Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: CBA -----> B/C/C#  (Read 1657 times)

0 Members and 1 Guest are viewing this topic.

JimJ

  • Good talker
  • **
  • Offline Offline
  • Posts: 59
CBA -----> B/C/C#
« on: June 22, 2010, 03:26:14 PM »

I was just wondering if there was a major difference in the internals of a CBA vs a B/C/C# instrument.
I have seen several posts talking about putting a new bass end on a 3 row instrument to give the extra
basses. I was wondering if it might be easier to take something like a Hohner Nova II 48 and "just" swaping
out the treble reeds to melodeon style reeds to achieve the same results. Or is there more to the differences
than just the reeds?
Logged

waldoB

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Re: CBA -----> B/C/C#
« Reply #1 on: June 22, 2010, 03:40:34 PM »

I've been wondering the same thing. The five row CC as I understand it has the same reed set up as a three row, the extra two rows giving alternative fingering is achieved by linkage. Obviously the reeds are different, the BCA being bisonoric, the CC mono. A BCA can have the reeds changed to make a three row CC ( with large airbutton !! ). Need to talk to a friendly keyboard supplier.......
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: CBA -----> B/C/C#
« Reply #2 on: June 22, 2010, 03:57:26 PM »

 apparently 6 40 button Shand Morino's were factory b uilt  for Bells accordions of London as 3 row continental chromatics.  These were genuine Shand Morino's rather than ordinary morino's. Ivor Hyde has one, 2 apparently went to the USA and  ( a few years ago ) the location of the other 3 was unknown. I think Jimmy Shand junior may have one or he may have converted a normal shand morino to continental. Certainly he has recently converted a  c 1934   3 row  hohner 'l'organola BCC# to continental format.  It is therefore entirely logical that any 3 row continental can be converted the other way i.e. to BCC#, needing as well as reed changes the addition of a decent size airhole & airbar.

The cost may be too great for it to make sense (  compared to buying ana existing BCC#) unless you happent to have a good set of BCC# reeds in the cupboard!

george

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

JimJ

  • Good talker
  • **
  • Offline Offline
  • Posts: 59
Re: CBA -----> B/C/C#
« Reply #3 on: June 22, 2010, 06:31:13 PM »

Thanks --- after I posted the question I relized that the set of treble reeds is probably
the major cost of the instrument, so the conversion would likely not be cost effective.
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: CBA -----> B/C/C#
« Reply #4 on: June 22, 2010, 08:07:13 PM »

Many years ago I met someone who'd done exactly what you're asking, he had a small Hohner 3 row continental which had been converted to A/D/G melodeon right hand, to match what he was used to but add the complete bass.
Logged
Tony S
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal