Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Screw that!  (Read 4017 times)

0 Members and 1 Guest are viewing this topic.

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Screw that!
« on: July 21, 2010, 06:48:09 PM »

Right, I hate waxing so when I get round to servicing my Dony and making a second set of reedblocks I'm going to pin the reeds down instead of waxing them.

It'd be a good idea to ask a couple of questions first though. Firstly what's the preferred type of leather for the gaskets and can anyone recommend a good source for it?. Secondly, are the screws ordinary woodscrews, (with washers?), from general sources or are they some kind of special accordion reed screws that are more suitable for a reason that hasn't occured to me?. The only examples of pinned reeds I've seen firsthand on older posh Hohners and the Jorgina I used to own both used nails and I do have some proper Italian reed nails with rifled shafts that I've used on Hohner bass reeds but screws seem a much better way to go.
« Last Edit: July 21, 2010, 11:01:24 PM by Andy Simpson »
Logged

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Screw that!
« Reply #1 on: July 21, 2010, 07:12:43 PM »

On the EATMT melodeon building workshop the stuff we used was called olivichi (olivicci?). It came as a large sheet we cut strips from. It is self adhesive with a backing you peel off. It's a bit like a cross between cork and thin leather. I don't know where it came from, possibly Italy. The screws used were No 2 x 9.5mm pozi head self tappers, with slightly wider heads than others I've bought, 4.5mm instead of 3.9mm.
Logged
Bill of Old Radipole Village

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Screw that!
« Reply #2 on: July 21, 2010, 07:28:58 PM »

It came as a large sheet we cut strips from. It is self adhesive with a backing you peel off.

WE cut into strips, I don't think so, well not the bulk of it anyway   ;D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Screw that!
« Reply #3 on: July 21, 2010, 09:52:23 PM »

Olovici adesividado and the correct screws are both available from Carini di Carini in Castelfidardo, Italy.

 Carini DE.NA. srl
60022, Castelfidardo
Italia
Telefono: +39 071 780961
Fax: +39 071 780757
Order from: Telefono: +39 071 780961
Order from: Fax: +39 071 780757
Posta elettronica: carinidena@virgilio.it
http://www.carinidena.com

Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

**DTN**

  • Derek The Nutter
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 472
  • Derek The Nutter
Re: Screw that!
« Reply #4 on: July 21, 2010, 10:14:30 PM »

Right, I hate waxing so when I get round to servicing my Dony and making a second set of reedblocks I'm going to pin the reeds down instead of waxing them.

I broke my reed blocks in my Dony .... Held together by glue now! ... so if ever you feel the need to throw away your reed blocks..... Hehe! ...think of me! ;D ;D ;D ;D
DTN
Logged
All the gear and no idea! .... DTN   "Hampshire UK"

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Screw that!
« Reply #5 on: July 21, 2010, 11:18:33 PM »

Ta very muchly Bill and Rees, seems an email to Carini is in order, what exactly should I ask for when ordering the screws?, I can imagine some confusion arising on that one...and is there much point emailing them now or do they go to sleep for July and August like the rest of Italy?. ;D

« Last Edit: July 21, 2010, 11:36:00 PM by Andy Simpson »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Screw that!
« Reply #6 on: July 21, 2010, 11:29:06 PM »

E-mail is best. They may still be about.
I can't remember the name of the screws. I'll see if I can dig out the invoice and get back to you.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Screw that!
« Reply #7 on: July 21, 2010, 11:56:06 PM »

Here are the details from my Carini invoice.
I use 10mm and 16mm screws. I have included details of both.

4510. OLOVISC 7/10 H 180 ADESIV (gasket, sold by the square metre)
5148. VITI CAVAGNOLO CORTE (these are the 10mm screws)
5150. VITI OTTONATE 1.6 x 8
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Screw that!
« Reply #8 on: July 22, 2010, 12:02:39 AM »

Aha!, catalogue numbers to boot, what a leg-end you are Mr Wesson. If I bump into you at one of Sidmouth's fine public houses I'll buy you a pint....did I mention that as well as changing the reedblocks on my Dony from waxed to screwed I also intend to embrace teetotalism for the first week of August?. ;D
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Screw that!
« Reply #9 on: July 22, 2010, 12:27:26 AM »

yeah, sure!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Screw that!
« Reply #10 on: July 22, 2010, 06:51:58 PM »

It came as a large sheet we cut strips from. It is self adhesive with a backing you peel off.

WE cut into strips, I don't think so, well not the bulk of it anyway   ;D

Somebody was bent over a hot Stanley knife, was it you? I was an assistant knob screwer  ;D
Logged
Bill of Old Radipole Village

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Screw that!
« Reply #11 on: July 22, 2010, 08:29:02 PM »

It came as a large sheet we cut strips from. It is self adhesive with a backing you peel off.

WE cut into strips, I don't think so, well not the bulk of it anyway   ;D

Somebody was bent over a hot Stanley knife, was it you? I was an assistant knob screwer  ;D

Team work will always get it done, so I'm told.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal