Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4 5 6 7   Go Down

Author Topic: A series of holiday projects  (Read 38049 times)

0 Members and 1 Guest are viewing this topic.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
A series of holiday projects
« on: June 22, 2010, 12:28:55 AM »

As some of you will know, I've gone a bit overboard on eBay over the last few weeks, exams being my excuse. This means that I have a number of boxes that need fixing up that I am intending to do something about over the next few months.

1) Hohner 1140C. This was kindly donated to me by Rob2Hook of this parish. It's a lovely little one-row; it's been a bit beat up but is basically sound. I've enjoyed playing it, but it does need an overhaul. Valves are dropping off it and the wax is dry and cracked. In addition the reeds need a tune and are a bit rusty. Other than that it is pretty good, bellows are sound, gaskets aren't leaking and neither are the pallets. I'd put in a strap bracket and probably a new thumbhook as well.

2) Weltmeister C/F Club. Bought off eBay for �20 plus p&p. This isn't in as good condition as the one-row. The grill (which is a horrible plastically material) has broken on both panels and will need to be carefully taken out and replaced with something else. Not sure what, as it needs to be flexible to bend round the top, yet rigid enough not to collapse. Pallets need refacing, I can feel the air leaking out of them. Bellows gaskets are leaking like a sieve. I'm not sure about the bellows, there's been some repair work done but they seem to be reasonably sound. I'm hoping that I won't have to retape them. On the bass side, the mechanism (which picks up the tonic when you press the bass) is sticking slightly. It is all on a rod and it may be that the wood has swollen slightly. A bit of care with some sandpaper might sort it out, but I'd have to take it to pieces first. The reeds are more or less in tune and the leathers seem to be in reasonable nick, no real rattly noises coming through. One of the bass reedplates has fallen off though, so the bass end will need rewaxing. If I do get around to tuning the treble end then I should probably revalve and rewax anyway.

3) Hohner Imperial IIA (PA). Bought off eBay for �5 plus p&p. This is a PA around the size of a Liliput (The bellows dimensions are approx 25mm by 14.5mm. I am sure that there are measurements for the Liliput somewhere on the web but can't find them quite at present). It has two octaves in the treble and an astonishing 32 [4*8] bass. My original thought when buying it was that it would make an unusual frankenstein, but I'm rather loath to split it up, even if I had another half. The other problem is that it is bass/major/minor/dominant and only goes up to E. If I were to make it usable I would probably shift it 2 down, making it end in F#, using the Bb reeds for the B row and probably having to buy new reeds for the F# row (4 semitones seems a lot to ask for a reed). This would obviously be a bit of a bugger to do, so I probably won't get round to it. The bass machine is in fantastic condition, not a sticky key in sight and not dirty or grimy at all inside. Tuning is pretty much OK for the bass, with the wax and valves in reasonable nick. I am hearing a slight, very high pitched sound when I play it though, don't know what might cause that. Slight annoyance in that someone replaced one of the bellows pins with a screw, which at least isn't philips and is suitably shiny. It doesn't look too out of place and it is on the back and more importantly doesn't appear to be leaking. So I won't bother replacing it. Some of the remaining bellows pins are very rusty. The bellows are completely shot, need retaping as a minimum. Bellows gaskets appear to be perished. On the treble end, it is in need of a full reed overhaul and it is sounding rather hard, not sweet at all. In addition the keys need levelling and the pallets are all wonky. I haven't the first idea what to do about that, other than physically bending them, which just seems wrong. All in all it has the potential to be a really very interesting box, but would need a lot of work doing to it.

4) Hohner Amati IIIM 3 row B-griff CBA. Semi-intentionally bought off eBay last week. Hasn't arrived yet. This, I vow, will be the last box for a while UNLESS I find a Liliput or even better a Preciosa OR I find something else that is really remarkable and unmissable :P

So those are the three boxes that I am planning to do up over the summer. If I am optimistic then I suppose that I might get one finished. Aim is to start Thursday next week, when I have no parents breathing down my neck. In order of difficulty I list the things that I need to do below.

Obviously there are lots of things that I need to get first, which is my job for Wednesday. Most importantly, bellows gasket, valves and accordion wax. Then there is pallet facing, fine sandpaper, a set of needle files, a chromatic tuner (getting one of them cheaply might be difficult), bellows straps, strap brackets, thumbstrap, grille cloth, felt (for treble action on the Imperial), bellows tape and probably springs, bellows pins and all sorts of other things that I will break or lose. Getting all of this stuff from Charlie Marshall will probably cost a bundle, in the region of �100 I think, so I will do one box at a time to limit the shock to my bank balance. Not altogether sure which one. Probably the one-row, despite my slight nervousness about starting tuning. A friend of mine has started tuning boxes and said that it wasn't quite as difficult as people say, which is a relief somewhat. Should be a challenge at any rate.

My hope is that by posting here I will actually get on and do some of it! I'll let everyone know how I get on.
« Last Edit: October 25, 2010, 06:10:44 PM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: A series of holiday projects
« Reply #1 on: June 22, 2010, 12:02:09 PM »

Please do! In return we (probably anyway) promise encouragement from the sidelines.  :-*
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #2 on: October 25, 2010, 06:12:20 PM »

After a long time of doing nothing, I am gradually getting round to doing things on this, since my degree is going so badly :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: A series of holiday projects
« Reply #3 on: October 25, 2010, 06:57:53 PM »

About time too! (says I looking round at the fifteen or so melodeons sitting forlornly on the shelf waiting for me to find a "bit of spare time").  :Ph
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #4 on: October 25, 2010, 08:18:07 PM »

About time too! (says I looking round at the fifteen or so melodeons sitting forlornly on the shelf waiting for me to find a "bit of spare time").  :Ph

Turns out "a bit of spare time" is a vey large amount of hours if my experience is anything to go by. I have spent bl00dy hours - stripping tape off of bellows and then fitting new, taking pallet facing off and then fitting new, dewaxing reeds and then rewaxing, removing valves and fitting new. The only upside is it has put off the evil hour of tuning, mind you I have just completed the first pass of the "on key" reeds of the G row and they don't sound so bad except the very high B reed which I killed  :-[.

Very satisfying when it goes well very very frustrating when it doesn't.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #5 on: October 26, 2010, 12:07:29 AM »

About time too! (says I looking round at the fifteen or so melodeons sitting forlornly on the shelf waiting for me to find a "bit of spare
time").  :Ph

Turns out "a bit of spare time" is a vey large amount of hours if my experience is anything to go by. I have spent bl00dy hours - stripping tape off of bellows and then fitting new, taking pallet facing off and then fitting new, dewaxing reeds and then rewaxing, removing valves and fitting new. The only upside is it has put off the evil hour of tuning, mind you I have just completed the first pass of the "on key" reeds of the G row and they don't sound so bad except the very high B reed which I killed  :-[.

Very satisfying when it goes well very very frustrating when it doesn't.


Sounds like you are in the same position as me, just plus time and experience Lester (:) I've got three boxes in various states of disrepair. I'm rather looking forward to doing all the tedious but possible jobs, because they aren't tuning :P I have a disadvantage in that I've NEVER done it before and don't have any "spare" reeds to do it on :( I have read lots about it, but am resigned to the fact that my PA's reeds are probably going to end up half out of tune and half broken. They sound terrible anyway and the box is worthless, so never mind :P I Need to get the hang of it (ish...) with that box though, because the others I would quite like to keep...

EDIT: Plus time refers to the fact that you are substantially ahead of me, not that you have more spare time than me, but given that you are retired and I am at the University of "Let's work them so hard that any hope or enthusiasm will be drained from their unresisting bodies" then I'd be surprised if you do :P

The three dance sides, ceilidh band and piano trio have nothing to do with it of course *cough*
« Last Edit: October 26, 2010, 12:13:25 AM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #6 on: October 26, 2010, 01:26:16 AM »

I am currently scouring the archives (what a useful forum this is) for advice on tuning and the big problem that I have at the moment (apart from not being able to do it of course) is that of tools.

Basically I have no tools, no equipment WHATSOEVER. I have a few poor quality screwdrivers and that's a bit it. Some things I could get out from the department tool store and I could use their machines, but really they are geared towards larger scale stuff and to be honest aren't very student friendly. Raw materials I think I'd have to get myself.

So much as I would like to make my own files and reed tools I'm not sure that it is going to be an option.

As I understand it, the German method of tuning the underside reeds(which looks a lot simpler than the Italian one) is to get a pinger and to jam it at the top and lever up the reed, then supporting it with coffee sticks etc. Those are no problem, I'm well experienced at swiping large quantities of stirrers (useful for making sword locks). The pinger though, CGM stocks them in two sizes. These are quite cheap and seem to be cheaper than those that I would find elsewhere. I don't think that ecnomising on those would be particularly possible (I could make them out of sheet aly easily, but they'd be too thick, too rough and would need sanding etc). The pingers should last for ages as well.

Then there is the scratcher. If I have understood it correctly then this should be used for scratching the bottom of the reed. Is this because it is so sensitive that using a sander would remove too much material. If so God Help Me, but is there a particularly recommended scratcher? For the rest of it I believe that I can use sandpaper, which is good because it is cheap. I could buy a sanding pen, but another poached stirrer and some sandpaper glued to it seems better (Theo mentioned fine on one side, coarse(r) on the other, although I think that it'll be a while before I can work up the courage to use coarse paper). Although I don't even have any glue with me. More expense. That reminds me, I need to go through the archives to find out what glues to use.

Then there is the problem of tuners. *sigh* I don't have a decent electronic tuner and really can't afford Dirk's program or a Stroboflip. I don't have an iPod touch or I could use the app. I could use Bill's tuner, but I have to calibrate it to the clock and I don't know how to do that. I also don't think that anyone has used it so far, which (although I am sure that it is fine) does worry me slightly. So I could buy a normal chromatic tuner, but I am reticent to do that, because it is more expense. I'm not sure what the answer is here, probably to work out how to calibrate Bill's tuner.

Lots more archive searching needed I think :(
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: A series of holiday projects
« Reply #7 on: October 26, 2010, 07:19:30 AM »

It's always worth buying the best tools you can for the job, they'll generally get better results and make life much easier and the ones for reed tuning and waxing aren't expensive compared to the specialist tools needed in other areas. To put things in perspective, the last set of special files I bought for the nut slots in stringed instruments cost me £120 and I also need to buy a cello peg reamer, the cheapest version of which costs €70 not including shipping from Germany, I'll probably have to make my own peg shaper as well because to buy one would cost €99. Compared to that, £25 for a set of tuning tools or £13.95 for a waxing spoon from CGM is a bargain.

If you're going to go with the sandpaper on a stick method then double sided tape, (an invention on a par with the internal combustion engine and the wheel in my book, I wouldn't have got where I am today without it), is better than glue for that purpose, much less messy, easier to change once the paper is worn and you can use it more or less straight away. The advantage of using sandpaper isn't the cost, (wears quickly, cost of tape, cheap sandpaper is rubbish and good sandpaper is quite expensive), but being gentler on the reeds and safer for a beginner than a file. The file that Theo himself recommends for tuning only costs £2.70 from Axminster.

Acquiring the tools, equipment and know-how to repair instruments isn't cheap, there are more economical ways than others but it will cost you a bit however you do it and if you're serious about it you'll have to find a way to pay for what you need, which will probably involve a lot of hard work and/or some big sacrifices.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A series of holiday projects
« Reply #8 on: October 26, 2010, 09:46:16 AM »

Acquiring the tools, equipment and know-how to repair instruments isn't cheap, there are more economical ways than others but it will cost you a bit however you do it and if you're serious about it you'll have to find a way to pay for what you need, which will probably involve a lot of hard work and/or some big sacrifices.

You will also need to invest considerable amounts of time. 
Learning where to remove metal to raise or lower the pitch of a reeds only takes a few minutes, but learning how to control that process, to achieve the desired effect takes much longer, and you must develop good manual dexterity, and good listening skills.  You also need to learn to work towards applying these skills quite quickly.  For example a typical Hohner two row contains 61 reed plates, 122 reed tongues.  If it takes you say 2 minutes to tune one tongue then the full job would take about 4 hours, get that time down to half a minute per tongue and you could do it in an hour.  Same sort of time calculations apply to cleaning, waxing, applying new valves.  The number of times that operations have to be repeated can drive you up the wall.  You need to be able to set aside extended periods of time where you are undisturbed and can give your whole attention to the task. 

You also need space where you can lay out all the parts with no risk of them being disturbed when you are not working on them.

Good luck.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #9 on: October 26, 2010, 11:18:55 AM »

I have now tuned two reed plates (yes two whole reed plates) on my pokerwork the G and the A and they are in tune and have the same tremolo. Only taken ~2 hours so about a week to go  :o

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #10 on: October 26, 2010, 11:59:43 AM »

You will also need to invest considerable amounts of time. 
Learning where to remove metal to raise or lower the pitch of a reeds only takes a few minutes, but learning how to control that process, to achieve the desired effect takes much longer, and you must develop good manual dexterity, and good listening skills.  You also need to learn to work towards applying these skills quite quickly.  For example a typical Hohner two row contains 61 reed plates, 122 reed tongues.  If it takes you say 2 minutes to tune one tongue then the full job would take about 4 hours, get that time down to half a minute per tongue and you could do it in an hour.  Same sort of time calculations apply to cleaning, waxing, applying new valves.  The number of times that operations have to be repeated can drive you up the wall.  You need to be able to set aside extended periods of time where you are undisturbed and can give your whole attention to the task. 

You also need space where you can lay out all the parts with no risk of them being disturbed when you are not working on them.

Good luck.

I'll need it :P I'm not sure whether I will get through it, but I'm determined to give it a good shot. If the result of my efforts means that I can do quick simple fixes on my boxes but have to get a tech in for the bigger jobs then I will be delighted. My PA has 94 reed plates on treble and bass. That is a lot of time! I am going to use that box as the test rig and rewax and revalve it and then try tuning it. Losing the money on the valves some of which will inevitably have to replaced (along with the reeds...) is a pain, but one that goes with practising anything.

I have quite some way to go in terms of reading about tuning before I can start, although obviously once I do any reading that I do will quickly be supplanted by a whole series of "what not to do's".

Space is not a problem, I have loads of it this year. I've got that planned out. Time is potentially more of a problem and I am sure that I won't get far this term for that reason.

It's always worth buying the best tools you can for the job, they'll generally get better results and make life much easier and the ones for reed tuning and waxing aren't expensive compared to the specialist tools needed in other areas. To put things in perspective, the last set of special files I bought for the nut slots in stringed instruments cost me £120 and I also need to buy a cello peg reamer, the cheapest version of which costs €70 not including shipping from Germany, I'll probably have to make my own peg shaper as well because to buy one would cost €99. Compared to that, £25 for a set of tuning tools or £13.95 for a waxing spoon from CGM is a bargain.

If you're going to go with the sandpaper on a stick method then double sided tape, (an invention on a par with the internal combustion engine and the wheel in my book, I wouldn't have got where I am today without it), is better than glue for that purpose, much less messy, easier to change once the paper is worn and you can use it more or less straight away. The advantage of using sandpaper isn't the cost, (wears quickly, cost of tape, cheap sandpaper is rubbish and good sandpaper is quite expensive), but being gentler on the reeds and safer for a beginner than a file. The file that Theo himself recommends for tuning only costs £2.70 from Axminster.

Acquiring the tools, equipment and know-how to repair instruments isn't cheap, there are more economical ways than others but it will cost you a bit however you do it and if you're serious about it you'll have to find a way to pay for what you need, which will probably involve a lot of hard work and/or some big sacrifices.

£120? Bloody hell. I'm getting off easily :P I can't say that a file is looking inviting at the moment, sandpaper I like the look of for that reason. I am intending to get the Axminster files that Theo talks about, since they are so cheap. The postage is a nuisance though and I don't know anywhere that stocks Axminster stuff near me. Perhaps if I buy a sanding pen that would be more cost effective, given what you say about sandpaper.

Could I use a scriber as a scratcher, if I sharpened it on a diamond stone? I can get both of those things nice and cheaply from the hardware store. Buying one of the things from Hohner is not an option, WAY too expensive. I've scoured the thread (tallship's one is particularly useful) and Theo suggests snapping off a drill bit and grinding it to shape. CGM do one for about £10 which seems reasonable, but I don't know enough about them to know whether it is the thing to get.

There's more, but I've got a lecture in a minute's time :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A series of holiday projects
« Reply #11 on: October 26, 2010, 02:15:17 PM »

Losing the money on the valves ...


What!  Valve are about the cheapest part of the job.   Don't be tempted to try to flatten out old curled leather valves, they need to go in the bin! Using good new valves is essential to getting a good result.  I've just had to do a complete re-valve and re-wax of a Hohner two row that had been "overhauled" by an amateur who had cut their own valves from leather.  It played like a cold pudding!

If you are really strapped for cash then perhaps you should start with the instrument with fewest reeds which will be the Hohner 1140.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #12 on: October 26, 2010, 02:34:43 PM »

Losing the money on the valves ...


What!  Valve are about the cheapest part of the job.   Don't be tempted to try to flatten out old curled leather valves, they need to go in the bin! Using good new valves is essential to getting a good result.  I've just had to do a complete re-valve and re-wax of a Hohner two row that had been "overhauled" by an amateur who had cut their own valves from leather.  It played like a cold pudding!

If you are really strapped for cash then perhaps you should start with the instrument with fewest reeds which will be the Hohner 1140.

Don't worry, it's just me being grumpy :P It'll cost about £20 I think for the PA in valves, which isn't unappreciable, but equally really isn't that much.

Remembered my other question. On tallship's thread he pretuned the reeds before waxing. I hadn't heard of anyone doing this before, apart from with brand new reeds. Am I to presume that this was because he was converting the box, rather than retuning?

EDIT: Actually maybe I've miscounted. Probably more like £15...
« Last Edit: October 26, 2010, 02:36:21 PM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #13 on: October 26, 2010, 02:48:18 PM »

Remembered my other question. On tallship's thread he pretuned the reeds before waxing. I hadn't heard of anyone doing this before, apart from with brand new reeds. Am I to presume that this was because he was converting the box, rather than retuning?

I have just discovered that even when you tune the reeds on a tuning rig, in the blocks with new wax, valves and TLC they still need fine tuning once the blocks are in the box. Now I already knew this but was unaware how much they would need tuning as a result of fitting the blocks. Still now tuned 12 reeds G -> E so can play Donkey Riding and it sounds OK to TSMB as well as me  ;D

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #14 on: October 26, 2010, 03:08:30 PM »

Remembered my other question. On tallship's thread he pretuned the reeds before waxing. I hadn't heard of anyone doing this before, apart from with brand new reeds. Am I to presume that this was because he was converting the box, rather than retuning?

I have just discovered that even when you tune the reeds on a tuning rig, in the blocks with new wax, valves and TLC they still need fine tuning once the blocks are in the box. Now I already knew this but was unaware how much they would need tuning as a result of fitting the blocks. Still now tuned 12 reeds G -> E so can play Donkey Riding and it sounds OK to TSMB as well as me  ;D

I suppose that makes sense, but it is a bit of a pain :P So should you tune them slightly sharp on the rig so that ((hopefully) the difference will be less acute when in the instrument?
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #15 on: October 26, 2010, 03:14:43 PM »

Remembered my other question. On tallship's thread he pretuned the reeds before waxing. I hadn't heard of anyone doing this before, apart from with brand new reeds. Am I to presume that this was because he was converting the box, rather than retuning?

I have just discovered that even when you tune the reeds on a tuning rig, in the blocks with new wax, valves and TLC they still need fine tuning once the blocks are in the box. Now I already knew this but was unaware how much they would need tuning as a result of fitting the blocks. Still now tuned 12 reeds G -> E so can play Donkey Riding and it sounds OK to TSMB as well as me  ;D

I suppose that makes sense, but it is a bit of a pain :P So should you tune them slightly sharp on the rig so that ((hopefully) the difference will be less acute when in the instrument?

If only it were that easy  >:(  I seems to me (a bit of a virgin at tuning) that the reeds move in random directions on installation of the blocks. I tune them on my rig, then install them, check the tuning (Dirk's Tuner) and note how far they have to move and in which direction, take the block out (this seems easiest rather than trying to do it in the box especially for the pull notes), tune it as per the note, reinstall, recheck, retune etc etc etc.
« Last Edit: October 26, 2010, 03:17:10 PM by Lester »
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #16 on: October 26, 2010, 03:15:34 PM »

Remembered my other question. On tallship's thread he pretuned the reeds before waxing. I hadn't heard of anyone doing this before, apart from with brand new reeds. Am I to presume that this was because he was converting the box, rather than retuning?

I have just discovered that even when you tune the reeds on a tuning rig, in the blocks with new wax, valves and TLC they still need fine tuning once the blocks are in the box. Now I already knew this but was unaware how much they would need tuning as a result of fitting the blocks. Still now tuned 12 reeds G -> E so can play Donkey Riding and it sounds OK to TSMB as well as me  ;D

I suppose that makes sense, but it is a bit of a pain :P So should you tune them slightly sharp on the rig so that ((hopefully) the difference will be less acute when in the instrument?

If only it were that easy  >:(  I seems to me (a bit of a virgin at tuning) that the reeds move in random directions on installation of the blocks.

Fantastic. I suppose I should have known :P The more I read about tuning the more I want to have a go :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: A series of holiday projects
« Reply #17 on: October 26, 2010, 04:20:20 PM »

Coming back to valves - I need to refit some Hohner mylar(?) valves that seem to be in good nick, but on Googling around I can't readily identify a suitable adhesive. Superglue has been mentioned, but I'm not keen on using it.
Contact or spray cement also, as generic terms, but I'm not sure how these relate to purchase-able products.
Any suggestions?

Ta

Malcolm

PS bought a cheap electronic metronome in Aldi or Lidl a while ago - it has a tuner function.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #18 on: October 26, 2010, 04:29:43 PM »

Bostik seems to be recommended by people on here (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #19 on: October 26, 2010, 04:31:43 PM »

Coming back to valves - I need to refit some Hohner mylar(?) valves that seem to be in good nick, but on Googling around I can't readily identify a suitable adhesive. Superglue has been mentioned, but I'm not keen on using it.
Contact or spray cement also, as generic terms, but I'm not sure how these relate to purchase-able products.
Any suggestions?

Ta

Malcolm

PS bought a cheap electronic metronome in Aldi or Lidl a while ago - it has a tuner function.

Rees recommends B&Q Solvent Free  All Purpose Glue but I can't get on with it, it does not stick as well as what I use - Bostik Contact. Bostik also has the advantage of getting you high from the solvent   >:E

Don't use Super Glue!
Pages: [1] 2 3 4 5 6 7   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal