Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Old Hohner  (Read 9631 times)

0 Members and 2 Guests are viewing this topic.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Old Hohner
« on: July 04, 2010, 04:43:19 PM »

One for the Hohner historians....

Yup, looks like I've contracted MAD too - just won this http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160451112155 and wondered if anyone can give me an idea of age / model / calorific value as firewood if empty or reeds have reverted to rust etc.

I'm intrigued as to why two of the bass buttons have been nicely lashed up with string but thought it was worth a punt..........

The font and style of transfers make me suspect this is probably 1920 / 30 ish but I sure someone will have a better idea.

Richard  :||:
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Hohner
« Reply #1 on: July 04, 2010, 04:57:35 PM »


The font and style of transfers make me suspect this is probably 1920 / 30 ish but I sure someone will have a better idea.

Richard  :||:

Older I think.  In "History Unfolds"  there are two instruments with the same metal corner bearing a portrait of M Hohner, and the same style of print, they are dated 1906 and 1907.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Old Hohner
« Reply #2 on: July 04, 2010, 05:56:10 PM »

Broadland Boy,

Seconding Theo's date estimate.  I didn't spot "steel reeds" labeling on this one, so it may well have brass reed tongues (common at this date).

If so, even after restoration it will be a little less responsive than a steel-reeded accordion. The brass reeds are also more prone to break. Some may already be broken.  Melodeon specialists may be able to provide replacements  (salvaged brass reeds from accordions much more wrecked than yours), or you could replace them with steel reeds.

I would keep the brass reeds (if that's what it has), if you appreciate this as a piece of history. Even if the brass reeds are replaced with steel, this accordion will never be a really speedy player. The brass reeds have a unique sweet tone quality lovely for playing around the house, songs, etc.

PG
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #3 on: July 04, 2010, 06:37:03 PM »

Thanks both,

It certainly looks fairly elderly, as for brass reeds, I'll be happy if it has a full set in whichever metal and not too much wind escaping the bellows ;) someone has had it apart as the ends are on back to front (well at least one of 'em is) and I don't play well enough for response to be an issue.

I have both a disintegrated harmonium and accordion reed set to hand, Theo put right the damage my late father did when he fitted some of them to his D/G pokerwork as he couldn't get on with the diatonics - I eventually found and re installed the originals but a couple were beyond re use IIRC.......

While I wouldn't deliberately do anything untoward, I hope it's not such a classic that it shouldn't really be tinkered with by a rank amateur melodeon mangler - no doubt if it is someone will blow the whistle.

Will let you know the condition when it arrives, I am hopeful it is better than a total wreck and if nothing else it looks like the exterior will respond to a little TLC,

Oh the fun of the auction, the expectation of the wait, the delight at the delivery, the disappointment on opening the package !

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Old Hohner
« Reply #4 on: July 06, 2010, 03:34:18 PM »

Theo posted a while back that fibreglass pens were the best method of tuning brass reeds. Good luck! :P
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #5 on: July 06, 2010, 04:33:54 PM »

Theo posted a while back that fibreglass pens were the best method of tuning brass reeds. Good luck! :P

Thanks for that, I have a few of them from my days working in stained glass.

While Kings College (Cambridge) chapel was being restored back in the '70s, 2 bays a year were worked on during the nice weather by the masons and plumbers, at the end of the nice weather four of us spent October through December (driving Norwich Cambridge daily) cleaning the Victorian and later smoke deposits off the windows using a glass fibre pen and a vast number of refills - I never did figure out what that job amounted to in acres but never since have I picked a g/f pen up without feeling the cold, damp, wind and incessant itching that the fine broken fibres caused :o

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Old Hohner
« Reply #6 on: July 06, 2010, 06:20:01 PM »

Theo posted a while back that fibreglass pens were the best method of tuning brass reeds. Good luck! :P

Thanks for that, I have a few of them from my days working in stained glass.

While Kings College (Cambridge) chapel was being restored back in the '70s, 2 bays a year were worked on during the nice weather by the masons and plumbers, at the end of the nice weather four of us spent October through December (driving Norwich Cambridge daily) cleaning the Victorian and later smoke deposits off the windows using a glass fibre pen and a vast number of refills - I never did figure out what that job amounted to in acres but never since have I picked a g/f pen up without feeling the cold, damp, wind and incessant itching that the fine broken fibres caused :o

Richard

I played a gig there a few weeks ago as dawn was breaking, we had a set from 0300 to 0500, playing contemporary arrangements of folk tunes with my Piano Trio (Whistle, piano, cello, me on piano). Really special experience. Also played in Trinity Great Hall as dawn was breaking, but that was for a ceilidh, so less sedate.

They've been cleaning up the stonework for years, I think that they have now done nearly all of one side.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #7 on: July 08, 2010, 07:03:48 PM »

Well, the beast arrived this afternoon, The decorative corner plates are lithographed tin plate - just like the old tinplate train stuff.
 
Bellows in remarkably good order given the age, weepy rather than leaky.M HOHNER  ACCORDEON in faded silver on one side Steel Bronze and something illegible on the other as far as I can make out ? ? ? ? ? ?EDAL    ??LOUIS 1904   ? ? ? ? ? AWARD, so not made before 1904 looks likely. in pencil inside on either side of the bellows, in pencil is X982 L at one end and X982 R on t'other. Ends hook on with nice shaped hooks engraved / pressed Hohner in joined up script, they all need replating.

Treble end missing pallet grille, mother of pearl buttons with steel c/s screws holding them on. In pencil on chin end 147 in neat pencil, not same scribe as the bellows. Reeds are 'steel bronze' (??) on individual zinc plates waxed and pinned with round headed bright tacks between reeds with L shaped clouts at the ends 2 voices reeds flat on endplate and again a number of missing leather valves but otherwise very clean.

Bass end fine other than a couple of broken pallet springs, the string wound round the buttons was evidently to shut them up, six individual chord plates and 4 base reeds - most needing leather valves.

Thats where the good news ends, the bad news is that 8 treble reeds 6 on one and 2 on t'other plate have been bent up through 90 degrees and one snapped off halfway down :( 

do you think I would be wasting my time trying to bend / planish them flat again ? It sounds quite mellow on the working reeds

I'd love to be able to see the worn inscription does anyone have one of these where this is legible ?

Oh and assuming 3 rd button holds good this far back it seems to be in C

Richard, both pleased and annoyed..........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Old Hohner
« Reply #8 on: July 08, 2010, 07:56:39 PM »

Broadland Boy,

If you want to go ahead and fix this up, you could look for another similar model (at the same great price!) and then you might have all the parts you need.

Or if you need brass reeds, M. Hohner portrait tin corners, etc., try the friendly U. K. dealers and repairmen on this site. If they don't have those vintage parts, I can probably find them for you in my stored parts.  Might have to wait until Autumn when I get up to my main storage space in the northeast (US).

I think you did great for what you paid, but as you see it will take a dedicated (and not strictly economically logical) investment of labor to restore this one.

They do sound great once the job is done (well).

Good luck!

Paul Groff
Miami, Florida, USA
« Last Edit: July 08, 2010, 08:00:25 PM by pgroff »
Logged

HallelujahAl

  • Guest
Re: Old Hohner
« Reply #9 on: July 08, 2010, 08:30:48 PM »

Quote
it will take a dedicated (and not strictly economically logical) investment of labor to restore this one.

Couldn't agree more - but that's the whole point isn't it? These instruments are a labour of love - and you simply can't quantify the effort and energy, time and money that will go into them. Go for it!
AL
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #10 on: July 08, 2010, 10:03:31 PM »

Thanks Paul and AL for your info and encouragement

The corner plates will clean and laquer, the 'shagreen' around the bellows end will probably come up nicely with some beeswax / turps, no idea on how to renovate the 'writing', the woodwork will probably polish up well enough.

As for the reeds, I'll wait for contrary opinions from melnetters but I have a drummond hand shaper in the workshop and wonder if I have the reeds off the plates and peg them to and  'stroke' them against a bit of ground steel plate with a bone burnishing tool to see what results, failing that I'll see what the accordion reeds yield size / hardness wise and in all probability even if I can them get something near it will probably need the Theo treatment before I'm satisfied....

Labour of love - yup but not what I'm used to, current steam engine project has required crankshaft main brgs metal sprayed and machined, big end bored out and new one made, new bearing brasses cast and machined, new piston and valve rods made and glands lined, I've lost count of the nuts and bolts I've made and the last big item before painting and re assembly was a pair of piston rings, made from the unconventional source of a 4 lb cast iron scale weight ;)

I'm not scared of metal working but I'm not used to this delicate springy stuff - I bought a cheap box to experiment with and hang the consequences and after a few hours in my hands have decided that it ought to be done properly !!

Oh for five minutes with the vandal that bent those reeds and my big spanner.........

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Hohner
« Reply #11 on: July 08, 2010, 10:09:51 PM »

Richard,  there's little to be lost in trying to straighten the reed tongues, because they are no use as they are!

 Are the reeds on long plates, or separate plates with just a suck and a blow reed on each plate?  And are the tongues steel or brass?  The plates I'm assuming are zinc.  If its separate plates and steel tongues it should be possible to find some old Hohner reeds on zinc plates that will give a similar sound to the ones you already have. If its long plates you have some filing and riveting to look forward to!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Old Hohner
« Reply #12 on: July 08, 2010, 10:21:02 PM »

Theo,

Richard wrote that the reeds were individual, pinned between, so I assumed they were what we call "indivdual" (2 tongues to a reedplate), and mentioned the words "Steel Bronze" which to me always means tongues that we generally call brass.

But then there was the "6 reeds broken on one plate" -- was the reedblock meant?

Richard,

Don't waste too much energy cursing a vandal. Usually the tongues in old accordions get bent when loose reedplates are rattling around inside the bellows.  Either the loose reedplate can get its tongues bent in the bellows or by the reedblocks, or the loose reedplate can get caught on a mounted reed and bend *its* reedtongues.

Unless you have more evidence of actual evil intent!

Paul

Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #13 on: July 09, 2010, 02:11:31 PM »



But then there was the "6 reeds broken on one plate" -- was the reedblock meant?


Unless you have more evidence of actual evil intent!

Paul


Theo / Paul,

Yes two bronze reeds to a zinc plate - plates stamped 'O'

My mistake in the terminology, there are two wooden reed beds for the two voices so I do not have a complete voice as some bent reeds are on both beds.

There is no way these have not been manually and individually bent up by finger or fingers unknown, as the tips of the tongues are pointing 90 degrees up from the plates - I've taken some pics but don't know yet how to attach them to a posting here.

Yes Theo, I see some rivetting in my near future  ::)  I'll let you know if I can get them flat again without breaking but I expect the work hardening will probably change their tone ? is this likely to be correctable ?

Richard

Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old Hohner
« Reply #14 on: July 09, 2010, 02:28:08 PM »

Plates stamped O is from one of the Klingenthal workshops I believe, someone here may know the makers name.

I don't know about how work hardening might affect the tone,  more likely it will just case the reed to break.

If you decide to have a go at making new tongues it's worth trying phosphor bronze rather than brass.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #15 on: July 09, 2010, 02:39:30 PM »

Plates stamped O is from one of the Klingenthal workshops I believe, someone here may know the makers name.

I don't know about how work hardening might affect the tone,  more likely it will just case the reed to break.

If you decide to have a go at making new tongues it's worth trying phosphor bronze rather than brass.

Thanks Theo,

The box is clearly marked Hohner (with tinplate litho'd M Hohner cornerplates) although some of the other markings are indistinct, was this a 'sub' workshop of theirs or would they have bought in parts or sub assemblies from a variety of specialists for assembly like the Black Forest clock makers did ? might explain the pencilled marks inside....

It'll be interesting to see just how much of the bend I can get out, I anticipate them breaking at the neck of the bend and I presume the material would initially have been rolled to work harden and consolidate.

I wonder why 'Steel Bronze' is mentioned, I know of no alloy, perhaps this was when steel was being introduced as the next great thing for reeds (although it had been used for musical box combs for a long time before) and it was just marketting hype - I guess we will never know.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Old Hohner
« Reply #16 on: July 09, 2010, 03:12:31 PM »

Regarding reedplates stamped 'O':

I've seen those in various boxes, from the 1920's and 1930's, and of many different names, tunings, and types - both steel on zink plates, and steel on brass plates.

I don't know about the brass on zink version, but the others are very nice reeds considering their age, and the sound is very pleasing. Not as powerful as newer (40's and beyond) reeds, but they have all had a sweet tone to them - those broad reeds just sounds very different than tapered reeds IMO.

I know that they were used in a good number of boxes from the 'International' factory - if they made the reeds or just bought them from someone else I do not know.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Old Hohner
« Reply #17 on: July 09, 2010, 04:04:46 PM »

Hi all,

Stephen Chambers answered my question about 1920s - 1930s zinc plate, steel tongue reeds with the "O" stamp. I will search for his answer and edit my post, but I think he suggested those reeds were made by the Bros. Dix.  I have seen some very nice sounding accordions that had reeds marked that way.

I have tried different kinds of brass and bronze to make concertina reed-tongues. I think the old recommendation is to start with a piece thicker than you need and hammer it to harden it. Anyway that's what I did and (after some experimentation to find what I liked the most) those reeds still sound and play very well, none broken yet.

PG

edited to add: here's that thread re: the Dix reeds:

http://forum.melodeon.net/index.php/topic,2807.0.html

« Last Edit: July 09, 2010, 04:14:02 PM by pgroff »
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #18 on: July 09, 2010, 11:05:46 PM »

If I've figured this out correctly there should be attached a few pics of the box for your delight and delectation, if nothing appears put it down to a day at melting point and a plague of mosquitos to spoil it now it's cooling down a bit !

I think they are self explanatory...........

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Old Hohner
« Reply #19 on: July 09, 2010, 11:18:59 PM »

Next pair
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal