Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Tuning reeds. Easy or hard?  (Read 6879 times)

0 Members and 1 Guest are viewing this topic.

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Tuning reeds. Easy or hard?
« on: August 10, 2010, 07:21:10 PM »

So there I was at Sidmouth and I wanted my Bb accidental to be put onto the pull instead of the push and an E major chord made into an E minor one. I went to a melodeon repair man at his stall and he sat down while I watched flipped the offending Bb reedblocks over and gave them a bit of a scrape with a little buzzing tool that looks like something a dentist would use - also scrapes the E minor note that needs changing, he then checks it as he works on an electric tuner. It doesn't take very long and soon enough my box is in my hands set up how i want it and all sounds fine. It looked easy......


Is what this man just did easy or hard? Im not talking about changing a boxes key or anything like that, just stuff like tuning a slightly out of tune reed.

all the best, Jake

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Tuning reeds. Easy or hard?
« Reply #1 on: August 10, 2010, 07:24:14 PM »

Not as hard as you think, not as easy as it looks...
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Online Online
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Tuning reeds. Easy or hard?
« Reply #2 on: August 10, 2010, 07:30:42 PM »

Well, is it easy or hard to play a melodeon? I mean...
there I was at Sidmouth and there was this bloke sitting there with a squeezebox in his hands and he just pushed and pulled on the bellows and pressed buttons and music came out - it looked easy....
 >:E >:E >:E

It's not hard to fix a single reed, but even the process of scraping material off a reed to change its pitch has a right way and a wrong way, and right and wrong tools to do it with... To get a set of reeds performing optimally is a fine skill, and you also have to learn to tune them without damaging them.

Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tuning reeds. Easy or hard?
« Reply #3 on: August 10, 2010, 09:58:43 PM »

Good advice, Mr Cool.
I couldn't have put it better myself.

Come to the Devon SqueezeBox Foundation Access All Areas Melodeon Maintenance Day (bit of a mouthful, Mr Rennie!) and find out how easy it is to damage reeds. See relevant thread.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Tuning reeds. Easy or hard?
« Reply #4 on: August 11, 2010, 01:06:46 AM »

I wish I could come to that, but I believe that I am playing with the Gogs that weekend :(
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Tuning reeds. Easy or hard?
« Reply #5 on: August 11, 2010, 02:57:50 PM »

Not as hard as you think, not as easy as it looks...
Very unforgiving task! No going back if you make a mistake... Great fun nevertheless. Practice on spare reeds before doing the ones that will go in your box.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Online Online
  • Posts: 325
Re: Tuning reeds. Easy or hard?
« Reply #6 on: August 11, 2010, 06:53:23 PM »

and practice with hand tools not things that go buzz, a small file or a sharp scriber, little at a time.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Tuning reeds. Easy or hard?
« Reply #7 on: August 11, 2010, 09:32:33 PM »

Hard!

If you have a little dabble with the odd slight fix on a reed here and there with success ... don't let that fool you in to a false sense of security.

There will always be that first time that you do exactly the same thing with a reed and then it doesn't speak, warbles or just sounds weak or wrong in a way you didn't expect.  This is followed by a lot of scrabbling around blindly to try and fix the problem without knowing what's causing it and ends with you going sheepishly to a "proper" tuner to fix or replace the reed you buggered up.

There are just so many factors which make a reed speak correctly and sound nice and to the untrained eye - these little factors are almost invisible but make a huge difference.  It's the same feeling tuning with the wrong file or using the file incorrectly - you'll think you're being delicate and the reed doesn't shift much in pitch at all and suddenly, you'll make what you think is the same stroke and it will sharpen the reed by 20 cents (much worse on little high reeds!).

I hate tuning and voicing reeds.  I am just too impatient / lack the necessary attention to detail.  That is certainly not to say don't have a go ... you might be brilliant!  But definitely take the advice given here earlier to try it out on beaten up old boxes first.

I think I respect people who become good at tuning more than I do any other craftsman because I have tried it and it is painfully difficult to be brilliant at.  Respect to all you tuners out there.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Tuning reeds. Easy or hard?
« Reply #8 on: August 11, 2010, 09:50:44 PM »

Hard!

If you have a little dabble with the odd slight fix on a reed here and there with success ... don't let that fool you in to a false sense of security.

There will always be that first time that you do exactly the same thing with a reed and then it doesn't speak, warbles or just sounds weak or wrong in a way you didn't expect.  This is followed by a lot of scrabbling around blindly to try and fix the problem without knowing what's causing it and ends with you going sheepishly to a "proper" tuner to fix or replace the reed you buggered up.

There are just so many factors which make a reed speak correctly and sound nice and to the untrained eye - these little factors are almost invisible but make a huge difference.  It's the same feeling tuning with the wrong file or using the file incorrectly - you'll think you're being delicate and the reed doesn't shift much in pitch at all and suddenly, you'll make what you think is the same stroke and it will sharpen the reed by 20 cents (much worse on little high reeds!).

I hate tuning and voicing reeds.  I am just too impatient / lack the necessary attention to detail.  That is certainly not to say don't have a go ... you might be brilliant!  But definitely take the advice given here earlier to try it out on beaten up old boxes first.

I think I respect people who become good at tuning more than I do any other craftsman because I have tried it and it is painfully difficult to be brilliant at.  Respect to all you tuners out there.

I agree that a reed can 'not sound right' for a lot of maddenly different reasons.  But, on the other hand, an accordion reed is a piece of steel.  Very tough and very forgiving of mistakes, in my experience. 
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Tuning reeds. Easy or hard?
« Reply #9 on: August 11, 2010, 10:03:05 PM »

Quote from: waltzman link=topic=4696.msg5964

I agree that a reed can 'not sound right' for a lot of maddenly different reasons.  But, on the other hand, an accordion reed is a piece of steel.  Very tough and very forgiving of mistakes, in my experience.  

Yes - I have to agree with that.  However that doesn't make it any easier to diagnose the little adjustments you need to make!

I didn't want to sound like it was witchcraft - although I have felt like it was in the past.  Just to point out that when tuning dabbling goes wrong, it becomes a much bigger subject very quickly.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Tuning reeds. Easy or hard?
« Reply #10 on: August 11, 2010, 10:16:39 PM »

and practice with hand tools not things that go buzz, a small file or a sharp scriber, little at a time.
Tell that one to Pete Grassby! (:)
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Online Online
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Tuning reeds. Easy or hard?
« Reply #11 on: August 11, 2010, 11:07:52 PM »

and practice with hand tools not things that go buzz, a small file or a sharp scriber, little at a time.
Tell that one to Pete Grassby! (:)

I suspect he is the culprit described in the original message.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Tuning reeds. Easy or hard?
« Reply #12 on: August 12, 2010, 04:45:06 AM »

Probably easier if you have all the tools you need, a tuning gig, an oscilliscope, and most important, an experienced person to help out when it all goes wrong.

That's a lot of conditions, so I'd say hard for most people.

I tuned my harmonica reeds, they'd last about a month, then fail.
Logged

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Re: Tuning reeds. Easy or hard?
« Reply #13 on: August 12, 2010, 10:06:31 AM »

Hi, cheers for the advice people.

About pete, yeah he was the guy who tuned my melodeon - it was a little thing that looked like a dentists tool. Should he not have used that? or do you mean that its a tool you should only use if you really know what your doing?

jake

HallelujahAl

  • Guest
Re: Tuning reeds. Easy or hard?
« Reply #14 on: August 12, 2010, 10:24:46 AM »

I've tuned and restored a number of concertinas for folk over the last few years - and the pressure not to mess up is pretty acute when you're handling someone's beloved Wheatstone Aeola. When it comes to my own instruments I'm quite cavalier - but when it's someone else's... :Ph
AL
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning reeds. Easy or hard?
« Reply #15 on: August 12, 2010, 10:25:53 AM »

Hi, cheers for the advice people.

About pete, yeah he was the guy who tuned my melodeon - it was a little thing that looked like a dentists tool. Should he not have used that? or do you mean that its a tool you should only use if you really know what your doing?

jake

Pete always uses his Dremel for tuning and has done a number of quick fixes for me (for free) at Witney and they have always been successful and there have been ho longer term issues. But other tuners do not recommend the use of such tools.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Tuning reeds. Easy or hard?
« Reply #16 on: August 12, 2010, 03:17:25 PM »

You can make your own dremel tool from a lady's personal fan, and a round bit from a hobby store. Cost me about $4 usd. Works on harmonica reeds.

I always took away steel at a 45 degree angle. Rinse and repeat as necessary, small amounts at a time. Usually  top portion of reed to raise pitch. Factory marks did help, where someone else tuned.

I understand a hobby file is much better. Use of the steel of an old 3 1/4 disk under the reed worked well as a support. Thin enough, yet stable.
« Last Edit: August 12, 2010, 06:13:44 PM by stevejay »
Logged

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Re: Tuning reeds. Easy or hard?
« Reply #17 on: August 12, 2010, 04:36:10 PM »

Ah i see, well pete did do a good job on my box its sounding great, and having played it exclusively for a couple of years as i only own one melodeon I really would notice if something was amiss. however I can appreciate many tuners have their own ways and perhaps would use a different approach than pete - If anyone has any very strong views on this do feel free to PM me  ;D

I think If I were to tune a set of reeds I would first go to a tuner I know to see how they do it and what tools they would recomend. then get a broken old accordion/ melodeon to practice on.

FYI I am not planning on immediately doing this, it just interests me as something i might do one day for fun

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Online Online
  • Posts: 325
Re: Tuning reeds. Easy or hard?
« Reply #18 on: August 12, 2010, 08:30:36 PM »

DOnt think Im critising small power tools for tuning. In practiced hands a small rotary grind stone can work very well and leave a great finish but they are not for the beginner and take much more practice to be consistent with. On small fine reeds you have to make sure the direction of rotation is towards the tip of the reed or they can crumple - I learnt the hard way.


Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Tuning reeds. Easy or hard?
« Reply #19 on: August 12, 2010, 10:42:56 PM »

Hi, cheers for the advice people.

About pete, yeah he was the guy who tuned my melodeon - it was a little thing that looked like a dentists tool. Should he not have used that? or do you mean that its a tool you should only use if you really know what your doing?

jake
The latter!
I have a box with a bass conversion that Pete did with a grinder. Still OK twenty years later which must prove something!
Maybe a bit OTT for spot tuning, I get the impression that the use of Dremel type tools is frowned upon more for aesthetic reasons than anything else.
(Sole  thing I have against them is that it is the only tool that has managed to put me in hospital.)
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal