Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5 6 7   Go Down

Author Topic: A series of holiday projects  (Read 38065 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #40 on: October 30, 2010, 09:09:43 PM »


Is there any way of getting  P_A_T_I_E_N_C_E quickly   >:E

Why yes, Lester.....I have found that instantly wrecking something precious and expensive works for me....!  ::)

Good point, well made!

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #41 on: October 31, 2010, 01:15:10 AM »

Another question, bellows tape. PVA or special glue (i.e. Charlie Marshall's stuff). PCA would be more convenient, but both are cheap. I've heard contrasting reports on this forum regarding use of PVA, hence why I ask.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #42 on: October 31, 2010, 08:12:11 AM »

I have used Charlie's "Special" glue and it worked well have not used anything else so can't compare. Mind you his set of instructions have a heavily crossed out first line which recommend using Wallpaper Overlap and Border Adhesive so that is another option.

Previous post that may be of interest HERE

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #43 on: November 04, 2010, 01:39:02 PM »

Ah well, no going back now :o Just spent masses and masses of money on parts and tools. Well, admittedly far far less than I would spend getting someone competent to repair my boxes, but still more than they are worth :P

It'll be interesting how far I get this term. I am not expecting to get very far, due to work and other commitments, but with luck I should at least have cleaned, revalved and rewaxed one of the three.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #44 on: November 05, 2010, 12:08:06 PM »

Happy to report that along with everybody else on this forum I cannot recommend Charlie Marshall's services highly enough (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #45 on: November 06, 2010, 04:55:49 PM »

Stuff is arriving gradually, should be able to begin very shortly.

CGM's "pingers" are not reed lifters, as I had assumed, but a bit of judicous trimming makes them perfectly adequate. I can now lift reeds with the german method. Required a bit of practice, mainly because I was very cautious about damaging the tip, but now all is well. It requires me to slip a bit of blue-tac paper underneath it before I can shim it with the same tool, but all is well otherwise. I use the Italian method for bass reeds, using a bent bit of paperclip, which seems to work amazingly well. Not suitable for treble reeds though, as I think that it would scratch it massively.

I do have a few questions.

Although I don't think that any reed is sticking (although I haven't tested them all properly) some of them aren't perfectly level, i.e. the reed is skewed slightly. Is this something that I should be worried about and is it something that I can fix? I have heard people talk about adjusting the gap between the top of the reed and the slot, but have no idea how one would go about doing it.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: A series of holiday projects
« Reply #46 on: November 06, 2010, 06:08:11 PM »

Don't worry so much what the reed looks like when starting out, only what it sounds like. After you've tuned a few you'll learn to recognize a problem by looking at the reed.  Sound each individual reed, there should be an instant response.  If you hear a rush of air before the reed sounds ( and sometimes doesn't sound at all on the little reeds), the gap is probably too big, in other words, the tip of the reed is sitting too high above the reed plate.  If the reed doesn't sound at all (and no rush of air), or sounds choked before sounding, the gap is probably too small.  All of these problems can also be caused by bad leathers, leathers hanging up, or debris in the reed.

You also need to do this after tuning because sometimes tuning will alter the reed gap. Filing on a good quality reed will sometimes pull a piece of metal to the edge of the reed and it will either hit the slot side or stick. If it's just hitting, you'll get a metallic sound when sounding.

There are far more knowledgeable people here than me, but to reset the reed gap, I just bend the reed (VERRRRRRY CAREFULLY) in the desired direction, a very little at a time, checking response.  The large reeds take a fair amount to change the gap, but be especially cautious on the little reeds, it's easy to bend just the tip and that's not good.  On the little reeds I usually us a scalpel blade (flat part) to work the reed so the there's less chance of putting too much force on the very tip.   

Anyone not agree the info I've put, please do not refrain from calling me on it.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #47 on: November 06, 2010, 06:29:22 PM »

There are three dimensions involved and I'm not sure about any of them. There is the rotation perpendicular to the reed plate, where the reed bends away from the plate (which I have on some of my bass reeds). I think this is what you are referring to blafleur.

There is also the rotation about the rivet, where the gap between the side of the reed and the slot changes. Then there is also the height of the reed, where the gap between the top of the reed and the slot changes. From a site search I see that a way of doing this is to take a small hammer and hit the top of the plate with the end of the reed resting on a flat metal surface (as in the Maugein video). This does not strike me as an easy job :-\
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #48 on: November 08, 2010, 06:17:29 PM »

Any more opinions on this? I'm starting to dissemble and clean reeds before revalving and rewaxing this weekend.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #49 on: November 08, 2010, 06:45:53 PM »

Any more opinions on this? I'm starting to dissemble and clean reeds before revalving and rewaxing this weekend.

I have gone through the worry stage that you seem to be at, what you need to do is give it a go. Once you get going you will learn with every thing you do. I have finished my first wax/valve/tune, it took a long time, I broke one reed, but I learned masses which will make the next one easier, etc etc.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #50 on: November 08, 2010, 07:55:13 PM »

Any more opinions on this? I'm starting to dissemble and clean reeds before revalving and rewaxing this weekend.

I have gone through the worry stage that you seem to be at, what you need to do is give it a go. Once you get going you will learn with every thing you do. I have finished my first wax/valve/tune, it took a long time, I broke one reed, but I learned masses which will make the next one easier, etc etc.

This is quite true! The thing is that I won't have time to do anything until the weekend (probably, unless I decide that work is optional), so I've got lots of time to worry... I think I'm prepared for everything up until tuning, but I suddenly thought of this issue of reed alignment and thought I'd check :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #51 on: November 08, 2010, 07:57:39 PM »

Ooh, another question. The reed plates on my PA are waxed in but have tacks as well. I was planning on removing these and not replacing them. Is this a hideous idea? I had a feeling that someone recommended doing it and it would be a right pain to put them all back again.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: A series of holiday projects
« Reply #52 on: November 08, 2010, 11:08:02 PM »

Ooh, another question. The reed plates on my PA are waxed in but have tacks as well. I was planning on removing these and not replacing them. Is this a hideous idea? I had a feeling that someone recommended doing it and it would be a right pain to put them all back again.

I think the consensus is that the tacks are unnecessary.  I believe Theo has mentioned that he has a bucket full of them.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #53 on: November 08, 2010, 11:10:17 PM »

Excellent. Mind you, if it turned out that they were essential then I would conveniently mishear :P There is no way I'm replacing all of them. Would be worse than retaping bellows (which I'm not exactly looking forward to).
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: A series of holiday projects
« Reply #54 on: November 08, 2010, 11:37:17 PM »

Would be worse than retaping bellows (which I'm not exactly looking forward to).

Retaping bellows is a hideous task, I am part way through my second go and at least this time the tape came off easily but I am still scraping the old glue off, I am ~3/4 hours into it and still about another hour before I start retaping. It is a dirty/dusty/tedious horrible job but kind of satisfying when it is complete  ;)

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #55 on: November 09, 2010, 02:04:28 AM »

Would be worse than retaping bellows (which I'm not exactly looking forward to).

Retaping bellows is a hideous task, I am part way through my second go and at least this time the tape came off easily but I am still scraping the old glue off, I am ~3/4 hours into it and still about another hour before I start retaping. It is a dirty/dusty/tedious horrible job but kind of satisfying when it is complete  ;)

Well I've done a *lot* of cardboard modelling in my time, so I have a lot of patience with bits of paper and glue. I'm imagining it to be unpleasant though and am fully expecting to leave it to the holidays where I can spend an entire day or two on it.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: A series of holiday projects
« Reply #56 on: November 09, 2010, 02:58:15 AM »

Any more opinions on this? I'm starting to dissemble and clean reeds before revalving and rewaxing this weekend.

Hello Ukebert, this may come in a bit late, but you should probably look over this website to get some background on reed repair. It gives you an overview of the task at hand, and much useful and worthwhile information.

Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #57 on: November 09, 2010, 11:52:59 AM »

Any more opinions on this? I'm starting to dissemble and clean reeds before revalving and rewaxing this weekend.

Hello Ukebert, this may come in a bit late, but you should probably look over this website to get some background on reed repair. It gives you an overview of the task at hand, and much useful and worthwhile information.



It isn't late and thank you very much (:)
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: A series of holiday projects
« Reply #58 on: November 09, 2010, 02:23:10 PM »

That is a great site that I've never seen before. Thanks for posting J.W.

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #59 on: November 14, 2010, 12:57:24 AM »

Started today! Didn't get that much time, but managed to strip my 1 row of treble reeds, take what remained of the old valves off, cleaned and checked the clearances.

Theo's tip with the PCB polishing block works a treat by the way. Rust just disappears. The reed pan on the 1140 is pretty poor quality, when I was taking one of the pins out it took some of the pan with it. I've glued it back on, looks better now. The reed pinger from CGM (still haven't worked out what that is for) works very well at scraping off old wax, as it is thin at one end, so you can apply more pressure, but isn't sharp, so you don't scratch the pan/block.

Tomorrow aim is to revalve and rewax that one and hopefully tackle the bass end as well.
« Last Edit: November 14, 2010, 12:58:58 AM by ukebert »
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: 1 2 [3] 4 5 6 7   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal