Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: grey 'marble' pattern plastic / celluloid availability  (Read 2209 times)

0 Members and 1 Guest are viewing this topic.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
grey 'marble' pattern plastic / celluloid availability
« on: July 21, 2010, 11:55:06 PM »

Latest MAD artifact arrived today, described as 'small' it has turned out to be miniature (sort of size that Emrock was planning IIRC)

Vital stats are:- 1 row ten button in C with two bass buttons, one either side of the air bleed on the LH front.

Keyboard stamped 'Germany', top (or bottom if talking note frequency) button missing, nice simple pattern fretted wood pallet cover with drilled equivalent over bass end.

7.5" x 4.25" over ends / bellows, which are 10 fold, when closed over ends its 7" and 9.5" long including keyboard.

Everything plays (although my great paws are rather big for it) its not far out of tune and sounds quite sweet - like an  overgrown mouth organ which is not surprising.

Internals yet to be investigated, I'm almost ready to start tuning the ancient Hohner - just got to bend and re temper a swiss file).

The ends where a Pokerwork has its decoration and keyboard are covered with a grey marble like pattern plastic which I guess is some sort of celluloid ? (haven't tried a match on it yet) and the keyboard end has been damaged with all the front and most the top and bottom plastic torn off, as I've seen this sort of finish on some of the Hohner club types is it a material which is currently available ?  I doubt a match is likely so would need enough for 2 identical 40 mm strips 24" long - sorry about the mixed units but I've got MAD so you should make allowances :)  and 5 x 7 for the keyboard.

If not available, it looks like the underlying wood may be beech so a strip, scrape and oil would probably stiill result in a nice little box, which I presume is a kiddy size product but nicely made (the corners are mitred BTW)

It has the look of 1950's / 60's school furniture, but it doesn't look quite as cheap and cheerful as the current mini melodeons - I'll pop up a piccy when I get the chance.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: grey 'marble' pattern plastic / celluloid availability
« Reply #1 on: July 22, 2010, 08:43:40 AM »

Celluloid covered Hohners are usually built of plywood.

The marled material is known as pearloid by those in the know, or 'mother of toilet seat" by the lower orders.
 I think I have some grey pearloid.  To prepare it for applying to a box it should be soaked in a mixture of acetone and water to soften it. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: grey 'marble' pattern plastic / celluloid availability
« Reply #2 on: July 22, 2010, 01:54:58 PM »

Celluloid covered Hohners are usually built of plywood.

The marled material is known as pearloid by those in the know, or 'mother of toilet seat" by the lower orders.
 I think I have some grey pearloid.  To prepare it for applying to a box it should be soaked in a mixture of acetone and water to soften it. 

Thanks Theo, twice in fact, once for the identification of pearloid and once for making me dry out my keyboard, I'd just taken a swig of tea when I got to 'mother of toilet seat' and the inevitable happened :P 
(LdT, I've seen several similar comments, surely this should have a unique to melnet emote?)

Amongst my battery of solvents, abuse for the use of, Acetone does not currently feature, I had wondered if a hot air gun or its ancestral equivalent might have been used to bend this stuff over a contact adhesive, the wrap round on the keyboard edge is very tight. The box does appear to be tree rather than plywood and there is a layer of thin paper under the pearloid, which has a mother of pearl lustre in it and in daylight, also traces of green rather than grey.


If you find sufficient in your stores, let me know and I'll give you a bell to organise purchase.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: grey 'marble' pattern plastic / celluloid availability
« Reply #3 on: July 22, 2010, 02:26:11 PM »

Amongst my battery of solvents, abuse for the use of, Acetone does not currently feature, I had wondered if a hot air gun or its ancestral equivalent might have been used to bend this stuff over a contact adhesive, the wrap round on the keyboard edge is very tight.

You can see how it's applied about a minute into this video....

http://www.youtube.com/watch?v=rYsSifiDapo
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: grey 'marble' pattern plastic / celluloid availability
« Reply #4 on: July 22, 2010, 03:47:29 PM »

Quote
...The box does appear to be tree rather than plywood and there is a layer of thin paper under the pearloid, which has a mother of pearl lustre in it and in daylight, also traces of green rather than grey...

That's funny, you have to wonder about someone these old Hohner colors.. I have a 3-voice Club which I believe was built in 1939 (I met someone online who has the same box and he says that Morino built his in that year. Plus someone scribbled that date on the blocks of mine).

It's grey, as you can see (feldgrau?  :|glug). But when I unscrewed the keyboard cover to have a look underneath, I found that the underside of the celluloid cover was bright green! I guess the exposure to ambient sunlight over 70+ years faded the color, like an old car. I'm halfway tempted to take a cabinet scraper to it to see if it would come back, but halfway more sensible than that...

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: grey 'marble' pattern plastic / celluloid availability
« Reply #5 on: July 22, 2010, 09:22:46 PM »

Thanks Andy & cpsmart,

Will have a look at that Utoob next time I have the laptop near a broadband network.


Instead of a scraper, why not try a mild abrasive like silvo, T cut or similar paint / laquer cutting compound, if it is a surface effect you might rejuvenate it while keeping a polished surface, in fact, (if I remember that is) once I have 'totalled' the remains from this box I'll give it a try and report back on results - might need a nudge to remember

Now what was I going to do ??

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal