Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Putting 48base on a black dot  (Read 2074 times)

0 Members and 1 Guest are viewing this topic.

nomad

  • Good talker
  • **
  • Offline Offline
  • Posts: 70
Putting 48base on a black dot
« on: September 05, 2010, 10:23:55 PM »

Hello.

I have a hohner black dot and would like to put a stradella 48 base on it. The bellows measure 280mm x 150mm where they join the base. Does anyone know what type of accordion would be a suitable match.
I am working on the principle that I will only need to remove the base end and stick the new base end on.
or if the size doesn't match perfectly I could manufacture a timber collar, one side to fit the bellows and the other to fit the new base end.

Thanks
 :||:
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Putting 48base on a black dot
« Reply #1 on: September 05, 2010, 10:27:35 PM »

There are some black dots in existence with 12 bass in stradella layout.  Have you tried one of these?   I know someone who may have such a box looking for a new home.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: Putting 48base on a black dot
« Reply #2 on: September 05, 2010, 11:18:37 PM »

You are fairly unlikely to find a 48 bass PA which is small enough to match to the standard Double Ray / Erica body. The type of PA which has been used to provide a 48 bass end to a Double Ray DeLuxe and Trichord sized body is the Student IV or La Divina, which measures 315 x 180mm, a fairly sizeable difference. I'm not saying smaller ones don't exist, but I didn't see any when looking for a 48 bass PA to match to a Hohner Trichord.

As well as mating the bass end to the bellows, you would also need to make a larger air hole and pallet in the 48 bass end and an air bar/lever to operate it.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Putting 48base on a black dot
« Reply #3 on: September 05, 2010, 11:22:37 PM »

As i already have the box i thought i could pick up a small PA box cheaply, very cheaply.


I might be able to arrange an exchange of left hand ends!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Accordion Dave

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
Re: Putting 48base on a black dot
« Reply #4 on: September 06, 2010, 04:42:05 AM »

I have quite a collection of melodeons and small piano accordions. Perhaps I will find Frankensteinable combination.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal