Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Bespoke Grille  (Read 7650 times)

0 Members and 1 Guest are viewing this topic.

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Bespoke Grille
« Reply #20 on: August 13, 2010, 11:14:19 PM »

Only problem with a water cutter is the hourly cost.  Even with recent reductions in price (a decade ago they were around a quarter million for one to do this type of work) they are not cheap and that is reflected in the hourly cost.  They (like lasers etc) really come into their own for bulk, repeatable work (100 melodeon grills) not for one offs.

Steve
Logged

Huw

  • Member
  • *
  • Offline Offline
  • Posts: 47
  • Dino black pearl II / Saltarelle Nuage DG / FR-18
Re: Bespoke Grille
« Reply #21 on: August 14, 2010, 07:24:49 AM »

Huw
Is this is the site you are trying to relocate?
http://yvusaccordeons.free.fr/anglais/yvus-accordions.html
Cheers     John]
Well done John , yes thats the site fantastic aren't they, didn't get the Hascy, so what about a Yvus..............
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Bespoke Grille
« Reply #22 on: August 14, 2010, 09:52:55 AM »

Being more of a metal butcher than worker, I've found some useful insights here. The water cutting method sounds ideal if it weren't for the cost.

I've tried various methods of cutting out my evolving design (i.e it started out far too elaborate) on scrap pieces, including fretsaws and nibblers. The best fretsaw was a very old one with a round (as opposed to flat) blade which, if the kerf was properly allowed for, gave the cleanest and most accurate cut. Naturally I broke the blade and nowhere can I find another. Any recommendations on suitable tools would be gratefully received.

The worst thing is cleaning up the cut edges, as it is very easy to alter the design subtly when filing or stoning, so that it doesn't exactly match the paper template. I've got enough stainless sheet for 5 tries, if I don't despair and hand the job on to someone else.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Bespoke Grille
« Reply #23 on: August 14, 2010, 08:46:13 PM »

True Steve, I was forgetting my devious ways might not be so common, you go to the back door during lunch time, take a bu@@ered attempt, a scale drawing of what you want, a blank sheet (and a playable box) look dumb and / or pathetic and find a fabricator, they will not be able to resist improving on your poor attempt and you may even get the job done for nowt - (playing for them would in most cases be an added bonus), if this happens you must insist on them having a fiver / tenner for the tea fund or for a drink for the lads - never know when you might want another.
Universal rule #1 of fabricators, never work for a firm where you can't do 'foreigners'.

I bought some steel tube for bench legs last summer from our local fabricators, it came out of a length which had been badly bent and no real use to them so there was a discount, I next asked for some short bits as runners across the top and was pointed at the offcuts bin - take what you need, when the 'swedish brick' could hold no more I went back to pay 'more trouble than it's worth, glad to see it being used' says the man, so left a fiver for the tea fund. Last week I was filling up with petrol and gets a tap on the shoulder - the same chap "you ought to come and have a look in the offcuts bin as its going to be emptied next week" - another rear suspension straining visit later I have finally run out of undercover space to store steel stock :)


Prestidigitator - I usually get my piercing saw blades from Proops over near Leicester (although off their stand at Model Engineering shows which always has a concertina or two displayed as one of their number is a hexboxenist)

their url - http://www.proopsbrothers.com/acatalog/index.html

Piercing Saw Blades Ref: M0276
72 Assorted Largest Dim 150mm Price: £3.95

Am I right in thinking you a Suffolkist ? do you ever get Norwich way ? in which case you can have a look / try of my stock blades and find a suitable one to send as a sample of what you want - their mixed packs are good unless you have a particular job likely to wreck a number of one size - oh and use a lump of tallow / paraffin / beeswax touched on the blade periodically to keep the blade lubricated - they last longer.....

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Bespoke Grille
« Reply #24 on: August 14, 2010, 10:08:37 PM »

For decent metal cutting saw blades try here http://hegner.co.uk/system/index.html.  Follow the links the Hegner machines, then scroll saws, then blades.

The spiral blades are not really meant for metal (which is probably why your's broke.

Steve

Typos fixed
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Bespoke Grille
« Reply #25 on: August 14, 2010, 11:41:50 PM »

I know of Hegner scroll saws by their (excellent) reputation Steve but didn't realise they did a piercing saw size - I'll have to give them a try - and tis true that the Proops blades are not top quality like the Swiss blades which Walsh supply but if they are not forced I find them pretty durable by hand and they even stand up to use in my (cheap, nasty, not Hegner) scroll saw reasonably well if I keep the speed down.

I've had mixed results with spiral cut blades, dry in brass and wet in Ali works reasonably but can't recall ever trying one on stainless - Abrafile used to make a variety of lengths and cuts of about 1mm dia material which worked well on SS in a saw frame but I've not seen them about for years - no doubt someone on the web is selling them but I've not looked - cut down for a fret frame I used about 3 to cut out my weathervane in 2mm stainless (a Fowler BB1 ploughing engine) many moons ago and swore I'd never do another  (:)

Pdigitator, whatever you do in stainless, do it with the tool working slower than for a similar cut in mild steel, especially drilling, rarely do electric hand or pillar drills have a low enough speed and sawing / filing even in thin sheet can still harden it, which then takes the edge off the tool. and if nothing else a rub with a candle on the blade will help ease your way.

Richard
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Bespoke Grille
« Reply #26 on: August 15, 2010, 09:50:22 AM »


Am I right in thinking you a Suffolkist ? do you ever get Norwich way ? in which case you can have a look / try of my stock blades and find a suitable one to send as a sample of what you want - their mixed packs are good unless you have a particular job likely to wreck a number of one size - oh and use a lump of tallow / paraffin / beeswax touched on the blade periodically to keep the blade lubricated - they last longer.....

Richard
Richard,
That's a very generous offer; and thanks for the advice. I'm Southwold way (one of the few natives, in fact) and I do get to Norwich from time to time. My son lives there, and I like to listen to Tony H whenever I can. It was hearing him (and some of the old Suffolk boys in various pubs hereabouts) play when I was at the art school there in the 60's that persuaded me to give up playing the 5-string banjo very badly and play the melodeon even worse. Might get the hang of it one day, I hope.
Some time after Henham Steam Rally in September is likely best for me, and I'll PM you then, if that's OK.

Thanks,
Peter
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Bespoke Grille
« Reply #27 on: August 17, 2010, 09:12:45 AM »

It'll be very hard work with a fret saw. They are really for wood, although I've seen a chap fenestrate the old 1d coins with this to make jewelry.  Fred uses a plasma cutter for his thin metal fretwork. I guess lasers are the coming thing industrially - but perhaps not for the artisan.
Logged
  _       _    _      _ 

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Bespoke Grille
« Reply #28 on: August 17, 2010, 03:36:04 PM »

Piercing saw is the metal cutting equivalent of a fretsaw Chris, frames are typically not so deep but blades are interchangeable - long and laborious job all the same  :(

@Added 17/08 - Chris, have seen the same done with the old 1/2d with a ship on the reverse having had its rigging etc cut out - a labour of love ! @

Lasers / plasma cutters are fine but especially in stainless the clean up is a real PITA as the edges and burrs harden and discolour the steel hence my suggestion of waterjet (where you can stack the work so could make 10+ at a time and there is little if any cleanup needed) As Steve pointed out the capital cost of these is enormous which is reflected in the 'front door' prices charged, however it is a method of preparation which a lot of model engineers are now using economically compared with milling out of the flat for things like locomotive frame parts and entire wagon part sets, they design in slots and tabs so you can 'kit build' say a set of frames and then weld over the tabs to secure  (:)

The other possibility I'd not considered earlier is someone who does deep engraving on a CNC machine but it still needs a scale drawing as a starting point and hardening rears its ugly head again

Richard
« Last Edit: August 17, 2010, 10:13:11 PM by Broadland Boy »
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

boxlad

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 291
    • Ray Ó Díomasaigh
Re: Bespoke Grille
« Reply #29 on: August 17, 2010, 04:06:13 PM »

Here is one that has been redone on a Paolo Soprani. It looks like a nice job and was carried out by Benedict Koehler. Google him for more info.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290462207418&ssPageName=STRK:MEWAX:IT#ht_500wt_1154
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Bespoke Grille
« Reply #30 on: August 17, 2010, 04:52:09 PM »

What thickness of stainless steel are we talking about here?  I've a bit of free-er time coming up so I might have a play.

Steve
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal