Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Making reed wax  (Read 16037 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Making reed wax
« Reply #40 on: February 17, 2018, 10:36:48 PM »

Having costed it, and got the materials, in small quantities it comes out about even. I shall do it, to scratch the itch and to get the experience, then I will buy it from Charlie.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Making reed wax
« Reply #41 on: February 18, 2018, 08:39:02 AM »

As it cools i sometimes get the gummy sludge people spoke of.
 
Looks like we are going to have to taste some some to answer this question.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Making reed wax
« Reply #42 on: February 19, 2018, 12:15:35 AM »

As the O/P I'd have been happy to send a taster Kimric, other than I am out of stock and needing to make some more (last of the brew went to Edward to keep his overheads down.

I tried both raw linseed and olive oils, fresh, home brewed (and not over refined) beeswax and cheap and cheerful resin from a supplier to ballet, gymnastic and weightlifting exponents (which arrived twice as the wife had shipped it, then husband shipped it following day not realising) 50:50:5 wax, resin, oil by weight and poured onto warm water in an old grill pan and cut on a board with a pizza cutting wheel into thin strips around 3-4mm sqr.

Theo, Rees and Steve Freereeder had samples, Theo did my Liliput reeds with it but quite sensibly said he'd not risk an unproven wax on customers work, not sure if Rees tried or commented on it, Steve found it fine and had a second batch (but didn't buy the company  ;) ) and the only observation I recall was a nicer smell than Charlies, probably as a result of it being fresher wax. The hint of propolis version was not a success due to it globbing up on the iron but with more than a hint (2% ish)is a spectacularly good chucking wax for small turning jobs on the watch lathe.

Will try to remember when I make some more.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Making reed wax
« Reply #43 on: February 19, 2018, 04:56:37 AM »

"last of the brew went to Edward to keep his overheads down"

And very gratefully received it was! With nothing other than remelted old wax to compare it to, I was greatly impressed with Richard's concoction. It is very easy to use, flows wonderfully, and seems to be veeeery strong and sticky when it sets!
I'm going to have to buy some soon, though. Is Mr Marshall's the one to save up for?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Making reed wax
« Reply #44 on: February 19, 2018, 09:12:04 AM »

Another endorsement of Richard's wax sticks from me. I'm on the second batch he supplied me with now.
Flows easily, hardens off well and seems to hold the reed plates very firmly. Smells nice too. I guess it's the propolis.  (:)

Comparing it with wax sticks from Charlie Marshall, Richard's wax needs a slightly higher temperature setting (approx 10°C more) to achieve the best flow. Charlie's wax is paler in colour, a little softer to begin with, and perhaps needs a longer time to harden off.

Both types of wax do the job very well.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Making reed wax
« Reply #45 on: February 24, 2018, 12:59:08 PM »

Carnauba wax consists of fatty acid esters (80-85%), fatty alcohols (10-16%), acids (3-6%) and hydrocarbons (1-3%). It is around 20% esterified fatty diols, 10% methoxylated or hydroxylated cinnamic acid, and 6% hydroxylated fatty acids. Carnauba wax has a very high melting point of 82-86 °C (180-187 °F).
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Making reed wax
« Reply #46 on: February 28, 2018, 07:43:24 PM »

Edward - I think I could let you have some of mine if you like.It's cast as a shallow block, in a plastic tray, which makes it easy to cut off sticks with a sharp knife. PM me with your address and I will send it to you. It's only sitting taking up space in my "melodeon" tool box.  (:)
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Making reed wax
« Reply #47 on: February 28, 2018, 08:59:19 PM »

PM sent, thank you.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Making reed wax
« Reply #48 on: March 08, 2019, 08:33:23 PM »

Pouring wax onto water to cool has the advantage of avoiding the whole slab of wax getting stuck to the bottom of a tray.   There is one thing to watch out for.  If you have hard water, even slightly hard,  hot beeswax will react with the lime in the water which denatures the wax.  To avoid this either use rainwater, or add a little citric acid to the water.

After reading about wax  once again; 

Experiment:    an attempt to make sticks of wax

a plastic tray
hot water
citric acid
wax that just melted
And now  _  patience and wait   

But it look ok so far,    will put the  "cake"  in the fridge and later cut it into sticks   
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Frank Pallister

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Making reed wax
« Reply #49 on: March 09, 2019, 02:35:41 PM »

 50/50 beeswax and rosin  (no water bath should be used  ) heat in a pan on low heat keep an eye on it only needs to be hot enough to melt not cook chips !  when molten add tiny dash of olive oil mix and then pour onto prepared surface (do not get near any water )the surface i find ideal is to put a ceramic tile in  a freezer bag and pour out on this it will spread to thickness of around 1/8 inch (3 mm) before setting and can be popped in freezer then removed from the plastic surface of the freezer bag or left if prefered and sliced into thin wax sticks (1/8inch )  reeds waxed in 30 years ago with this still sound . i did try pouring onto water many years ago the worst thing you can do , the wax just spits everywhere in use ,perhaps if allowed to dry for a few months its ok but i wanted it quick
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making reed wax
« Reply #50 on: March 09, 2019, 03:07:18 PM »

I recommend melting the rosin first,  then adding the wax. Rosin has a higher melting point and I’ve sometimes had a mass of semi solid rosin that was difficult to combine with the melted wax.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal