32:59 AM »

Pic's #3
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Post 4
« Reply #3 on: June 04, 2010, 04:35:01 AM »

Pic's #4
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #4 on: June 04, 2010, 05:16:08 AM »

Very nice. Great to walk over to the parts shelf : )  !

I see you have a rotella for an adjustable bass strap, good upgrade.
Are you going to use a stock Pokerwork bellows ?
« Last Edit: June 04, 2010, 01:53:07 PM by melodeon »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #5 on: June 04, 2010, 07:12:13 AM »

Looking lovely! Where did you get the treble mechanism?
« Last Edit: June 04, 2010, 12:46:10 PM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #6 on: June 04, 2010, 11:49:14 AM »

I'm having fun with it, but I can't count the hours I have into it. Well over 100 Hrs. for sure; mostly because I'm designing it as I build it. Enjoy the Pic's!

Looks great, Tim!
-Andy

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #7 on: June 04, 2010, 06:00:24 PM »

Beautiful! I can smell freshly cut wood when I look at the pictures.

Did you use ply or solid for the soundboard?

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #8 on: June 05, 2010, 07:50:43 AM »

You'd get significantly more sound with larger (= rectangular) holes in your sound board (which doesn't have to be that thick). If you don't opt for a register, you could have  oblong holes (ca 10mm x 23mm) for the outer reed blocks and  smaller ones (10mm x 11mm) for the one in the middle. Otherwise:  excellent work.
« Last Edit: June 05, 2010, 10:24:37 AM by diatonix »
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Post 4
« Reply #9 on: June 06, 2010, 02:30:24 AM »

Tim,

I just looked over your pics again... what aspect of this is based on the Pokerwork?  Bellows dimension?  The use of Pokerwork hardware?  It looks like a ground-up build of a relatively small MMM box like the Castagnari Roma!

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #10 on: June 06, 2010, 09:33:56 PM »

The chrome corners  (or slots for same) for sure.
Logged

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #11 on: June 08, 2010, 03:04:43 AM »

The treble mechanism is a corona type mechanism, of coarse it's modified to fit. The soundboard is 1/4" Baltic birch 5 ply - available from Woodcraft. It's thicker than it needs to be, but it was convenient to get and use, who knows how it will sound... but that's the nature of experimenting. I had given some consideration to installing a stop and a low reed on the middle block. (The donor blocks are from a Corso) One of the problems would have been the spacing between the holes in the block. The diameter of the holes is larger than the space between them. I would have had to make a new bottom for the block with squared holes to allow for a functional slide. It's possible, but I ultimately opted for a mussette. I plan on a mild sweet mussette, approx. -8 cents/ on pitch / +8 cents.  Yes, squared holes for all the blocks and on the sound board would increase performance. However I feel the standard round holes will perform sufficiently. (which mine are about .5mm larger than stock Hohner's simply because that was the closest forstner bit I had.) The box (with exception to the keyboard housing yet to be built) is the same size as a 2815 (Pokerwork) , it's built to accept stock 2815 bellows frames, although I will be using 22 folds and the bellows will be white lining with black tape. The grill of a 2815 will also fit in the accordion. The box will have silver corners like the 2815. The wood for the body is simply a nice quality pine, I will be using a black lacquer rubbed out finish. I bought a chemical "wood hardener that I plan to use to both harden and seal the wood before I apply finish. I have to test this before I use it, as I'm uncertain what results I might get. I will post more picture as the project progresses. Next step is to fabricate a keyboard.
« Last Edit: June 08, 2010, 03:08:15 AM by acctech »
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #12 on: June 09, 2010, 12:57:53 PM »

Thanks for the updates!

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #13 on: June 09, 2010, 03:56:01 PM »

Consider the configuration and components used
I belive the box should be dubbed the

CORSICA
Logged

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #14 on: June 10, 2010, 04:40:27 AM »

I'm thinking about calling it the "Ronny" after my father's nick-name. I'm building it for him.
« Last Edit: June 17, 2010, 03:48:20 AM by acctech »
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #15 on: June 17, 2010, 03:52:05 AM »

Here are some more pictures, is coming along.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #16 on: June 17, 2010, 03:57:19 AM »

Second set of 3rd pictures, including me.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #17 on: July 17, 2010, 06:10:04 AM »

Here is the 4th round of pictures, the finish is not perfiect, but you have to call it at some point. It's humid here, and I don't have a large airbrush, so for the moment I'm stuck with spray cans.  :'( Maybe I'll have a better setup in the future.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #18 on: July 17, 2010, 06:11:05 AM »

2nd set of 4th batch
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

John C

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
Re: Custom 2 row modeled after the Hohner Pokerwork
« Reply #19 on: July 17, 2010, 11:08:53 AM »

Hi Tim,
I enjoyed meeting with you last year at the Button Box meet.

Congratulations on the box, looks like you did a really good job


John
Logged
Saltarelle Laurentide GCF, Saltarelle Cheviot ADG
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal