Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: How do you stop it ?  (Read 4798 times)

0 Members and 1 Guest are viewing this topic.

Fungusface

  • SAOR ALBA
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 300
  • SAOR ALBA
How do you stop it ?
« on: August 09, 2010, 07:54:03 AM »

How do you stop that Tinny sound you hear on Hohner Pokerworks or the Hohner "Slap" on the bass.
Logged
If you wish peace, friendship, and quietness: listen and look and read

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How do you stop it ?
« Reply #1 on: August 09, 2010, 08:08:05 AM »

Not sure what you mean by the 'tinny' sound. Perhaps the instrument needs a re-tune?

The 'Hohner slap' is the noise made by the impact of the pallets on the table (the wood panel with the holes in it). The slap is particularly noticeable on the bass end, where the springs are quite strong, returning the pallets with quite a force. The treble end is also prone to the slap noise.

The facing material on the pallets may be thin, and/or old and hard. This will contribute to the noise. On my Erica, the original facing material was very thin leather, less than 1 mm thick. I replaced this with a 2 mm leather/felt combination, obtainable from Charlie Marshall. The pallet noise has been very much reduced. Definitely worth doing.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How do you stop it ?
« Reply #2 on: August 09, 2010, 02:26:34 PM »

A lot of the bass end rattle seems to be from clearance in the pinned joints, a little plier work can reduce it a lot but how long it will last I don't know, pallet slap - wondered if some chamois instead of the felt would be a little kinder, yet to experiment.

All the moaning and squealing - try running reed wax along all those little springy metal bits in the ali plates, I think the basic problem is that they are too short and only rivetted on at one end..................

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How do you stop it ?
« Reply #3 on: August 09, 2010, 02:28:56 PM »

I love the sound that pokerworks make if you sound the bass loud and then close the pallett and the reed carries on for a short while and all you can hear is the mechanical sound of the reed vibrating :)

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How do you stop it ?
« Reply #4 on: August 09, 2010, 04:43:05 PM »

pallet slap - wondered if some chamois instead of the felt would be a little kinder
The stuff I got from Charlie Marshall was a two-ply facing consisting of 1 mm felt and 1 mm soft chamois-type leather. Seems to have done the trick quite nicely.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How do you stop it ?
« Reply #5 on: August 09, 2010, 05:54:08 PM »

Chamois is actually a poor material for this,  it's surface is not smoothe enough and the thickness is not even enough. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How do you stop it ?
« Reply #6 on: August 09, 2010, 05:58:31 PM »

Thanks for that Theo, probably saved me a fix and strip job :)

Something like shammy (calf ??) was used on a harmonium I stripped a while ago and it appeared to have lasted the test of time compared to an earlier one which was felted (and both had survived the woodwork, more wormhole than remaining timber hence the 'recycling'

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How do you stop it ?
« Reply #7 on: August 09, 2010, 06:17:03 PM »

The stuff I got from Charlie Marshall was a two-ply facing consisting of 1 mm felt and 1 mm soft chamois-type leather. Seems to have done the trick quite nicely.

Chamois is actually a poor material for this,  it's surface is not smoothe enough and the thickness is not even enough. 

I don't know very much about the way leather is described, so perhaps I am using the wrong terminology. The leather part of the felt/leather facing material I got from Charlie Marshall is soft (like Chamois) but is quite fine-grained and even in thickness and texture.
What should I be calling it?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: How do you stop it ?
« Reply #8 on: August 09, 2010, 06:35:44 PM »

I have relined the treble pallets of a few of my boxes with the material sold by CGM (soft leather on felt) and it was a big improvement. Just make sure the pallets rest flat on the table after the thicker material is applied.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How do you stop it ?
« Reply #9 on: August 09, 2010, 07:03:49 PM »

Probably on thinnish ice but has anyone experimented with the black closed cell (I think Neoprene) foam sheet - usually with a self adhesive backing as used for watertight gaskets or as cushioning in things like cases for calipers etc ? Not certain if I'd trust the adhesive other than on a sealed surface but at about 2mm and quite soft it conforms nicely so ought to seal without clacking.

Steve F - when last I visited Barkers Tannery at Otley (to see their steam engine before they shut down) they had a variety of Victorian machinery which split hides from various animals to differing thicknesses and then either buffed, burnished or brushed the flesh / skin / split sides from a near mirror smoothness through to a very downy suede, they had so many trade names for each finish and degree of tan that I lost track. IIRC Chamois is the name of the goat from which the leather comes but these days seems to be used to describe a variety of skins of the wash leather sort, I have seen this as Theo describes where the thickness varies considerably, I suspect this is the less accurate split and the better, constant thickness part is used for higher class goods like Gloves so it probably depends on how good a bit you end up with :D

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How do you stop it ?
« Reply #10 on: August 09, 2010, 08:54:00 PM »

The stuff I got from Charlie Marshall was a two-ply facing consisting of 1 mm felt and 1 mm soft chamois-type leather. Seems to have done the trick quite nicely.

Chamois is actually a poor material for this,  it's surface is not smoothe enough and the thickness is not even enough. 

I don't know very much about the way leather is described, so perhaps I am using the wrong terminology. The leather part of the felt/leather facing material I got from Charlie Marshall is soft (like Chamois) but is quite fine-grained and even in thickness and texture.
What should I be calling it?

It's called pallet leather - doh! Available from Russels and other organ building suppliers.
Beware of ordinary chamois as it can be porous.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How do you stop it ?
« Reply #11 on: August 10, 2010, 12:21:44 PM »


It's called pallet leather - doh! Available from Russels and other organ building suppliers.
Beware of ordinary chamois as it can be porous.

I completely fail to understand why people want to experiment with different materials for a job. 
Especially when the traditional material:
(a) does a good job
(b) is inexpensive and easily available
(c) the proposer of the new "problem solution" has not yet tried the traditional material and found it wanting

The kind of repair jobs I find most frustrating are those where some previous repairs have to be undone first, making the job longer and therefore more expensive for the client.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: How do you stop it ?
« Reply #12 on: August 10, 2010, 03:24:20 PM »

I completely fail to understand why people want to experiment with different materials for a job.  
Well, I can understand your point, but also consider that when the "traditional" way was found, the only materials available were leather and felt. Now we have new, different materials that may (or may not) do the same job, possibly better, possibly worse. Only time and usage will tell. But it's sometimes tempting to get into experimenting. Nevertheless we know that leather over time will dry and lose its properties and we know what to do about it.

Steinway learned their lesson the hard way when they decided to use Teflon bushings instead of felt in their keyboards in the 1960's. They thought this new material would be better and more durable than good old felt, but usage proved otherwise when bushings were slipping out of their holes due to wood contraction and expansion. They had to recall the pianos and put good old felt bushings!

Many years ago I used to collect and repair classic cameras, one problem we had with many Canon SLR models is that the foam that they used in various places as a light-blocking material and mirror damper was turning into goo after about 10 years... The material was going back to its original liquid form! At the time they decided to replace felt with high-tech foam it probably seemed like a good idea.

Conclusion: stick to the traditional ways!
« Last Edit: August 10, 2010, 03:26:00 PM by Québécois »
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: How do you stop it ?
« Reply #13 on: August 10, 2010, 03:32:47 PM »

I completely fail to understand why people want to experiment with different materials for a job. 

They could be just as good or better and if nobody tries then we won't know.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How do you stop it ?
« Reply #14 on: August 10, 2010, 04:42:51 PM »

I've nothing against experimenting with new materials,  but I think you have to get some experience use the tradional materials so you have something tocompare with.  Eg felt and leather that detriorates and has to be replaced after a few decades seems to me to be a pretty good material already but if there are obvious defeciencies I'm the first to look for something better.  Hohner pallets faced with just leather is a good example.  They are fine for airtightness,  but notoriously noisy,  so  even in fairly new instruments it may be worth replacing with leather on felt.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: How do you stop it ?
« Reply #15 on: August 10, 2010, 06:37:08 PM »

I have found that the "trimmings" from leather used to upholster fine furniture makes excellent pallet material.  It's typically thin and of very high quality and usually inexpensive or free for the asking.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How do you stop it ?
« Reply #16 on: August 10, 2010, 07:45:12 PM »

Just called in a long standing 'favour' and have now got a nice piece of pallet leather (as used by organ builders) sitting here, hopefully it will be enough for both Hohners if used carefully and is the right type !

Will have to clean out the old glue kettle prior to a brew up - one of the few workshop smells I hate  :-\

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How do you stop it ?
« Reply #17 on: August 10, 2010, 08:16:01 PM »

Just called in a long standing 'favour' and have now got a nice piece of pallet leather (as used by organ builders) sitting here, hopefully it will be enough for both Hohners if used carefully and is the right type !

Will have to clean out the old glue kettle prior to a brew up - one of the few workshop smells I hate  :-\

Richard
Ordinary Bostik 'all purpose' glue is fine for fixing pallet leather to wooden pallets. Recommended by Charlie Marshal, who supplies the stuff.
I've just refaced the pallets on a Hohner Erica. I used the Bostik and it worked just fine and was easy to use. Nowhere near as smelly or inconvenient as using hide glue in a kettle.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: How do you stop it ?
« Reply #18 on: August 10, 2010, 08:56:51 PM »

Ordinary Bostik 'all purpose' glue is fine for fixing pallet leather to wooden pallets. Recommended by Charlie Marshal, who supplies the stuff.
I've just refaced the pallets on a Hohner Erica. I used the Bostik and it worked just fine and was easy to use. Nowhere near as smelly or inconvenient as using hide glue in a kettle.

And, for a change, the Solvent Free version is better. Easier to handle than the flammable type especially if you are sticking all the pallets onto a sheet at one go.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: How do you stop it ?
« Reply #19 on: August 10, 2010, 11:14:12 PM »

Thanks Steve,

I may well try Bostic (or a similar leather glue I use for splicing belts for the watch lathe) on the DG when I get round to it, however the first to be done is the early Hohner 1 row which, while having no value, in view of its age I am trying to 'conserve' where possible and the old glue on the pallets is hoof glue - I'm so glad that the experts of the parish warned against using chamois, although a century on the old leathers look more like it than the proper stuff - no wonder they clatter and leak.

It has also developed an interesting new noise, not apparent before but several of the lower press note leather valves are fluttering and making dare one say here, a farting sound, as are some of the bass - first off I thought that it was the valves I had removed when flattening their reeds and had perhaps not repositioned them properly but it is as bad on some of those still intact from factory - I'm guessing that perhaps its something related to the damp weather we've just got, can't see any sign of them fluttering against the reedplate internal walls or underside of pallet table and given their age they were (surprisingly) not dry and crispy (no oiling or other treatment)  any ideas ?

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal