Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Project - Converting to 4th Button Start  (Read 1446 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Hohner Project - Converting to 4th Button Start
« on: September 08, 2010, 11:29:10 AM »

As of Monday when I retire I shall be at a loose end  ;D.

So I am going to start on my project Erica and one of the things that as entered my mind is to convert it to a fourth button start. It currently has low notes rather than accidentals and I would like to add te accidentals and retain the low notes. So my question is, will I need to modify the reed blocks to achieve this other than shorthening the old first button end to take the shorter accidental reeds?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Project - Converting to 4th Button Start
« Reply #1 on: September 08, 2010, 01:16:12 PM »

Probably not.  If it is D/G (the highest pitch produced by Hohner)  the reeds usually have a narrow strip of wood waxed in below the reed plates to take up the space left by the small D/G reeds.  If extra space is needed just leave this out.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal