Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Attaching a thumb strap  (Read 7080 times)

0 Members and 1 Guest are viewing this topic.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Attaching a thumb strap
« on: July 15, 2010, 03:13:53 PM »

My pokerwork has a plastic board with a small plastic square where the thumstrap would have been. I know I'm in the minority, but is it a big deal to purchase one and replace it? Sometimes I enjoy using one, especially on simple tunes, everything seems nice and secure there. I've used one before, and dpn't find it a big problem.

Anyway, how would I go about riveting it in? Seems plastic will give precarious results if not done properly. Is it easy to reattach one?
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Attaching a thumb strap
« Reply #1 on: July 15, 2010, 04:48:14 PM »

Charlie Marshall has suitable rivets in stock which work fine. I use strips of leather salvaged from old bass hand straps to make new ones.

Cut all of the old leather off with a scalpel and the rivets become loose. You can then saw off either head to slide them out the holes. I like to cut on the inside of the keyboard as any accidents wouldn't be noticeable this way.

Cut holes in your new strap and put the bolts through with the smart dome push on part on the outside.

Using a flat metal surface bang the inside of the rivets with a hammer to mate the 2 parts of the rivet together.
Logged

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Attaching a thumb strap
« Reply #2 on: July 16, 2010, 12:38:03 AM »

Thanks for reply LJC. I don't fully understand what is involved, I think I'll just go without.
Logged

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: Attaching a thumb strap
« Reply #3 on: July 16, 2010, 04:16:41 AM »

I buy secondhand leather belts from the S.A. or Vinnys op' shops and, cut to the required width etc..
I find that these are soft and stretched compared to new leather.
The rivets I buy from a hobby and craft store; they are 'double face rivets' (item #205 antique, size 10.5mm L) and, cost $4au for a packet of 10   (:)

jack
Logged
Jack Murphy    beyond the black stump

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Attaching a thumb strap
« Reply #4 on: July 16, 2010, 05:51:48 AM »

Aaaaaaaarrrrrgggghhhhh!
I can hear the sound of shattered plastic all the way to Oz.

Far easier and safer, imho, to use nuts and bolts, suitably washered and/or Locktite-ed.

The only thing to be careful of is that the bolts should not be too long to avoid fouling the underside of the button mechanism directly below (above?).

One thing I've noticed with older Hohners is that the rivets/screws are further away from the keyboard edge than on modern melodeons, and positioned better to avoid this fouling problem.

Not sure why they have been moved further out over the years. Possibly to save 1/4" or so of leather??? Wonder who won "employee of the month" for that one?
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Attaching a thumb strap
« Reply #5 on: July 16, 2010, 08:26:49 AM »

A simpler solution would be to buy and fit a new keyboard, these come with thumbstrap already fitted.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Attaching a thumb strap
« Reply #6 on: July 16, 2010, 09:06:01 AM »

Instead of rivets I use 'Chicago fasteners', those screws with a male and female part. The plastic they use for keyboards resemble bakelite are is very brittle... Careful!
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

old geezer

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 241
  • Hohner Melodeon
Re: Attaching a thumb strap
« Reply #7 on: July 16, 2010, 09:41:50 AM »

Aaaaaaaarrrrrgggghhhhh!

the factory seemed to get it ok  8)

nut screws washer an' bolts   ::)   ....tas
Logged
Jack Murphy    beyond the black stump

Mike Gott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 285
  • Melodeon and hairy arm
Re: Attaching a thumb strap
« Reply #8 on: July 16, 2010, 12:46:39 PM »

As a thumb strap(only) player - on one-rows, at least, I would go with the nut and bolt theory. I have tried using a snap-head rivet but it failed quite spectacularly mid tune in a pub once....

Using a nut and bolt also gives you the option to easily change or adjust the thumb strap itself. I bought some off-cuts of leather from a leatherworker some years ago and cut my own to suit when I need one. This leather is of course softer and more comfortable that the harder material that is used on belts. I'll send you a bit if you need some (send me a PM if you do).

Mike
Logged
"Traditional music was for entertainment, it wasn't for a further education class" (Bob Davenport)

Rivington Morris, Bolton, Lancashire.

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Attaching a thumb strap
« Reply #9 on: July 16, 2010, 11:55:28 PM »

And for heaven's sake, use smooth roundheaded bolts, if necessary filling in the sceewdriver slot! Your digits are probably going to be hitting that end at speed, unless you are unusually non-accident-prone.  :'(
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Attaching a thumb strap
« Reply #10 on: July 18, 2010, 05:01:58 PM »

A simpler solution would be to buy and fit a new keyboard, these come with thumbstrap already fitted.

This does seem easier. The unfortunate thing is, my keyboard has been improved with felts, buying a new one seems like taking quite a step back for the thumbstrap. Is uninstalling and reinstalling fairly intuitive? Any caveats? I've even thought about how some velcro attachment might work, and no, it doesn't seem like it would work to me either.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Attaching a thumb strap
« Reply #11 on: July 18, 2010, 11:49:49 PM »

To a Yorkshireman, there is no choice here. A new thumbstrap can be had for the price of a bit of leather from the scrapbox and bist from the  garage, whereas a new keyboard needs beer tokens!  :|glug
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Attaching a thumb strap
« Reply #12 on: October 12, 2010, 03:32:35 PM »

A simpler solution would be to buy and fit a new keyboard, these come with thumbstrap already fitted.

Sorry to resurrect this. So if I get the new keyboard, plastic for plastic, it's straightforward to replace? I just don't want a major surprise, and really want the thumbstrap..

Any caveats? I believe the new plastic is @ 20 usd, just not sure what to expect. It has the improved action, if I have to sacrifice it I'm willing to do that. This must seem nutty to some how much I prefer a thumbstrap!

Thanks.

Edit: I may take off the keyboard and send it off to Button Box , easier than shipping the whole melodeon.
« Last Edit: October 12, 2010, 03:48:02 PM by stevejay »
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Attaching a thumb strap
« Reply #13 on: October 12, 2010, 08:01:12 PM »

I knew there must be somebody somewhere who uses a thumbstrap!  My first job when I acquire a melodeon with one is to get rid of the damned thing. Still, whatever floats your boat............

I think if I were to want to fit a thumbstrap I'd go with the round-headed bolt & nut with a couple of washers, and either a locknut or a spot of Loctite.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Attaching a thumb strap
« Reply #14 on: October 12, 2010, 11:05:32 PM »

Pop rivets are a secure method and minimal risk of cracking the plastic.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Attaching a thumb strap
« Reply #15 on: October 13, 2010, 08:08:30 PM »

Not wanting to contradict the master but thats how father broke his KB Theo, used a high strength pop rivet that was tight in the hole and (in my view) too short, with a wedge ended core, it spread the rivet in the hole rather than pulling up a head.

I'd be inclined to use a washer both sides of the keyboard and on the outside of the strap if using pop rivets, even more inclined to use a round headed screw and nylock nut to let the strap move if wanted.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Attaching a thumb strap
« Reply #16 on: October 13, 2010, 08:58:48 PM »

As mentioned earlier, I found the 'Chicago fasteners' the best option: adjustable, removable, safe.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

gmatkin

  • Gavin Atkin
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 719
    • Julieandhersqueeze.com
Re: Attaching a thumb strap
« Reply #17 on: March 06, 2011, 08:08:40 PM »

I haven't got to the point of replacing my thumb straps, though no doubt I will. I'm still very much at the stage of working out how long/slack/tight/ rigid they should be, and experimenting with sewing up the ends to make them a little closer.

I've recently come to think that the combination of quite stiff but comfortably shaped is the right one - and that that's not much like the ones Hohner supply.

Gavin

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.
Re: Attaching a thumb strap
« Reply #18 on: March 07, 2011, 02:30:27 PM »

I made a repair once to a pokerwork thumbstrap.  I used a standard round headed phillips screw, and screwed it into a wooden block which I had glued underneath and inside the keyboard.  This meant that I could fit or remove the thumstrap as and when a whim took me.
Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

Accordion Dave

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
Re: Attaching a thumb strap
« Reply #19 on: March 07, 2011, 10:52:41 PM »

New keyboard....

I have a 2-row Hohner that has the wood worn away between the most played buttons. There are gaps where there used to be wood.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal