Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: faster action  (Read 10415 times)

0 Members and 1 Guest are viewing this topic.

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
faster action
« on: July 29, 2010, 09:35:03 PM »

does any one know of any easy peasy tricks to make the trebble action quicker? i can play repeated notes alot quicker on one box than i can on the other, any ideas?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: faster action
« Reply #1 on: July 29, 2010, 10:09:36 PM »

It could be mechanical (change the spring rating) but the answer's much much more likely to be new, better reeds. If there's one obvious difference between good reeds and not so good reeds it's speed of response.

It's also possible that you can get an improvement by expert tweaking of the reeds and possibly replacing the valves if they aren't performing well. Valves that don't close will certainly slow the action of a reed.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

HallelujahAl

  • Guest
Re: faster action
« Reply #2 on: July 29, 2010, 10:16:54 PM »

 
Quote
Valves that don't close will certainly slow the action of a reed.
yep - never underestimate the importance of valve performance, in some ways they're critical.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: faster action
« Reply #3 on: July 29, 2010, 10:18:20 PM »

Somewhere either on this or the old forum site I found a link to some photos posted by Theo showing the method he uses to restrict button movement on Hohners so they don't vanish down the rabbit hole - may not make the reeds speak any quicker but may assist your speed of using them unless you know you're not over pressing -  Are the springs stronger or quicker acting on the faster box ??

I shall have a go at mine (button restriction) once the current restoration job is finished, unfortunately I suspect this will now include all new bass end springs and (if re leathering the pallets does not improve matters) the treble end too :(

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: faster action
« Reply #4 on: July 29, 2010, 10:47:01 PM »

I've come to the conclusion that if you don't down want your fingers disappearing down the "rabbit holes" on a Hohner melodeon, the  following is best method.

Just don't do it.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: faster action
« Reply #5 on: July 29, 2010, 10:54:20 PM »

I've come to the conclusion that if you don't down want your fingers disappearing down the "rabbit holes" on a Hohner melodeon, the  following is best method.

Just don't do it.

Right on. It never did Tony Hall any harm.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: faster action
« Reply #6 on: July 29, 2010, 11:35:18 PM »

I've come to the conclusion that if you don't down want your fingers disappearing down the "rabbit holes" on a Hohner melodeon, the  following is best method.

Just don't do it.

Right on. It never did Tony Hall any harm.

Andrew
I appreciate that finger control is high on the agenda when it comes to the right hand side and that sufficient practice and experience may allow a 'gossamer touch' to develop, as someone with a more agricultural touch, trying to play both one and two row without thumbstrap and generally only a RH shoulderstrap I could see the the buttons bottoming no further down than enough to spill adequate air through the reeds as also being beneficial for holding the keyboard better, on that basis is this something I ought to bother doing?

Rees, as for Tony Hall, yes agreed, but who knows what fragments of old kipper crates and bacca tins lurk under his keyboards - unless of course you are the 'who' who has been there and seen all (I'll understand if this is 'seal of the confessional' stuff)  ???

Good night one and all - Richard (who strangely can't summon to mind an appropriate fish pun, or even an inappropriate one come to that)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: faster action
« Reply #7 on: July 29, 2010, 11:46:59 PM »

Somewhere either on this or the old forum site I found a link to some photos posted by Theo showing the method he uses to restrict button movement on Hohners so they don't vanish down the rabbit hole - may not make the reeds speak any quicker but may assist your speed of using them unless you know you're not over pressing -  Are the springs stronger or quicker acting on the faster box ??

I shall have a go at mine (button restriction) once the current restoration job is finished, unfortunately I suspect this will now include all new bass end springs and (if re leathering the pallets does not improve matters) the treble end too :(

Richard
The link to Theo's method is here:
Regulating Hohner action

Having recently acquired a Hohner Erica which Theo had modified in this way, I can personally vouch for it. It really does make a huge difference to the action and the speed of the box. It also means that the impact velocity of the pallets on release of the buttons is less, and therefore you get much less pallet noise rattle as a result.

The only improvement I would suggest to Theo's method is to add a facing of thin chamois leather to the wood strip, where the pallet lever arms contact it, to act as an additional rattle-reducing buffer. I am about to try this for myself on another Erica. Will report back....
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: faster action
« Reply #8 on: July 30, 2010, 12:07:51 AM »

I have an improved action melodeon and one regular in CF. I don't totally dislike the feel of the unimproved CF. It is somewhat slower, but mostly just requires a different touch. You learn to reduce the clacking by the touch.

Honestly I don't know why Tony Hall recordings clack so much, I think placement near a microphone enhances it even more than it would sound in person, like fret noise in classical guitar recordings.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: faster action
« Reply #9 on: July 30, 2010, 12:18:25 AM »

Thanks Steve - based on your comments I will carry on when I get the chance. I've not looked inside yet but if the variation of lever height was not huge I wondered about using a wood strip topped with some rubber or closed cell neoprene strip so that there was a degree of 'crush', if they are all over the place then Theo's method of filing a groove for each lever to come to rest in will obviously be needed but I can certainly see chamois giving just that little bit of cushioning effect as it will conform with the grooves - and it's a traditional material  ;)

I was horrified to see he used RH cross point screws but assumed these were only for convenience while the strip went in and out for filing, shame we didn't see the finished job with those shining brass slot headed countersunk screws in custom sunk countersinks, previously occupied by steel screws to size them so the slots line up and candle waxed against removal in a century's time - then I thought, even if his name was Castagnari I doubt he could charge that much for levelling a few buttons  ;D ;D

Thanks for your 'guides for the incurably interfering and impecunious squeezboxers' Theo, I have downloaded both this and the reed tuning pics for my further education - are there any other hohner related sections of Gibb equivalent of Haynes Car manuals out there ??

Gypsylad, your thread well and truly hi - jacked but hopefully to your enlightenment as well

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: faster action
« Reply #10 on: July 30, 2010, 09:43:42 AM »


The only improvement I would suggest to Theo's method is to add a facing of thin chamois leather to the wood strip, where the pallet lever arms contact it, to act as an additional rattle-reducing buffer. I am about to try this for myself on another Erica. Will report back....

In practice you get no audible noise from a wooden strip,  soft material will give a softer more spongy feel to the action and a less precise stop, so its worth doing if you like that kind of feel.

I was horrified to see he used RH cross point screws

Best tool for the job in this situation.  Very light gauge screws needed, brass would be a bit flimsy.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

GeeTee

  • Member
  • *
  • Offline Offline
  • Posts: 5
    • Little Johnny England
Re: faster action
« Reply #11 on: July 30, 2010, 12:19:03 PM »

I've not used Hohners for a long time but we used to use car floor mats cut to the same shape as the finger board and slide it in behind the levers reducing the distance the buttons can travel.If you're going to try this make sure you tighten the two long bolts that hold the finger board on evenly rather than one at a time if that makes sence.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: faster action
« Reply #12 on: July 30, 2010, 02:03:23 PM »

I've not used Hohners for a long time but we used to use car floor mats cut to the same shape as the finger board and slide it in behind the levers reducing the distance the buttons can travel.If you're going to try this make sure you tighten the two long bolts that hold the finger board on evenly rather than one at a time if that makes sence.

The trouble with this method is that if you use thick enough material to limit the button travel to flush with the fingerboard surface then you can't get the fingerboard back on!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

GeeTee

  • Member
  • *
  • Offline Offline
  • Posts: 5
    • Little Johnny England
Re: faster action
« Reply #13 on: July 30, 2010, 02:16:06 PM »

Good point it was a long time ago.The mat cannot be flush but then there's no need for it to be.
 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: faster action
« Reply #14 on: July 30, 2010, 02:20:12 PM »

does any one know of any easy peasy tricks to make the trebble action quicker? i can play repeated notes alot quicker on one box than i can on the other, any ideas?

Going back to the original question - if there were "easy peasy tricks to make the trebble action quicker" we would all be using them, as would the builders of our instruments!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: faster action
« Reply #15 on: July 30, 2010, 03:26:38 PM »

Thanks for the clarification Theo, as I don't have any Red Cedar, do you think Ash sapwood would give similar results and ignore the rubber strip ? I happen to have lots of ash  (:)

As for the screws, much as I dislike the look of cross points I am guilty of using them but that doesn't stop me pulling the legs of those who do likewise, however, when visible or if replacements for originals I do try to use traditional fixings - one of my main gripes is people using post WW2 Whitworth and BSF nuts / bolts in restorations of earlier machinery (head sizes were reduced for wartime economy and never re enstated)

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: faster action
« Reply #16 on: July 30, 2010, 04:27:21 PM »

I would certainly not allow a Philips or pozi head anywhere near my 1943 Indian,  When I have to use modern bolts I even file off the lettering from the blot heads so that they look the part.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: faster action
« Reply #17 on: July 30, 2010, 05:46:42 PM »

this is on a paolo soprani elite 1 , i can rattle notes, but it seems a bit more sluggish than my gabbanelli, it feels like it could be something to do with springs, i think the reeds in the gabby are "cheaper" than the soprani, so it maynot be that, i will have a check with rees next weekend, if i can find him!
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: faster action
« Reply #18 on: July 30, 2010, 05:50:26 PM »

I'll be in the Kings.  :|glug
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

sqwzboxstudent

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 977
  • dartmoor / gypsy style
Re: faster action
« Reply #19 on: July 30, 2010, 06:50:16 PM »

me too, and all my clan! better warn em...! :|glug
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal