Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Irish Dancemaster  (Read 4481 times)

0 Members and 1 Guest are viewing this topic.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Irish Dancemaster
« on: June 23, 2010, 02:38:02 AM »

Just today I had a nice visit with Michael Usui in Sarasota, where he worked some minor magic on my DG Pokerwork.  Very much recommend his tuning (nice tuning, dried out a wee bit), replace bass valves (the best/cheapest air management fix I could imagine), and best:  install treble bi-level pad plus re pad the treble pallets.  (I almost miss the clacking, but not quite).  Nice guy, good work, very convenient for the States.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Irish Dancemaster
« Reply #1 on: June 23, 2010, 02:55:54 AM »

Michael has worked on 4 of my boxes.  He has a Double Ray and a Globe of mine right now.  The DR he is fixing the Button action and tuning and the Globe he is totally refurbishing.  I highly recommend him.  He can talk your ears off when he talks about Accordions and the technical side of the trade.....that is what makes me like him.  I trust him with my boxes.  His work has always been top notch.  He ain't cheap though but when your the only game in town......  Steve I believe your in NC like me?
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

tedrick

  • Guest
Re: Irish Dancemaster
« Reply #2 on: June 23, 2010, 02:57:28 PM »

I started out on a dancemaster and really enjoyed it - it was a great box - I traded it in when I moved up to a new 80s flower grille Paolo 4 voice this past spring - Michael did a fantastic job tuning it - it still has the Paolo sound but with Binci reeds in it, it sounds like butter.

We are lucky to have him here in the states.

Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Irish Dancemaster
« Reply #3 on: June 23, 2010, 11:34:17 PM »

I have installed Dancemaster keyboards on both my Erica and my old presswood Pokerwork -- removeable top, felt padding installed beneath the levers. What a difference!

Bob

(And I have heard Reed's Paolo in person......it sounds great!)
Logged

Don Roberts

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
Re: Irish Dancemaster
« Reply #4 on: June 23, 2010, 11:44:08 PM »

I wonder why he is not building any new boxes at this time ? I was set to order a c#/d Sarasota model.
Could be he is out of components.
Logged
C#/D CBA  PA  GBH  SSP CD DVD BVD LS/MFT

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Irish Dancemaster
« Reply #5 on: June 24, 2010, 02:04:12 PM »

Could you give a more detailed description of the "Dancemaster" keyboards, photo perhaps. ?
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Irish Dancemaster
« Reply #6 on: June 24, 2010, 03:50:00 PM »

Not sure that I have any photos....I'll have to look around, but it won't be until I've been to the grocery store and cut the lawn, etc. etc.!

They are the same size and shape as the Hohner keyboards that they replace -- Lyre-shaped on the presswood, rounded corners on the Erica. The outer edge is several pieces of glued-up lumber, the back is thin ply glued in place, the top is thin ply with 8 or so small screws for removal.

The first one I ordered came with felt already in place. By the time I ordered the second, he'd stopped doing that, but it was a simple matter to glue in some furniture felt I bought at the local home store.

Hope that helps.

Bob
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Irish Dancemaster
« Reply #7 on: June 24, 2010, 04:31:05 PM »

The keyboards seem a tad expensive to me at $75 for the one piece and $95-$150 for the two piece, mind you that is installed

http://www.irishdancemaster.com/reedtuning.html

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Irish Dancemaster
« Reply #8 on: June 24, 2010, 06:21:11 PM »

A bit, perhaps, especially considering that mine were sent to me and I did the installing and adjusting myself. Still preferable to sending the whole box there for something that can be accomplished with relative ease at home. Plus, I was first able to fill the grain and enamel the whole thing in gloss black to match the original look.

Bob
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Irish Dancemaster
« Reply #9 on: June 24, 2010, 06:26:48 PM »

Could you give a more detailed description of the "Dancemaster" keyboards, photo perhaps. ?

Not sure that I have any photos....

 ??? Slight sense of déjà vu here.... look at the last post on this page and the following exchanges and you'll find the photos Jeff was looking for then (nine months ago) and now.  



« Last Edit: September 01, 2010, 03:17:21 PM by Steve Jones »
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Irish Dancemaster
« Reply #10 on: June 24, 2010, 06:55:03 PM »

I wonder why he is not building any new boxes at this time ? I was set to order a c#/d Sarasota model.
Could be he is out of components.

They're fettled Chinese boxes, not sure to what extent, so he's probably having supply problems with them.
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Irish Dancemaster
« Reply #11 on: June 24, 2010, 08:12:09 PM »

Wow, Steve......you're right! It is like deja vu, all over again!

Imagine me not remembering something.........

Now, where were we?

Bob
Logged

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Irish Dancemaster
« Reply #12 on: June 24, 2010, 11:09:20 PM »

Okay not sure if these are the keyboards people are talking about.  He installed what he called the Walsh keyboard on my souped up Hohner B/C  I am pretty happy with it and here it is with another lesser priced model called the Weideman Or something to that affect. Pictures below.
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Irish Dancemaster
« Reply #13 on: June 25, 2010, 01:13:53 AM »

Thanks for the  photos
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Irish Dancemaster
« Reply #14 on: June 25, 2010, 08:12:47 AM »

A keyboard like the upper one is quite easy to make yourself, the most difficult parts is drilling the aluminium plate for the top.  The body can just be cut from one piece of wood routed out to clear the mechanism.
Logged
Tony S

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Irish Dancemaster
« Reply #15 on: June 26, 2010, 04:19:52 AM »

Easy to make unless your like me, about as handy with a saw as I am short of patience for technical work as you describe.  I'm the last guy to pick up a saw and drill and try to make something like the above keyboard.  That's why I keep guys like Michael at Dancemaster busy.
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Irish Dancemaster
« Reply #16 on: June 26, 2010, 01:47:47 PM »

"The keyboards seem a tad expensive to me at $75 for the one piece and $95-$150 for the two piece, mind you that is installed"

Hello all--

Need a reality check.  What would be the price for custom work like this on the continent? and who would you recommend?


Thanks, regards,  Steve
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal