Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Moving reeds about  (Read 3117 times)

0 Members and 1 Guest are viewing this topic.

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Moving reeds about
« on: June 25, 2010, 01:25:08 PM »

Ok heres the situation: my melodeon has a Bb acidental at the top of the D row. The acidental is on the push. I want it to be on the pull.

It is a two voice box. Is it a siple case of un waxing 2 of the reeds and flipping them over?

thank you all in advance

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Moving reeds about
« Reply #1 on: June 25, 2010, 01:29:43 PM »

Simple answer - yes.

Longer answer - ideally you should use fresh wax, and the tuning will be slightly different with the reedplates inverted, whether that is a problem for you will depend on the sensitivity of your ear.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Re: Moving reeds about
« Reply #2 on: June 26, 2010, 12:09:45 PM »

Il have a word with my mate who wants to build melodeons, he could probably help me out

HallelujahAl

  • Guest
Re: Moving reeds about
« Reply #3 on: June 26, 2010, 12:38:15 PM »

Quote
Longer answer - ideally you should use fresh wax, and the tuning will be slightly different with the reedplates inverted, whether that is a problem for you will depend on the sensitivity of your ear.

Theo - how would you recommend doing this little job, should one not wish to undertake the longer route? Would gently loosening the wax with a soldering iron and then flipping be the way you'd do it?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Moving reeds about
« Reply #4 on: June 26, 2010, 03:34:18 PM »

Melting the wax first will lead to a mess with melted wax everywhere.  I'd just cut round the wax with a blunt knife before inserting the blade under the edge of the reedplate,  check there are no bits of wax in the way then flip the reed over and press it back into place.  In warm weather it may be sufficient to press the wax back into place with the fingers,  if that is not the case than run a cool soldering iron round the plate to melt the wax in contact with the metal.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Flanna

  • Prêtresse
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
  • Groupe electro folk aux sorcières "Flanna O'Tara"
Re: Moving reeds about
« Reply #5 on: June 27, 2010, 07:07:08 AM »

Highly technical here...

What kind of wax is used to fix reeds in place?
Logged
Yvus Pyrénées D/G ~ Wheatstone English Concertina ~ S-Wave Midi Concertina ~ Roland FR3B ~ Axis 64 ~ Roland Synthesizers

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Moving reeds about
« Reply #6 on: June 27, 2010, 08:12:04 AM »

Reed wax is a blend of beeswax, rosin and oil.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Moving reeds about
« Reply #7 on: June 27, 2010, 06:17:53 PM »

Reed wax is a blend of beeswax, rosin and oil.


Theo,

Having just inspected the bees and spent the usual time de propolising frames and then tools, gloves, hands, wife, kids, goldfish etc etc  ::) I wondered if you had ever tried or heard of incorporating any of natures least forgiving adhesive in reed wax ?

I was going to make some with my next batch of polish, perhaps I should make a trial stick or two with a little propolis added to experiment with, I have seen somewhere that it is/was used by fiddle makers but as part of the stopping or varnish rather than in the glue.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Moving reeds about
« Reply #8 on: June 27, 2010, 07:59:01 PM »

I used to keep bees too and I make my own wax from beeswax hoarded from my beekeeping days.   The resin in the reed wax mix needs to be completely dissolved in the wax,  I know that propolis does dissolve in wax to some extent so you may be onto something.   I suggest you try the ordinary reed wax first and then you have something to compare with if you experiment with propolis.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Moving reeds about
« Reply #9 on: June 28, 2010, 01:59:20 PM »

I'll give it a try Theo,

I've been using Meths to dissolve propolis out of wax scrapings and have recently discovered that Cellulose thinners is also a solvent for it, with the advantage over meths of total evaporation, another thing I am experimenting with it in is turners cement (shellac, wax, pitch being traditional contents)

Do you prefer olive or linseed as the oil  in your reed wax - seen both mentioned in recipes - or is that a trade secret ??

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Moving reeds about
« Reply #10 on: June 28, 2010, 03:12:48 PM »

I've used olive oil, and walnut oil, both seem equally effective.  I've not tried linseed oil, but I believe that is a 'drying' oil so it might result in wax that gradually becomes harder.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Moving reeds about
« Reply #11 on: June 28, 2010, 06:27:25 PM »

I use Walnut oil on woodturned items and had always regarded it as a drying oil Theo, it is thinner than either raw or boiled linseed but dries beautifully without skinning, one of the reasons I use it on fine grained hard woods.

I guess its a little thinner than Olive but if either were not fully combined with the wax and resin you would probably see it wicking into the wood of the reed beds over time ?

I found that a ballet suppliers on ebay yielded very good value resin, I bought a kilo and the seller and her other half both despatched a kilo !  When I called them to let them know I was told to keep it as a bonus for being honest  (:)

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Moving reeds about
« Reply #12 on: July 04, 2010, 01:08:02 AM »

Gentlemen--

Reading these posts is why I never have pulled my bellows pins without adult supervision.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal