Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Mini Melodeon Project  (Read 14774 times)

0 Members and 1 Guest are viewing this topic.

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Mini Melodeon Project
« on: June 29, 2010, 01:51:23 PM »

I am in the process of designing and building a mini one row melodeon. It will have 7 buttons (similar to a toy melodeon) however it will be in G and in the bottom octave, so suitable for most morris tunes. I have reached a bit snag though, although the ends are not possing any major problems, I have yet to figure out how I get make the bellows.

Those of you who saw my 'First self-build' thread will know I have attempted making bellows before. Although the result was not terrible, in was far from perfect. So now I am stuck trying to decide if I order bellows to be made in Italy, which will probably be very expensive, and would make the price of a finished mini melodeon very high (if I ever sell one). Or find pre folded card narrow enough (<30mm) for such bellows, and then try again at making them. Or maybe I could order some to be made in China?

Any suggestions?
Logged

HallelujahAl

  • Guest
Re: Mini Melodeon Project
« Reply #1 on: June 29, 2010, 04:54:56 PM »

What are the dimensions needed? Personally, I'd make my own set of bellows. The cost of a bespoke set from Italy would be quite high I imagine. And a small set of mini bellows has got to be quite easy to make. I would imagine that having got as far as you have with your melodeon project, you're pretty useful at woodwork, so it may be better to knock-up a wooden jig first.  I found that I had to make an adjustable jig for my concertina bellows that I make. I also would not use pre-folded card. Instead, cut your card to size and hinge together either with leather or adhesive cotton or both, like a concertina (except with four sides - not six ;)). You wouldn't even necessarily need metal corners if you bound the folds with leather (I've seen a number of Steirische accordions built this way), though Charlie Marshall would no doubt be able to furnish you with small enough metal corners.

Finally, let me know the dimensions as I do have an old mini-accordion that has a good set of bellows that could be cut off and transplanted if the sizes matched.
AL
Logged

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Mini Melodeon Project
« Reply #2 on: June 29, 2010, 05:51:48 PM »

The dimensions at present are 108/78, odd I know, but also tiny!

I tried the method you suggest, and it was a bit of a disaster I'm afraid. Though I am definetly better at sewing and woodwork than anything involving card!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Mini Melodeon Project
« Reply #3 on: June 29, 2010, 06:18:46 PM »

Not sure why Al would not use pre-folded card but every melodeon and accordion manufacturer does, so its worth considering.  For a concertina bellows with 5 or six fold its one thing to hinge all the card panels, but  melodeons usually have about 18 folds, and for a small one you might want more, and you need to keep the folds narrow too keep the overall dimensions small. In your position I would try folded card first, far fewer parts to put together.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Mini Melodeon Project
« Reply #4 on: June 29, 2010, 06:43:14 PM »

I which will probably be very expensive, and would make the price of a finished mini melodeon very high (if I ever sell one).

In that situation you have to think about the time involved, for a handmade object the cost of the parts and materials can be a surprisingly small percentage of the price. A set of top quality Italian bellows might look expensive but when you compare that to the cost of materials to make them yourself coupled with the time it'll take then buying some Italian bellows starts to look quite economical. If Doug Briggs didn't make all the parts himself then his boxes could be as much as nearly half the price.

I seem to recall that Carini could probably supply card folded to your specifications.
« Last Edit: June 29, 2010, 06:48:45 PM by WhatsAMelodeon? »
Logged

HallelujahAl

  • Guest
Re: Mini Melodeon Project
« Reply #5 on: June 29, 2010, 07:05:05 PM »

Quote
you need to keep the folds narrow too keep the overall dimensions small

That's the reason why I would hinge the cards rather than fold. A hinge creates a flatter fold (well, the way I do it, it does) - and in bellows of that size I'd reckon on folded card being one of two things - either too thick in which case the bellows becomes too stiff and unusuable; or the card stock being too thin and essentially resulting in bellows made out of little more than paper. Both of those two scenarios can be currently experienced in chinese made mini accordions - resulting in rubbish bellows very often. My way means that a reasonably strong card stock can be used, flatter thinner hinges, more bellows folds, and imho - better bellows.
 (:) BTW, after doing the geometry, I now chamfer the card ends that go into the fold to enable a really tight fit. I'm the only bellows maker I know who does that - though to be frank, I don't know too many bellows makers  :D

As to the melodeon world using folded card...I don't know why, but I figure that it's down to cost, as well as tradition etc? But if the best concertina bellows makers use the hinged method of construction - they would be horrified at the thought of using folded card - then it's good enough for me. I build my bellows in the most traditional way (though I don't use hide glue now as I can't stand the smell  :P) - but I'm still open to new ideas. Nah - actually...couldn't give a monkeys, I'll keep on keeping on ;D
AL
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Mini Melodeon Project
« Reply #6 on: June 29, 2010, 08:28:24 PM »

Nice to see someone else from Gods own county on here  ;D

Could you adapt / disguise a set of bellows from the Hawkins Bazaar squeeze box as a cheap(ish) short cut ?

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Mini Melodeon Project
« Reply #7 on: June 29, 2010, 10:23:01 PM »

I'm still inclined to go wit folded card. My attempt at Al's method for a 15 set was pretty terrible.

The box is going to be a similar size as the very small organettos made my Dino Baffett and alike, so it must be possible to make bellows for using the normal method of folding card. I was almost wondering if I could buy a set made for one of these boxes, but I think the price would be an issue. First I think I need to find a supplier if folded card narrow enough for my purposes.

As for converting toy melodeon bellows, they are both far too big (my box is about half the size) and very poor quality.

On a seperate note, what do people think to the idea of a mini melodeon both better quality than a toy, and yet in the right key and octave for English music? Sort of pocket one row?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Mini Melodeon Project
« Reply #8 on: June 29, 2010, 10:30:22 PM »

My Castagnari Mignon (about half way down the page)has the fingering in the normal G row octave with the two additional buttons doing the D/E and d/c# you need from the D row. I can play almost the entire morris repetoire on it and have used it as the sole instrument for dance outs.

GuyWyatt

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 303
Re: Mini Melodeon Project
« Reply #9 on: June 29, 2010, 10:53:01 PM »

Quote
My Castagnari Mignon
Oh dear, I really want one of those.
Guy
Logged

Ollie

  • Grumpy Young Git
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1900
    • Ollie King
Re: Mini Melodeon Project
« Reply #10 on: June 29, 2010, 11:01:01 PM »

I've never really seen their appeal; an expensive toy IMO.
Logged
Hohner Erika 12 bass D/G : Hohner Erika Bb/Eb : Hohner 1 row 4 stop D : Hohner Erica 9 bass D/G :

http://www.olliekingmusic.com/

Free-Reed Specialist, Hobgoblin Leeds

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Mini Melodeon Project
« Reply #11 on: June 30, 2010, 12:11:54 AM »

I dunno, I quite like the idea of a tiny melodeon that I can carry around with me. Much more likely to get a cheap toy melodeon though and fiddle with it than pay the money. And a preciosa is fairly portable anyway, indeed I can fit my one row at the bottom of my backpack.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Mini Melodeon Project
« Reply #12 on: June 30, 2010, 08:11:28 AM »

I've never really seen their appeal; an expensive toy IMO.

In some ways you are right, but on certain occasions it is invaluable:

Saddleworth Rushcart - Try walking and playing/carrying a normal melodeon for ~5 miles
My Bands Walking Holiday - Stick it in my day sack for tunes at the lunch time pub
Children (not one of your problems yet Ollie) - ON arriving home after work to be told by frazelled better half to "TAKE THE KIDS OUT FOR AN HOUR" used to grab it and take them down the park to run around whilst I learned new tunes.

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Mini Melodeon Project
« Reply #13 on: June 30, 2010, 10:40:08 AM »

I just liked the idea of having a box small enough to put in my bag while walking in the country, or out for the day. Its still in a prototype phase though so I will have to see how well the end result works!

It should have a few advantages over a toy or a mignon (or similar). One, the reeds are Italian, and its single voice so should be more responcive. Two, its in the lower octave, so not so squeeky as some of the Italian boxes yet no bigger. Finally its about half the size of a toy melodeon, so as tiny as I can make it!

But all this is subject to tinckering, and ironing out problems. So I guess I just have to wait and see if it actualy works.
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Mini Melodeon Project
« Reply #14 on: June 30, 2010, 01:11:37 PM »

I've only made one set of accordion bellows so I'm no expert, but they turned out decent. I knew I could do better next time.

Not sure what probs you had Emrock, but I hope this might be of interest.....

Folding the card wasn't a big issue, a plank, a few strips of wood and a couple of G clamps. I did it all on a Workmate but any bench or sturdy table would do. Without the Workmate jaws you'd need  a couple more clamps.

I was using grey board, not the most durable stuff but I think it would have a few years life and I wanted to get on with the job.
It helps if the board is very slightly but evenly damp. Leaving it in the cellar type damp rather than sprinkling with water, though an atomiser might help, then leave it a while.

Rather than type a thousand words, sketch attached

Clamp the card tight (two clamps) between the "crunching strip" and the "folding strip" and fold it away from you against the folding corner to a nice sharp right angle, run something hard and rounded along the fold to sharpen it. Take the card out and complete the fold likewise to 180%. Clamp that back in the jig and make the next fold.
Keep going many many times.

When done, clamp the whole thing tight for a few days. You should end up with a "stick" of folded card that stays it a tight folded block until you extend it. (Should be highly satisfying at this point!)

The fold depth will turn out slightly less than the height of your folding block, obviously enough.

I cut the folded card mitres on the bandsaw but a handsaw would do.

Next time round I'd try little pieces of cloth to hold the corners together initially, perhaps silk since I saw that mentioned somewhere.

Important to buy bellows corners that have the right measurement across the U channel. Mine were too wide and improvising a press arrangement to narrow the channel whilst keeping the right angle was a bit tedious.

Beyond that it's all just a bit of care and a lot of repetition!

Hope that helps!

Tom

(I've got some surplus grey board if anyone's interested, having gone over to the dark hexagonal side myself. PM if interested)
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Mini Melodeon Project
« Reply #15 on: June 30, 2010, 01:35:29 PM »

I just liked the idea of having a box small enough to put in my bag while walking in the country, or out for the day. Its still in a prototype phase though so I will have to see how well the end result works!

It should have a few advantages over a toy or a mignon (or similar). One, the reeds are Italian, and its single voice so should be more responcive. Two, its in the lower octave, so not so squeeky as some of the Italian boxes yet no bigger. Finally its about half the size of a toy melodeon, so as tiny as I can make it!

But all this is subject to tinckering, and ironing out problems. So I guess I just have to wait and see if it actualy works.

I like what you say about this. I'm working on a 5" 16 button Anglo for much the same reasons!
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Mini Melodeon Project
« Reply #16 on: June 30, 2010, 02:04:01 PM »

It should have a few advantages over a toy or a mignon (or similar). One, the reeds are Italian, and its single voice so should be more responsive. Two, its in the lower octave, so not so squeeky as some of the Italian boxes yet no bigger. Finally its about half the size of a toy melodeon, so as tiny as I can make it!

Not one to be picky but, my Mignon is Italian, has tipo a'mano reeds and is single voice.

There I can go and lie down now  ;)

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Mini Melodeon Project
« Reply #17 on: June 30, 2010, 03:34:01 PM »

Sorry Lester! When I mentioned italian reeds and single voice I was refering to a toy melodeon, i.e. my box will have all the advantages of a mignon type box over a toy, but also be in the correct key and octave for the music I play. I saw a tiny Dino box in Hobgoblin last year and fell in love, but eventually decided the £250 price tag was too much for a box in D (I'd prefer G) and that was quite squeeky. However I at least would pay that much for a box that size in the octave and key I want, hence the thought that there might be a small market for such a box.

Thanks for the info on making bellows Tom, its useful. The couple of issues I had when making a set with pre-folded card were:

1. Cutting the block of card accurately. I don't have a band saw, so I found it very difficult to cut straight. I tried a mitre saw, a tenon saw and even I very sharp knife, and all left the cut wonky.

2. The metal corners. Obviously they come opened wider than you want when they are in place, but I found if I squashed them with pliers then they lost their 90 degree angle, however I don't have a press either, so they too are a bit wonky.

I'm sure these issues can be overcome, but I'd be interested in your opinions.

Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Mini Melodeon Project
« Reply #18 on: June 30, 2010, 03:46:34 PM »



1. Cutting the block of card accurately. I don't have a band saw, so I found it very difficult to cut straight. I tried a mitre saw, a tenon saw and even I very sharp knife, and all left the cut wonky.

2. The metal corners. Obviously they come opened wider than you want when they are in place, but I found if I squashed them with pliers then they lost their 90 degree angle, however I don't have a press either, so they too are a bit wonky.


Understand the Chinee toy bellows are low quality, if oversize then this really is a mini box !

If you need to bandsaw a card stack I can help (Nr Wroxham) although the saw is not instanatly available (I ran out of space in my workshop years ago and often need to relocate stored stuff to access a particular tool)

As for the corners, did you try to crimp down each 'leg' separately ? perhaps a pair of triangular plates with a retaining upstand for the edge welded to a pair of waterpump pliers or mole grips (or a simple toggle press) might give a cleaner more repeatable result, again, may be able to assist when the time comes.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

GuyWyatt

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 303
Re: Mini Melodeon Project
« Reply #19 on: June 30, 2010, 04:11:19 PM »

Quote
I've never really seen their appeal; an expensive toy IMO.

Ollie, that is the point.
G
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal