Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Single Reed Plate  (Read 6396 times)

0 Members and 1 Guest are viewing this topic.

boaz-1990

  • Member
  • *
  • Offline Offline
  • Posts: 6
Single Reed Plate
« on: July 07, 2010, 02:30:27 PM »

Hello All this is my first post on this here forum!

I have recently bought an old one row for £16 as my first restoration project. The brand is unknown so unsure of the date or origins, the only clue is a Fleur de lys pattern on the bellows maybe suggesting France. The reeds are not separate and are on a single plate and i just wondered if anyone else had experienced similar reeds and if it gives some indication to worth or origins of the melodeon. Another interesting feature is the single stop which has what seems like a dog made of metal on it.

I will add pictures if people would like them.

Many Thanks

Boaz
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Single Reed Plate
« Reply #1 on: July 07, 2010, 10:26:53 PM »

In the days of old it was common practice to rivet the reeds  (bronze or brass, later also steel) on a single (zinc-)plate. As such it doesn't give any indication to neither origins nor value. It is still found in modern instruments (such as the Russian Bayan) and offers undisputed acoustic advantages, being rather unpractical in many other aspects.



Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Single Reed Plate
« Reply #2 on: July 07, 2010, 11:44:15 PM »

diatonix,

Can you tell us more about the acoustic advantages of the single long plate with multiple tongues?

FWIW my own unscientific opinion has been that some free-reed instruments built that way (even fairly budget models) can have a wonderfully musical tone quality. But I'm not sure why .... (? resonances carried by the plate over to the reed tongues whose pallets aren't open?)

PG

Logged

OldDog

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
Re: Single Reed Plate
« Reply #3 on: July 07, 2010, 11:51:55 PM »

Hi,
You might be able to identify the manufacturer of your accordion by his trademark - if any.  This is usually found on the metal corners of the boxes. I have a book - 'The Harmonica Makers of Germany and Austria' - which has a section devoted to a lot of trademarks. These are all harmonica manufacturers, but a lot of them also made accordions so their marks are here (Not all of the marks, but a lot). Otto Weidlich, for example, used a swan as well as the 'Empress' brand-name as his trademark. See what you can find. Maybe I can help. You said that there was the image of a dog on the pull-knob. F.A. Rauner used a bulldog standing facing left as his trademark.

Regards,
Paul N.
Tonawanda, NY
Logged
Over the hill? What hill?! I didn't see no hill!

boaz-1990

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: Single Reed Plate
« Reply #4 on: July 08, 2010, 08:02:07 AM »

Thanks for all your replies.

I'm glad that it can still have a good tone with a single reed plate as i was considering building new reed blocks and having separate reeds! I haven't had the chance to play it yet because the bellows were in a bad way but hope it has a good tone.

Also sadly the metal corners are just plain metal no markings, and also it is just the head of the dog. I will try and get a picture up of it, it may not be a dog at all!

Boaz
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Single Reed Plate
« Reply #5 on: July 08, 2010, 08:53:36 PM »

Hi pgroff,
a simple experiment will be quite revealing: Take a loose reed (i.e. frame with 2 reeds), preferably a larger one, hold it between thumb and index, then pluck one of the reeds. You will hear a sound, which disappears almost immediately and you will feel distinct vibrations in the hand that holds the reed. Put the same reed in a vice (without tightening too much or you will damage the frame) and pluck one of the reeds. The sound will be louder, more sustained. The reed will vibrate much longer.
A reed always tries to unload energy to its surroundings, instead of using the same energy to produce sound.  Usually reeds are fastened to the block with wax. In the beginning the average wax is still rather soft, thus absorbing more energy (resulting in less sound), as it hardens the box gets louder. Unfortunately most types of wax tend to get brittle after a certain number of years loosening its grip around the reed frame. The sound gets weaker, and there might be other disturbing side effects. That's the reason why reeds in high end instruments are kept in place with nails or screws. The main function of the wax in this case is to prevent air leaks. Sometimes there is no wax at all, and the manufacturer uses cork or leather instead (which may give way to other problems). The reed still tries to transmit energy to the reed blocks and other parts of the instrument, a vibrating reedblock means less sound and unregular beatings (tremolo). This is why it is so important to connect the blocks with a "bridge" (it. "traversina"). It also means that using "tone wood" in reed blocks or "sound"-boards has absolutely no effect... accordions are not violins.
The best way to force a reed not to disperse energy is to rivet all in a row on one long plate. This will have the same effect as the vice in the above mentioned experiment. There will be no need for wax, the plate rests on cork or leather (fastened with screws, nails or hooks). The problem: It's not user friendly at all. Should a reed break, even your local accordion technician may not be able to help you.
« Last Edit: July 08, 2010, 10:59:13 PM by diatonix »
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Single Reed Plate
« Reply #6 on: July 08, 2010, 09:57:51 PM »

diatonix,

Thank you for that very lucid and convincing explanation!

I had thought about the idea of extra mass in the reedplate.

But there also seems to be an extra "ring" in the whole instrument in some of these with long-plate reed banks, and I have wondered if some resonance might be contributed by sympathetic vibration in some reedtongues whose pallets are not open.  If I understand you, you are suggesting that with all the damping of vibration from the long plate, this is not likely.

I love the sound of long zinc plates, but steel reedtongues on long aluminum plates can have a unique sound also -- as in some cheap Beaver Brand 2-row vienna style accordions I have seen (these had 4 long aluminum plates on the melody side, 2 for each row).

Now on the "accordions are not violins" -- well, yes.  The soundboard on an accordion (or concertina) will function differently than the top of a violin, or guitar, or the very heavily braced soundboard of a piano. But many substitution experiments have convinced me that soundboard materials in concertinas and accordions can sometimes affect tone quality.  I may be wrong, but I am (fallibly) certain that I hear this.  I think this occurs not so much by the soundboard resonating, but by differentially reflecting and/or absorbing harmonics to color the basic sound produced by the reeds in the reedpan or on the reedblock -- so the soundboard (in conjunction with the action case and grillework) may act as a filter shaping the timbre of the instrument. Just my opinion.  But I have an open mind, and would be very interested to learn from your experience on this subject.

Paul Groff


« Last Edit: July 08, 2010, 10:00:56 PM by pgroff »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Single Reed Plate
« Reply #7 on: July 08, 2010, 10:04:07 PM »

...I think this occurs not so much by the soundboard resonating, but by differentially reflecting and/or absorbing harmonics to color the basic sound produced by the reeds in the reedpan or on the reedblock -- so the soundboard (in conjunction with the action case and grillework) may act as a filter shaping the timbre of the instrument...

Paul,  I've suspected something similar for a while now.   So in stringed instruments the carcase of the instrument can add to the sound produced by the strings, but in free-reed instruments the carcase can only subtract from the sound produce by the reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Single Reed Plate
« Reply #8 on: July 08, 2010, 10:17:33 PM »

To use an everyday example, if you can imagine someone talking to you from behind a closed wooden door and then a closed glass one...
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Single Reed Plate
« Reply #9 on: July 08, 2010, 10:57:12 PM »

On classic bandoneons the reeds are rivetted onto zinc plates.

Steve
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Single Reed Plate
« Reply #10 on: July 09, 2010, 03:11:13 AM »

There is an age old discussion about resonator guitars a nd the contribution made by the body and top woods

One camp says that premium backs and sides such as East Indian Rosewood and tops of Spruce make a major contribution to the sound of the instrument.

The other group says that the body of a resonator guitar is much like a speaker cabinet, and the woods make a minimal contribution; the majority of these builders use laminates and  that the size and shape of the cavity, the actual interior surface and the bafflles make more of a contribution.

The only down side I see to long plate reeds was maintenance and electrolosis.
I very much like the sound

I have also played instruments with aluminum long plates... lighter for sure but also a very pleasing sound

I would like to know when individual reed plates were first used and when long plates .. in general use not to include specialized instruments such as bandoneons... were discontinued.

« Last Edit: July 09, 2010, 02:20:29 PM by melodeon »
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Single Reed Plate
« Reply #11 on: July 09, 2010, 05:54:51 AM »

But many substitution experiments have convinced me that soundboard materials in concertinas and accordions can sometimes affect tone quality.  I may be wrong, but I am (fallibly) certain that I hear this.  I think this occurs not so much by the soundboard resonating, but by differentially reflecting and/or absorbing harmonics to color the basic sound produced by the reeds in the reedpan or on the reedblock -- so the soundboard (in conjunction with the action case and grillework) may act as a filter shaping the timbre of the instrument. Just my opinion.  But I have an open mind, and would be very interested to learn from your experience on this subject.

Paul, thanks for sharing this point of view.  Years ago, at a conference in NY (re: concertinas), Wim Wakker also made a very convincing case for this. 

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Single Reed Plate
« Reply #12 on: July 09, 2010, 02:21:55 PM »

Harry Geuns also believes that the surfaces, not so much the materials, makes and shape the sound/color.
Logged

C age ing

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 434
  • New fangled melodeon?
Re: Single Reed Plate
« Reply #13 on: July 11, 2010, 06:53:31 AM »

Harry Geuns also believes that the surfaces, not so much the materials, makes and shape the sound/color.

Do remember reading about acoustics somewhere and it mentioned eigentones. (apologies if it is misspelt.)

These resonances do affect the sound and are probably present in all instruments with physical boundaries around the sound generator.
OMG:-That means the lot.

Must go and lie down as the brain is hurting.
Logged
My Erika is as old as me. Luckily, it is not as decrepit.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Single Reed Plate
« Reply #14 on: February 01, 2014, 08:28:51 PM »

Is there a way you could add a resonator plate to clamp the reeds to the reed blocks with a gasket. The resonator plate would have holes for screws to clamp the plate tight against the reed blocks as though it were one block. It would add the weight of the plates to the box though.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Single Reed Plate
« Reply #15 on: February 02, 2014, 01:19:19 AM »

Is there a way you could add a resonator plate to clamp the reeds to the reed blocks with a gasket. The resonator plate would have holes for screws to clamp the plate tight against the reed blocks as though it were one block. It would add the weight of the plates to the box though.

The best of both worlds... i.e. as if reeds that are fixed to a single, long plate but are removable to allow maintenance? Tight tolerances but seems possible. I wonder how noticeable its effect would be, if any?

On a similar subject, I've been considering how practicable it would be to make a one-piece melodeon body, complete with reed blocks, on a 3D printer. Assembly would require screwing in the reed plates and attaching the bellows and keyboard action.

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Single Reed Plate
« Reply #16 on: February 02, 2014, 09:36:38 AM »

Is there a way you could add a resonator plate to clamp the reeds to the reed blocks with a gasket. The resonator plate would have holes for screws to clamp the plate tight against the reed blocks as though it were one block. It would add the weight of the plates to the box though.
     what a brilliant idea.  a single standard reedplate as only a small mass to resist movement.by locking all the reeds on one plate ,their combined mass can act together to stabilise all of them.
the old single zinc plates are a maintainance nightmare.      damaged reeds are difficult to repair. tuning on a normal tuning rig requires making a mockup of the wooden reedblock,to be able to sound individual reeds.     a friend showed me a old box where a modern reedplate had been glued on top of a broken reed on a long zinc plate.    the only downside i see to your resonator plate idea is the need for more gaskets.   simply adding mass to an existing set up may yield improvement.   could be back to the future.??? old idea's have a way coming around again.  brian...
Logged
whole life in the shropshire hills. on the slow track and enjoying it.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal