Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Making reed wax  (Read 16056 times)

0 Members and 1 Guest are viewing this topic.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Making reed wax
« Reply #20 on: August 08, 2010, 10:39:35 PM »

I've just found another use for reedwax, champing down on a hard bit of pork rind tonight removed a filling, its settling nicely on its bed of reedwax and I've already got a dentist visit booked next week  (:)  :(  ??? ???

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Making reed wax
« Reply #21 on: August 08, 2010, 11:53:37 PM »

I use a stylus for hot wax art, it is obviously calibrated to melt wax! I did two complete reed replacement jobs (4-voice and 2-voice 1-row boxes) and it worked like a charm. Cost me only $27 in a craft store.


That sounds like a good tip to me (:) I've been wondering what the best method might be.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Making reed wax
« Reply #22 on: August 09, 2010, 03:43:41 AM »

I use a stylus for hot wax art, it is obviously calibrated to melt wax! I did two complete reed replacement jobs (4-voice and 2-voice 1-row boxes) and it worked like a charm. Cost me only $27 in a craft store.


That sounds like a good tip to me (:) I've been wondering what the best method might be.

 Just now got around to reading this great thread. As for a soldering iron, I use a small pencil type that has a copper tip that was round. Following advise from the late Richard Morse, I hammered the soft copper tip into a bit of a curved flat blade. (More surface area, fits into many diverse places). Since the heat level of the iron is fixed, I made a regulator by using an ordinary incandescent lighting dimmer. This is installed (along with a power receptacle) in an electrical box with an extension cord. The dimmer provides perfect control for the iron.
   I have read many cautionary tales about overheating the wax. I have the 'dimmer' set to heat the iron to the point where the wax will slightly smoke if not constantly fed new wax. Using the wax in stick form allows you to operate just as if you are 'soldering' the reeds in place and gives great control. If you need more or less heat, you simply tweak the dial.
   The dimmer-controlled receptacle also has a second function: it's a dandy speed control for a Dremel rotary tool. I never use a rotary tool on reeds to grind, but only to clean sometimes with the wire wheel or hard cotton buff. You can dial the speed down precisely to attain much better control, especially if you are routing out wooden parts. Looking forward for the results of these wax experiments! Thanks for sharing your findings!
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Making reed wax
« Reply #23 on: March 09, 2012, 08:07:24 PM »

A friend gave me  block of bees wax that I'm tempted to turn into reed wax. I understand the recipes but need to know what form of rosin or resin to use?

Is it basically the same type of rosin that is used for violin bows?

Is it the kind of resin that I've made by letting pure gum spirits of turpentine sit for a couple of months to thicken and then heat it to drive off the volatiles (used for varnish making)?

What's the original source material for this particular additive to reed wax?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Making reed wax
« Reply #24 on: February 25, 2017, 11:48:38 AM »

What is the disadvantage of using pure beeswax?
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Making reed wax
« Reply #25 on: February 25, 2017, 12:21:07 PM »

What is the disadvantage of using pure beeswax?
It's too soft to hold the reed plates firmly enough. Adding rosin makes the wax somewhat harder and stickier.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Making reed wax
« Reply #26 on: January 24, 2018, 05:43:48 PM »

Best way I have found to make sticks - Pour some molten wax onto a tray of hot water -  when cool you have a sheet of wax. Score it - chill it - snap it into sticks.

To make sticks I pour the wax into a flat container the slice with a sharp knife and straight edge.  The temperature has to be just right for this,  too cold and the wax is brittle and cracks as you cut,  too warm and the cut heals after the knife has passed.  A warm room temp seems to work so I'd guess about 20 to 25 C.

Which of the two is the better method I wonder? Maybe both are equally sound.
I guess I could experiment myself, but I am hoping that someone can convince me one way or the other.
I see that 'CGM Musical Services' supplies wax sticks that are ~6mm thick.
Is that a good size, or would thinner/thicker sticks work better?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Making reed wax
« Reply #27 on: January 24, 2018, 05:46:28 PM »

I see that 'CGM Musical Services' supplies wax sticks that are ~6mm thick.
Is that a good size, or would thinner/thicker sticks work better?

I've used many miles of Charlies wax sticks and they are fine. The size is a bit variable but that just means I have to feed faster/slower onto my waxing iron.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making reed wax
« Reply #28 on: January 24, 2018, 05:52:13 PM »

Pouring wax onto water to cool has the advantage of avoiding the whole slab of wax getting stuck to the bottom of a tray.   There is one thing to watch out for.  If you have hard water, even slightly hard,  hot beeswax will react with the lime in the water which denatures the wax.  To avoid this either use rainwater, or add a little citric acid to the water.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Making reed wax
« Reply #29 on: January 24, 2018, 10:45:22 PM »

I've mafecthe occasional bowl of gloop too. It seems to be less of a problem if you add the oil after the wax and rosin have melted together.

To make sticks I pour the wax into a flat container the slice with a sharp knife and straight edge.  The temperature has to be just right for this,  too cold and the wax is brittle and cracks as you cut,  too warm and the cut heals after the knife has passed.  A warm room temp seems to work so I'd guess about 20 to 25 C.

I have experimented with making a small quantity of reed wax for emergency repairs,, I read somewhere that some recipe's include Turpentine  and since resin dissolves fairly readily in turpentine, (must be genuine turpentine NOT white spirit) I dissolved the resin in turpentine first, allowing overnight for it to dissolve   then mixed in the already melted wax  . the result appeared to be successful, I have used it to do emergency re-attachments to loose reeds and so far none have failed the oldest being about year ago, and the wax appears to be unchanged ....of course only time will tell how successful this is.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Making reed wax
« Reply #30 on: January 25, 2018, 12:10:47 AM »

I've used many miles of Charlies wax sticks and they are fine.
That's good to know.

Pouring wax onto water to cool has the advantage of avoiding the whole slab of wax getting stuck to the bottom of a tray.   There is one thing to watch out for.  If you have hard water, even slightly hard,  hot beeswax will react with the lime in the water which denatures the wax.  To avoid this either use rainwater, or add a little citric acid to the water.
Thanks for the tip.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Making reed wax
« Reply #31 on: February 09, 2018, 01:36:00 PM »

Re Resin - When i made up my wax for fettling my 1040, I used beeswax bought in one of our local markets, but had no idea how to buy resin at all, so I begged scraps of old violin rosin from my middle sister and powdered it down with my kitchen mortar and pestle. The resultant wax came up perfect in use (thank you for the recipe Theo!)
For the waxing process, again I had no idea how to adapt my modeller's soldering iron at that time, so I used it as it was - VERY CAREFULLY. I held it away from the wax, just enough to get the stuff flowing properly. This did work, though my work grew progressively more sloppy as I worked up the board. I now know better - DO NOT TRY TO DO THIS AT HOME!  :Ph
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Making reed wax
« Reply #32 on: February 09, 2018, 02:14:58 PM »

You can find lots of rosin by searching for colophony powder. A non-thermostatic soldering iron through a cheap dimmer is an inexpensive way of melting wax, especially for repairs, without getting it hot enough to smoke (good ventilation etc...).

When I looked at the cost of making reed wax I didn't think it economic for small quantities. I will do it one day, just for the experience. Then it'll be back to Charlie.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Making reed wax
« Reply #33 on: February 09, 2018, 02:19:30 PM »

...A non-thermostatic soldering iron through a cheap dimmer is an inexpensive way of melting wax...


Aren't all commercially available soldering irons thermostatically controlled?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making reed wax
« Reply #34 on: February 09, 2018, 02:32:26 PM »

No.  They just heat up to a temperature where the heat lost to the surroundings balances the the heat output of the element - thermal equilibrium, and far too hot for melting wax.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Making reed wax
« Reply #35 on: February 09, 2018, 02:32:54 PM »

Mine is similar to this, from Maplin. It's an earlier model, they must have been doing these for years. There is a 25W version, too.

I have a "proper" thermostatic soldering iron but I don't know if it goes low enough. Anyway it's reserved for soldering.  (:)

PS I was given the dimmer control. As Theo says, too hot to use without one.

PPS it's like this, set at about half-way from memory.
« Last Edit: February 09, 2018, 02:45:03 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Making reed wax
« Reply #36 on: February 17, 2018, 06:36:37 AM »

My two cents on reed wax.

 I typically use a 60/40 Wax to rosin ratio. To this I add about 5% by volume Castor and Linseed oil. One of the old repair guys told me about the castor oil and how it helped adhesion. I melt the wax and pour most of it into a copper pan I have. I leave a little melted wax in the melting can and add the rosin (the rosin has really crappy thermal behavior and the wax helps it melt) i melt the rosin and add the castor and linseed oil to help it melt. When melted I pour the rosin into the wax in the copper pot and heat and stir it a bit to help it mix.
 As it cools i sometimes get the gummy sludge people spoke of. By running a stick around on the bottom you can collect it into a lump and remove it. My untested theory is that this is possibly honey sugar in the wax that by heating has been candied. It could also be oxidized rosin. Tasting or seeing if it dissolves in water would solve this mystery. It would also help you as this might throw your wax/rosin ratio off so you could adjust it if this happened.
 When the wax is still warm I cut out chunks from the pan and roll it like clay into 1/8" sticks about 2' long and roll them up and they go on a peg above the work stations.

I use a soldering iron (temp controlled now days) that I have hammered the tip flat on ,soldered with plumbing solder a flat brass blade, and then drilled through the tip and blade and copper riveted the two together in a couple of places.

My wax is dyed reddish as I get a lot of broken reeds from the Tex-Mex crowd and it helps me see what I did before.

I restored a vintage 1930's Wurlitzer and it had wax that would melt and flow like it was new. It had a distinctive smell when heated like old motor oil, perhaps a bit of a sulfur smell too. Would love that recipe.


 
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Making reed wax
« Reply #37 on: February 17, 2018, 08:11:37 AM »

Heating the wax and the rosin separately first, and getting the wax very hot first and adding the melted rosin to the wax seems to work. But not always. (:)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making reed wax
« Reply #38 on: February 17, 2018, 08:18:19 AM »

As it cools i sometimes get the gummy sludge people spoke of.

I've had that gummy sludge too.   Pretty sure it's not sugar left over from when the wax contained honey.  I used to keep bees on a larg-ish scale so I have a lot of experience of working with wax.  I used to heat the wax first over a water bath, then add the rosin and always git a lot of gummy sludge.  The last batch I made I heated the rosing first directly over the heat with no water bath so as to get a higher temperature.  The rosin melted completely and then I added the wax, and finally the oil.  Result no sludge at all.  My take on that is that the rosing needs more heat than I was using in order to get it fully melted. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Making reed wax
« Reply #39 on: February 17, 2018, 11:42:14 AM »

If you keep bees, you might have a steady supply of wax as a by-product, (?) in which case i can see the sense in blending your own reedwax. However, if you don't keep bees.......what is the benefit of blending your own (as the process seems to be quite awkward, time-taking and even possibly dangerous!) when it's readily available from the likes of the revered Mr Marshall?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal