Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Tracing air leaks  (Read 11028 times)

0 Members and 1 Guest are viewing this topic.

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Tracing air leaks
« on: July 09, 2010, 08:56:31 AM »

Hi,

Does anyone have any tips, tricks or pointers for tracking down air leaks?  I'm speaking about examples where the box clearly leaks a bit more that it should with no keys depressed, but there's no obvious leak to be heard or felt.  It would also be great to know which potential sources of leaks are so easily fixed that its worth fixing them as a precaution and to eliminate them (for example would you always replace the bellows gasket on an older box?)

Ta in advance,  Tony S
Logged
Tony S

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tracing air leaks
« Reply #1 on: July 09, 2010, 09:07:30 AM »

Chasing air leaks is my least favourite sport!

I almost always replace the bellows gaskets on older boxes, because it's quick and easy to do and the material is inexpensive.  If it has leather gaskets you can often see dark patches where dust has been filtered out of leaking air! 

If there is nothing obvious then my suspicion always falls first on pallets,  on Hohner two rows you can get leaks through the screw holes that hold the treble fingerboard in place.   To check for leaking pallets, first remove grill or bass cover, then listen with your ear as close as possible to the pallets while compressing the bellows.  Another method is to dust powdered talc over the pallets and look for the little puff of powder when you squeeze the bellows.

 >:E :o If all else fails hold the complete instrument under water and look for bubbles  :o   >:E
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Tracing air leaks
« Reply #2 on: July 09, 2010, 09:47:19 AM »

Thanks.   I haven't replaced the bellows gasket, so I'll do that.   

I've just recovered the pallets and I've had to fiddle around with the action to get the keys all at the right height with the right travel.  The pallets are fitted with hot melt glue and I was intending to reheat each joint to make sure they're all sitting just right once its all settled down.   

The finger board screws are OK I think, but worth a proper check, ditto the strap bracket screws which I forgot to look at when the box was apart.   Its a Club II by the way, from the square pearloid era.
Logged
Tony S

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Tracing air leaks
« Reply #3 on: July 09, 2010, 10:07:12 AM »

for detecting small bellows or gasket leaks I find that the side of my face  is the most effctive draft detecting bit of my anatomy , just squeeze the bellows whilst slowly moving them round so that all parts  are a couple of inches away from your cheek  at some point in the exercise.

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

zubz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 388
Re: Tracing air leaks
« Reply #4 on: July 09, 2010, 10:14:11 AM »

for detecting small bellows or gasket leaks I find that the side of my face  is the most effctive draft detecting bit of my anatomy , just squeeze the bellows whilst slowly moving them round so that all parts  are a couple of inches away from your cheek  at some point in the exercise.

george

Thanks for the confirmation - I "guessed" this was what Rees was doing when he fixed mine at the weekend ... it was either that or he was smelling the wood (which I doubt!)  ;)

 (:)

Replaced gasket = much tighter playing. Thanks Rees!  :||:
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tracing air leaks
« Reply #5 on: July 09, 2010, 01:53:05 PM »

I've just recovered the pallets and I've had to fiddle around with the action to get the keys all at the right height with the right travel.  The pallets are fitted with hot melt glue and I was intending to reheat each joint to make sure they're all sitting just right once its all settled down.   

The finger board screws are OK I think, but worth a proper check, ditto the strap bracket screws which I forgot to look at when the box was apart.   Its a Club II by the way, from the square pearloid era.

What did you use as pallet facing material, and did you clean off all the old material and sand the pallet smooth?  I've seen chamois leather used with poor results.

Strap bracket screws don't usually go into the the interior, usually just into the area where the action is located so can't leak air.   The bellows strap fittings can leak.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Tracing air leaks
« Reply #6 on: July 09, 2010, 01:58:48 PM »

Hi,

Does anyone have any tips, tricks or pointers for tracking down air leaks?  I'm speaking about examples where the box clearly leaks a bit more that it should with no keys depressed, but there's no obvious leak to be heard or felt. 


Buy a £1.99 inc postage stethoscope from Ebay or such, when it arrives remove the diaphagm bit that goes on the patients body and substitute a bit of semi rigid nylon tubing (a foot or so up to say 6 mm dia) and this will if passed through an air leak create a sound in your lugs so you can isolate the point of leakage. Do not thrust onto and seal the hole under pressure as this will elevate the air pressure to your ears which may upset your eardrums if strong enough.

I use the fine application tube from a can of WD40 for tiny holes although have used this technique more on organs than boxes it identified the slight leakage resulting from a tiny bend in one of the spoon valves on my recent 4 stop not seating flat.

The cheapjack way is is just a bit of tube in one ear but if in a noisy environment plug the other with a bit of cotton wool  ;)


BTW, the mechanics stethoscopes used for detecting noises in cars etc do not generally convert as they have a sealed diaphragm with a separate exit for each ear tube .

I can't offer any advice on how to grow the extra arm or two needed if you don't have a bellowed test table........

Richard

Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Tracing air leaks
« Reply #7 on: July 09, 2010, 02:26:55 PM »

What did you use as pallet facing material, and did you clean off all the old material and sand the pallet smooth?  I've seen chamois leather used with poor results.

I used purpose-made felt/leather from CGM Musical, the stuff he describes as "as fitted to older Hohner instruments".   The old stuff came off pretty easily followed by a bit of scraping to get the old glue off then sanding by rubbing on some 220 grit on a flat surface.  It did occur to me that it would be very easy to round over the working surface of the pallet when sanding but hopefully I was careful enough.  Presumably the pallet would be better slightly concave rather than convex.

Regarding Chamois leather, I did wonder whether the stuff sold as "synthetic chamois" might work.  I assume that's some sort of thin dense foam, but presumably not closed-cell so may be porous.
Logged
Tony S

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: Tracing air leaks
« Reply #8 on: July 10, 2010, 08:12:05 PM »

Bellows gasket was the culprit, amazingly obvious once I found the leak.  Some foam draught excluder strip has fixed it meantime, till I get around to ordering the proper stuff.  Now it plays really nicely.   
Logged
Tony S

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Tracing air leaks
« Reply #9 on: August 30, 2012, 10:49:09 PM »

My old Koch two row has a leak at the corner of one of the bellows folds. Best way to plug this?

The gasket leaks. Is there a "special" accordion gasket material, or will any appropriate gasket material do?

A number of the treble palettes are leaking air because they don't seal properly (the casing under the palettes is a bit bowed, which may be part of the problem). Best way to fix this?

Thank you for any advice!  (:)
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Tracing air leaks
« Reply #10 on: August 30, 2012, 11:24:57 PM »

The gasket leaks. Is there a "special" accordion gasket material, or will any appropriate gasket material do?
Use the proper stuff:
http://www.theboxplace.co.uk/purchase/bellows/cat_12.html
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellows_Gasket.html
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Tracing air leaks
« Reply #11 on: August 31, 2012, 05:22:05 AM »

My old Koch two row has a leak at the corner of one of the bellows folds. Best way to plug this?

The gasket leaks. Is there a "special" accordion gasket material, or will any appropriate gasket material do?

A number of the treble palettes are leaking air because they don't seal properly (the casing under the palettes is a bit bowed, which may be part of the problem). Best way to fix this?

Thank you for any advice!  (:)

When you say "casing" do you mean the board on which the pallets rest and which carries the reedblocks on the inside? If so, and that's warped, you have a problem on your hands. There have been earlier discussions on dealing with a warped board (notice I'm avoiding calling it by any controversial name!) that may be worth running a search for.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Tracing air leaks
« Reply #12 on: August 31, 2012, 08:55:42 AM »

Using the face is the old cyclists trick for finding puncture holes where you haven't got any water!  The most sensitive part is just below your bottom lip (apparently...).

I often find that pallets leak a little on old boxes when you push the bellows together, 'cos the springs arent quite as strong as they used to be.

IMHO you'll always have slight leaks, which should be nothing to worry about. They help the box to breath!  ;)
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Tracing air leaks
« Reply #13 on: August 31, 2012, 08:57:30 AM »

Another thing on old hohners is the bellows frame corners, the wood parts and they`re notorious for leaking from there
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tracing air leaks
« Reply #14 on: August 31, 2012, 09:04:31 AM »

My latest triumph over air leaks was on an old Hohner where I finally found that the reed blocks had quite a bow on the mating face. Gentle sanding on a glass plate (good flat surface, available as a chopping board in Tesco) solved the problem.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tracing air leaks
« Reply #15 on: August 31, 2012, 09:36:27 AM »

My latest triumph over air leaks was on an old Hohner where I finally found that the reed blocks had quite a bow on the mating face. Gentle sanding on a glass plate (good flat surface, available as a chopping board in Tesco) solved the problem.

Standard part of renovation process.   Even more common is a warped fondo/soundboard/baseboard.  And that is much harder to fix.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Tracing air leaks
« Reply #16 on: August 31, 2012, 02:51:26 PM »

Well, notwithstanding the thread title, I'm not having a problem finding the leaks. I just need to know how to fix them!

I'm also not concerned about eliminating them completely - just reducing them to an acceptable level. The biggest leak is the one at the bellows corner. What should I use for that?

The palettes appear to leak at the end of the (metal) palette - ie furthest from the arm. I'm hoping bending the arms a little, & perhaps new palette felt will help.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Tracing air leaks
« Reply #17 on: August 31, 2012, 08:43:24 PM »

When you say bellows corner, are you referring to an outer corner where the leather gussets are? If you remove the bellows, open the folds, and shine a flashlite in the corner, can you see pinholes or tears in the leather gusset? Are there any other clues visible on the interior of the bellows: torn card, splits in paper or fabric liner, etc?
Logged

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: Tracing air leaks
« Reply #18 on: September 07, 2012, 11:35:35 PM »

The hole is at the point where the card meets the leather. You can see it in this photo. Other than that the bellows are in pretty decent shape, so I'd rather not replace the bellows if not necessary.

It's a very pretty vintage box & it has a lovely mellow sound (steel bronze reeds), but at the minute too much air is leaking to be able to play it properly as the bellows end up closed too quickly!
« Last Edit: September 07, 2012, 11:39:13 PM by AirTime »
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Tracing air leaks
« Reply #19 on: September 09, 2012, 01:52:12 PM »

David Leese, the concertina man, used to have some wonder material for parching bellows leaks from the inside. It's a thin synthetic material, cut to size and fix with pva glue. That should fettle it!
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal