Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 [6] 7   Go Down

Author Topic: A series of holiday projects  (Read 38050 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: A series of holiday projects
« Reply #100 on: December 10, 2010, 08:01:21 PM »

LOL - this is one of those occasions when one ponders the wisdom of a previous post...

I was trying to make a pun on "it sucks", but it's been a long day - just settle for air pressure, unless there is a way of only playing squeeze notes on a one row...

and I'm sure John K could provide a few more :-)
« Last Edit: December 10, 2010, 08:03:40 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #101 on: December 10, 2010, 08:57:53 PM »

Remember that there should be no force acting to pull the pallets away from the levers at any time.

Clearly you aren't studying physics!  There is inertia, as the lever accelerates the pad away from the board for a start!

Well yes, but then the pad is accelerated into the lever once the lever stops moving. You would get fatigue loading on the wax this way, but I'd be surprised if it would be significant in terms of the natural life of the wax (as it will go brittle eventually anyway). What else is there?

I hadn't thought of air pressure though. Again, I'd be surprised if it makes a difference. Time will tell.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #102 on: December 12, 2010, 02:21:44 AM »

Played the 1140 today. Treble side is sounding nice, very rounded sound. Bass end I'm not happy with. It feels sluggish and I have a suspicion that I've used too thick valves. I'm thinking of starting again. Plus my gluing was evidently done in a bit of a hurry, since it has spread to the tongues in some places.

I'm also considering abandoning the encaustic stylus. It worked a treat on the 1140, but the Welty's reedblocks mean that the reeds are just close enough together that I can't get the iron in between. I tried laying wax on the previous plate and immediately, before it dried, jamming the next plate in, but either that doesn't work very well or I'm not very good at doing it. If I try to fill in the gap afterwards, it just lays wax on top of the gap and leaves an air gap between that and the block. Surface tension :(

I think that in that case the best bet might be Charlie Marshall's brush method. I was wondering whether anyone had tried using one of those little wax heaters that they have on eBay for manicures. I don't know what temperature they go up to, but it would be a neat way of melting wax. Otherwise I'll have to mess around with dimmer switches with my old soldering iron I suppose, but that method has always seemed rather messy. Or use a spoon or one of those pen things. More research needed!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: A series of holiday projects
« Reply #103 on: December 12, 2010, 09:11:38 AM »

As a thought, you could try wrapping some wire around the bit of your iron. You might get enough heat transfer to get the wire into awkward spaces but have enough heat to flow the wax.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: A series of holiday projects
« Reply #104 on: December 12, 2010, 03:44:58 PM »

As a thought, you could try wrapping some wire around the bit of your iron. You might get enough heat transfer to get the wire into awkward spaces but have enough heat to flow the wax.

That works, I posted a photo on here a while ago. It's no good for getting wax between the reed plates on a Liliput, neither is Charlie's tuna tin and paintbrush method. The paint brush fluffs up when you dip it in the wax. I just made sure there was plenty of melted wax on the side of the next slot and put the next reed plate down quick before it got cold.
Logged
Bill of Old Radipole Village

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #105 on: December 12, 2010, 08:57:01 PM »

As a thought, you could try wrapping some wire around the bit of your iron. You might get enough heat transfer to get the wire into awkward spaces but have enough heat to flow the wax.

That works, I posted a photo on here a while ago. It's no good for getting wax between the reed plates on a Liliput, neither is Charlie's tuna tin and paintbrush method. The paint brush fluffs up when you dip it in the wax. I just made sure there was plenty of melted wax on the side of the next slot and put the next reed plate down quick before it got cold.

I have seen people do that, this seems to be a good idea. It's still a bit of a nuisance, as the only wax that I have is in blocks rather than sticks, but I'm sure that a knife will cure that. I am also home, so there is a chance that I might be able to find some copper wire in the shed (:)

Annoying re: Liliput, as my Imperial has the same size and orientation of reeds (I believe). Sounds like what I was doing on the Welty is the right way forward, I just need more practice! Apart from anything, the stylus heats the wax only just beyond it's melting point, so that it dries very quickly. If I were to make two trips with wax I'd need to be pretty sharpish with the next plate.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: A series of holiday projects
« Reply #106 on: December 12, 2010, 10:17:50 PM »

I had a similar problem with my soldering iron - the tip being too large and too thick to get good results. I simply took an old file to the tip, and tapered the end (about an inch from the tip) down to a couple of mm. I've had to wax a couple of boxes where the reeds were too close for even that tip to work, so I did the 'wrapped wire' trick. Worked alright for a single box, but it was a bit annoying compared to the regular method.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #107 on: December 13, 2010, 12:10:03 AM »

I had a similar problem with my soldering iron - the tip being too large and too thick to get good results. I simply took an old file to the tip, and tapered the end (about an inch from the tip) down to a couple of mm. I've had to wax a couple of boxes where the reeds were too close for even that tip to work, so I did the 'wrapped wire' trick. Worked alright for a single box, but it was a bit annoying compared to the regular method.

I thought of that, I have a spare tip, but For every mm you file down, you get less wax in the stylus. I will try it, I expect, but I'm fully expecting that it just won't be worth it.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

StupidFingers

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: A series of holiday projects
« Reply #108 on: December 16, 2010, 08:24:14 PM »

I'm also considering abandoning the encaustic stylus. It worked a treat on the 1140, but the Welty's reedblocks mean that the reeds are just close enough together that I can't get the iron in between. I tried laying wax on the previous plate and immediately, before it dried, jamming the next plate in, but either that doesn't work very well or I'm not very good at doing it. If I try to fill in the gap afterwards, it just lays wax on top of the gap and leaves an air gap between that and the block. Surface tension :(

Hi.

One of the bad habits I picked up from my father when using a soldering iron with electronics is the stripping of insulation off of wire using the tip of the iron (smells funny and is the sort of thing the health and safety guys would be pulling their hair out over if one were to do it in a working environment).  He decided to take the larger of the two soldering irons in his possession and make a modification.  To the outside of the element he strapped a half inch wide strip of thin metal leaving a tag sticking out.  Into this tag he cut a "V" notch.  When the iron was hot, it was then possible to push a piece of insulated wire down into the notch, twist, then pull thus baring the wire.

If the tag could get hot enough to melt plastic, then a similar arrangement (with the tag adapted for the purpose) might be useful in melting wax in the smaller gaps between reed plates where it is not possible to fit the tip.  There is still the problem of getting the wax in there in the first place, but you could at least gain access to wax that was already there such as with your "jamming" technique.

Of course, this is all theoretical and I haven't tried this myself (yet!) so would require some experimentation somewhere you're not going to cause any damage!
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #109 on: December 18, 2010, 12:27:32 PM »

Yesterday I decided that it would be quite possible to convert my Imperial to counterbass, as long as I didn't mind rebuilding a reedblock, building a new soundboard and rebuilding around 30% of the mechanism from scratch. Perhaps a bit of an ask :P

I do genuinely think though that 32 stradella with counterbass is possible for an instrument the size of a Liliput.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A series of holiday projects
« Reply #110 on: December 18, 2010, 04:17:52 PM »

Yesterday I decided that it would be quite possible to convert my Imperial to counterbass, as long as I didn't mind rebuilding a reedblock, building a new soundboard and rebuilding around 30% of the mechanism from scratch. Perhaps a bit of an ask :P

I do genuinely think though that 32 stradella with counterbass is possible for an instrument the size of a Liliput.

It should not be necessary to rebuild reedblocks and soundboard in a 32 bass Imperial, you have all the reeds there already, its just the mechanism that would have to be changed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #111 on: December 18, 2010, 06:13:19 PM »

Yesterday I decided that it would be quite possible to convert my Imperial to counterbass, as long as I didn't mind rebuilding a reedblock, building a new soundboard and rebuilding around 30% of the mechanism from scratch. Perhaps a bit of an ask :P

I do genuinely think though that 32 stradella with counterbass is possible for an instrument the size of a Liliput.

It should not be necessary to rebuild reedblocks and soundboard in a 32 bass Imperial, you have all the reeds there already, its just the mechanism that would have to be changed.

Nope, I've got all 12 for the chords, but converting to counterbass requires an extra four bass reeds... The point is that at present it is bass/major/minor/dominant, which is little better than a melodeon bass, even if it were to be converted to F/F# instead of Eb/E. So it only has 8 bass reeds :( It does have 3 voice bass, i.e. low, tonic and high tonic, the high tonic being taken from the chord reeds. I thought about scrapping the middle reeds and putting bass reeds in there instead, rebuilding the reedblock to accommodate them, but 1) the chambers of the bass reeds would technically have to be altered because the airflow would be different b) it would involve rebuilding the mechanism anyway and c) the soundboard doesn't have 2 holes, it has two holes overlapping. So it would need a new soundboard as well!

To fit all the reeds in and keep the three voice bass I think that it would need another reedblock, there isn't quite room to extend the current one. This would be OK I think, but would require slight alterations to the main mechanism to accommodate the extra levers. I think that you could use the original axle and housing if you only added three reeds, but not 4 :( The housing  for the axle is a little complex, but could be made less complex. The rest of the housing you could reuse. I'm not sure how you would couple the counterbass levers to the bass pads, since they are on a simple lever system that is then coupled to the tonic, rather than on a separate horizontal axle system like the bigger stradella boxes. Shouldn't be too difficult though. In order not to impede anything else, the key rods for the counterbass would need a dogleg almost immediately and then led vertically down in the gaps between the bass rods. This would mean that the rod material would have to be very stiff, because there would be a couple acting on it. I would be worried about space for the extra rods and pallets between the soundboard and the axles, shimming the axles back would work but would require recutting all of the chord activating rod things (running out of terminology). This is a limited stradella and so things are done slightly differently from a big box. As it is, recutting the bass rod things would be a necessity.

Most parts could be built in department. The big problem with building new reedblocks is that you would then need to move the air button, probably trying a linked pad system, like the Preciosa. This would probably require a new soundboard, since the current air button hole is right in the middle of the new reedblock. There are a few minor cracks in the soundboard anyway. The soundboard is fitted on a ledge it looks like and then glued in. Making it would be a nuisance, as department is geared up for metalwork rather than wood. I could make a metal soundboard I suppose, my Casali has one. Not sure how you would best glue that in though. That would be the way to do it, because I could then get the water cutter to cut it accurately. Making the new reedblock would be a right pain, although I could take the dimensions from the other one.

Conclusion is that it would almost be worth starting again from scratch :P But a fun thought experiment.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #112 on: December 28, 2010, 12:50:41 AM »

Quick update that I haven't done a lick of work since I got home, apart from some Engineering, which doesn't really count. However, I am resolved to finish the reed work for the Welty when I get back and start tuning it :o Wish me luck, I'm beginning to go through the old threads for a second time and make notes... I'm be interested to see how Telemorris gets on as well :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: A series of holiday projects
« Reply #113 on: December 28, 2010, 01:08:16 AM »

I am resolved to finish the reed work for the Welty when I get back and start tuning it :o Wish me luck, I'm beginning to go through the old threads for a second time and make notes... I'll be interested to see how Telemorris gets on as well :P

Yes! Good luck. I keep looking through the threads myself and finding advice hidden in unexpected places or threads. Keep us posted on your progress. I'm especially interested in what puzzles or problems you run into and how you resolve them, or what the forum wizards have to say. Keep going!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Martyn

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 455
  • Hohnerohner
    • Martyn White Melodeon Tuning and Repairs
Re: A series of holiday projects
« Reply #114 on: December 29, 2010, 11:50:43 AM »

OK, three questions:


Thirdly is there an easy way of stripping old pallet leather off pallets? It's a horrible job and I'm worried that I'm not making the surface as flat as it should be.

By far the easiest method I have found for removing old pallet facing leather is to get a margarine tub lid or something similar, pour a tiny amount of methylated spirit into it. Then all you need to do is to stand the pallets in it for about 10 seconds, take them out and leave them to stand for about a minute.
The old leather can then be easily peeled off. It takes about 10 minutes in total to do a two row box.

It is a good idea to put the stripped pallets into the tub and give them a short blast with a hair dryer to make sure they are dry before fitting the new facings.

Martyn
« Last Edit: December 29, 2010, 10:36:17 PM by martyn »
Logged
'Anything from a small repair to a full restoration'.
www.melodeonrepairs.co.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #115 on: December 29, 2010, 12:17:44 PM »

That's a good tip, thanks Martyn (:) I'll see about getting some spirits for the next one. Not sure where I'm going to get a margarine tub though, it takes me 7 weeks to get through one :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: A series of holiday projects
« Reply #116 on: December 29, 2010, 01:35:09 PM »

Not sure where I'm going to get a margarine tub though, it takes me 7 weeks to get through one :P
Buy the margarine anyway plus some nuts and seeds and then make some Blue Peter birdcake. You can use all the marge in one go then, as well as doing your bit for the local environment and wildlife.  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: A series of holiday projects
« Reply #117 on: December 29, 2010, 04:13:26 PM »

Not sure where I'm going to get a margarine tub though, it takes me 7 weeks to get through one :P
Buy the margarine anyway plus some nuts and seeds and then make some Blue Peter birdcake. You can use all the marge in one go then, as well as doing your bit for the local environment and wildlife.  (:)

But I don't have a garden! :P Maybe I'll swipe a margarine pot from home if we use one up before I go.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: A series of holiday projects
« Reply #118 on: December 29, 2010, 05:10:32 PM »

Not sure where I'm going to get a margarine tub though, it takes me 7 weeks to get through one :P
Buy the margarine anyway plus some nuts and seeds and then make some Blue Peter birdcake. You can use all the marge in one go then, as well as doing your bit for the local environment and wildlife.  (:)

But I don't have a garden! :P Maybe I'll swipe a margarine pot from home if we use one up before I go.

Can you not understand the simplest of instructions? :D
They quite clearly state that you should use the lid from a margerine (sic) tub.
This can be reused to protect any unused margarine after thorough washing if no cling-film is available.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: A series of holiday projects
« Reply #119 on: December 29, 2010, 05:15:57 PM »

I'd be interested to know the specific properties that margarine (other non-dairy spreads are available!) brings to the equation; why is ANY shallow plastic container not suitable? Why can I not use the lid from a container of, for instance, olives? Is there a margarine cartel secretly directing melodeon repairs? I think we should be told...... ;D
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: 1 2 3 4 5 [6] 7   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal